>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> W800i joystick rubber
Bookmark topic
http://cnn.cn/shop/index.php
im gonna buy one from there
--
Posted: 2006-04-27 01:45:43
Edit :
Quote
BUFFBOY - Excellent - Thanks.
--
Posted: 2006-04-27 02:54:21
Edit :
Quote
O.K. I've ordered mine from CNN.CN. jcr11 - I'm guessing there is no need to remove back cover - was it just a case of undoing the 2 torx screws and prying off front cover? Is the joystick then easily pulled out or do you have to lift the keypad circuit board? I'm only going off photo's I've seen of a K750 being pulled apart so I'd like to be pretty sure of what I'm doing before I attempt it.
--
Posted: 2006-04-27 07:58:10
Edit :
Quote
Here's a fix for your problem:
http://www.esato.com/board/viewtopic.php?topic=119691#post1623115
...that is, if you want to do it....
--
Posted: 2006-04-27 09:49:19
Edit :
Quote
It happened to me as well before, tried to put it back but I can't seem to stuck it in even with a glue. I decided to let it be like that.
--
Posted: 2006-04-27 11:14:49
Edit :
Quote
Quote:
On 2006-04-27 07:58:10, mongoose3800 wrote:
O.K. I've ordered mine from CNN.CN. jcr11 - I'm guessing there is no need to remove back cover - was it just a case of undoing the 2 torx screws and prying off front cover? Is the joystick then easily pulled out or do you have to lift the keypad circuit board? I'm only going off photo's I've seen of a K750 being pulled apart so I'd like to be pretty sure of what I'm doing before I attempt it.
its pretty easy.. just dont force it
--
Posted: 2006-04-27 11:18:17
Edit :
Quote
take the two screws from under the battery, remove the memory card and put your thumb in the slot. this forces the housing apart some.
now you can use a plastic tool to prize apart the bottom then up the opposite side.
next prize the memory card side and its apart.
the joystick cover will just pull off easy, no need to unclip the keypad/lcd or camera flex'.
to reassemble, start by put the bottom of the front cover on first then work up the sides.
at the top, you will find the main body and front fasia dont meet properly. you can put your thumb on the top of the main part and put pressure downwards while pushing the front in. you'll hear it clip.
thats all
--
Posted: 2006-04-27 14:21:16
Edit :
Quote
Great - Thanks. I'll just have to play the waiting game for the joystick to arrive in the mail.
shaliron - Your referral on page 1 to the fix was my post - It really worked O.K. and I was quite happy with what I had done. It wasn't a bad idea considering I had had a fair bit to drink at the time I did it and submitted the post. But now that I have physically damaged the actual joystick (taken a chunk out of it) I need to replace it.
--
Posted: 2006-04-27 16:24:37
Edit :
Quote
cool
--
Posted: 2006-04-29 14:04:58
Edit :
Quote
Oh yeah, I knew that
Hopefully your new joystick fixes the problem entirely.
--
Posted: 2006-04-29 16:09:25
Edit :
Quote
New Topic
Reply
