>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> EMS Converter 1.1
Bookmark topic
Could anyone help? I am using T39m and i used EMS converter to create files. Two files were created with extension .em1 and .hx1. I renamed the .em1 file to .emy and sent to my phone thru infrared and it doesn't work. But the format inside seems to be right.
Please feedback ASAP.
I even changed the version format to VERSION:1.0. It doesn't work at all.
[ This Message was edited by: gavinwys on 2002-01-26 17:19 ]
--
Posted: 2002-01-26 17:16:00
Edit :
Quote
I dont believe that Imelody will work on current software. My guess is, that we will have to wait for the MMS-upgrade.
I'm not entirely sure, so if anybody knows for sure, please write !
jan
--
Posted: 2002-01-26 18:05:00
Edit :
Quote
what do you mean by current software? Are yous saying software inside the phone? If that's the case, what does this EMS converter 1.1 for? You can use notepad to open files that are converted, It shows Imelody format. The sample is shown below
BEGIN:IMELODY
VERSION:1.2
FORMAT:CLASS1.0
MELODY:
END:IMELODY
Or can anyone elaborate how to use the files created by EMS converter 1.1?
--
Posted: 2002-01-26 18:24:00
Edit :
Quote
Gawin : I mean phone-software
And I wrote, that I didnt know for sure.
Somebody mentioned it earlier.
When you write Emelodies in win-notepad,
you have to remember when saving : to "show all fileformats". And save as EMY.
Then the notepad-text is converted to an EMY-file.
Do you have to do this as well when making Imelodies ? I mean, save as IMY ??
I just donloaded the converter-thing,..and I havent read the manual on Imelody yet.
I'll have a look at it later
jan
[ This Message was edited by: jh67 on 2002-01-26 18:37 ]
--
Posted: 2002-01-26 18:31:00
Edit :
Quote
Damn then, means i have to upgrade the firmware? Shit..this will be troublesome.
Jan, one thing that i am confused about..Ericsson phone supports Imelody but how come it doesn't work with the Imelody file?
It stated here too, supports Imelody
http://home.hkicable.com/djk/telecom/t012.htm
--
Posted: 2002-01-26 18:38:00
Edit :
Quote
Gawin : The places I've seen were it says something about Imelody, is usually the same places, were it says MMS-software.
Thats why my guess was, that Imelody only will work, once we get the new software in the phone (should be week 10).
As I wrote earlier, I dont know for sure, as I havent read the manual on Imelody yet. I know how to make emelodies work, but havent tried imelody out yet.
On the other hand,..if Imelody should work with other Ericsson phones,..then it should work with T-68 too.
I wish someone in here could answer the question for sure.
Guess we should ask
about it
jan
--
Posted: 2002-01-26 19:58:00
Edit :
Quote
Gawin : I just asked the
support, if Imelodies could be used with current software,..or if we need mms-software.
Jan
--
Posted: 2002-01-26 20:03:00
Edit :
Quote
Hi.
I am ust posting a reply by one of the b.board members at Ericsson Mobility word Forums. Here is his reply about how to send ems to the phone:
There is a couple of ways to get an EMS to the phone:
* the real way: send the EMS to a gateway which sends it to a phonecompanys SMSC (SMS-Center). That ships it through the air to your phone. You need some good contacts to a phonecompany and a lot of time to get a gateway up and running.
* use a datacable to talk to the modem in your phone. I think that Siemens has made a device called M20 where you can type in hex and post it to your phone. You could also talk to the modem via a datacable and a hyperterminal. You'll have to switch to binary mode and write to the phones memory.
* Do the same but by infrared.
* Do the same but by BlueTooth.
I'm working on a toolkit for you guys so you can send EMS by serial cable, infrared & bluetooth right now. It will be done in a few weeks.
Best regards
Theis
--
Posted: 2002-01-27 03:07:00
Edit :
Quote
God, I am using T39m. Is there any MMS upgrade for T39m? If no, then finish.
For the EMS Converter 1.1, I used notepad to save it as .EMY format and also .IMY format. It doesn't work after sent to my phone thru infrared.
.EMY file can be sent to my phone but nothing comes out whereas .IMY could not be sent, it prompts error message.
[ This Message was edited by: gavinwys on 2002-01-27 07:35 ]
--
Posted: 2002-01-27 07:22:00
Edit :
Quote
Where can I get some ringtones or logos to convert???
--
Posted: 2002-01-27 11:07:00
Edit :
Quote
New Topic
Reply
