>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Accessories
> All about Mitsumi Bluetooth adaptors
Bookmark topic
So is the D-Link software the best? When I use my D-Link dongle with software, I get reception quality (both for phone and a PDA) showing only two bars - ie, Signal Too Weak. The only way I have managed to improve is by holding the dongle right next to the other Bluetooth device.
Is this just my dongle???
--
Posted: 2002-11-05 15:06:00
Edit :
Quote
As originally posted by peterhk
Quote:
On 2002-12-12 05:34, peterhk wrote:
Keyword: Mitsumi Bluetooth Dongle T68 Dial Up
Ok everyboday, after 2 weeks of hard work I made it possib le. I can dial up via Bluetooth using Window XP and my T68 Bluetooth.
Here's how:
1.Create a new Modem in Controlpanel
2.Don't let Windows search it, choose it from the list
3.Choose the T68 Bluetooth Driver from the list
4.Here's one of the tricky points: When assigning a COM port to the modem, make sure that it runs on the right one. Which one ? Start Mitsumi Bluetooth suite and check out all Bluetooth Serial ports. The DUN port is the one you are looking for (in my case COM5). Assign the newly created modem onto COM5 (in this case).
5. Create a DIAL UP connection using the new modem
6.Reboot
Ok so far so good. Here we continue:
1.Make sure that Ericsson Phone Monitor is NOT installed
2.Start Mitsumi Bluetooth suite
3. Don't do anything. Maximum you could do is to RIGHT click onto the empty window to search devices if your phone doesnt show up. BUT DONT PAIR NOW !
4. In your T68 choose: CONNECT:BLUETOOTH:PAIRED DEVICES
5. If there is your computer already, delete it. I dont know why, but it only works like this.
6. More strange even. Click on ADD Device, but LET PHONE ACCEPT. If phone initiates it doesn't work either !
7. Go to your dial up window and click Connect
8. You DialUp will talk to COM5 where it suspects the modem
9. This will make the Bluetooth suite to give you a message: SOMEONE TRIES TO TALK ON COM5 VIA BLUETOOTH
10. Click CONNECT
11. Phone will ask you to accept the other Bluetooth partner
12. Click ok. Assign a 4 digit number of your wish
13. On your Computer you will immediately be asked for this number. enter it and press ok
14. The phone will start to dial !!
15. make sure that DATASERVICE is enabled with your servicerprovider, otherwise the connection will break.
16. if later the conenction breakes for any reason, you need to do the shit again from the point where you need to delete the already existing bluetooth computer on your mobile phone.
17. Try 1 or 2 times if it doesnt work directly. Always to delete the PC Entry on your T68 in Devices.
congratulations !!
No I am on my next quest, to upload pictures/photos to my t68. How long will that take ? Your help is very appreciated !! ^_^
--
Posted: 2002-12-12 06:14:00
Edit :
Quote
I used the mitsumi software (which admittedly sux) without incident, and tried out the Widcomm software...which I really liked...It worked great and was a breeze to use!
Still no file transfer capability with the DBA-10!
--
Posted: 2002-12-12 08:01:00
Edit :
Quote
I've searched this site for a solution to my problem but still can't figure out what I'm doing wrong.
I have a Mitsumi BT USB adaptor and I am able to send files from my PC to my T68i via the Mitsumi software so I know I'm getting connectivity. The problem is that I CAN'T get XTNDConnect to synch with the phone. When I select Synchronize in XTNDConnect it will try opening a connection and then it will tell me "Unable to detect phone. Verify that the phone is connected to the PC." I've been reading around and it seems like I need to change or add something in the Mitsumi BT Serial Ports settings. It defaults to SERIAL (COM5), DUN (COM6), LAN (COM7), FAX (COM8) but there's no option I can find to add or modify these. Can someone please guide me through setting up XTNDConnect with my PC and please dumb it down since I'm new to all of this? I am trying to get this setup on Win2k and WinXP.
--
Posted: 2002-12-12 15:55:00
Edit :
Quote
The piece that you are missing is with the SonyEricsson Software.
First you need to install the SonyEricsson Phone monitor (this should have been already installed with the package for XTNDConnect).
Goto Control Panel (I'm doing this from XP by the way) and open up phone monitor options.
Select the COM Ports tab. Here you need to select the correct com port (serial) to communicate with your phone. Depends on the settings for Mitsumi. If mitsumi has set Serial as COM5 then that is the port you need to highlight in the Phone Monitor. Then you need to click on the Enable button for that COM Port. If you will only be using the phone with this port (Bluetooth Serial) then you can also click on reserve. Once that is done, open XTNDConnect...it should now open the Phone Monitor and identify a new Phone and SIM Card. Once that is done, XTND Should work.
Hope that helps (if the Serial Profile does not work, you may want to try another)
--
Posted: 2002-12-12 18:53:00
Edit :
Quote
Well, I've tried absolutely everything and still can't get the Mitsumi adaptor to work with the SE synch software. Even trying to install other BT software and messing with the btwusb.inf file. I could only find 1 site that showed how to do it using Acer BT software and it was French. I tried following Funks instructions from the above post but the link to his btwusb.inf does not exist. Anymore ideas before I run this thing over with my car?
--
Posted: 2002-12-18 03:56:00
Edit :
Quote
Before running it over with you car, send it to me for christmas!
--
Posted: 2002-12-19 21:50:00
Edit :
Quote
hi there
i just bought a mitsumi bt adaptor
the problem is i can send from pc to hp
but not from hp to pc
any1 can help me?
--
Posted: 2003-03-16 15:02:00
Edit :
Quote
New Topic
Reply
