Esato Mobile
Sony Ericsson / Sony : General : Important please help!
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > General > Important please help! Bookmark topic
Page <  123>

tranquil Posts: > 500

What you refering to there will take longer than the life time of your phone. I always charge up my phone when I feel like it, no problem at all. Just stick it in and have a good nights sleep. This post was posted from a T68i
--
Posted: 2002-10-14 23:24:00
Edit : Quote

Korova Posts: 344

http://www.esato.com/board/viewtopic.php?topic=5503&forum=15

Quote from porterg:

"lithium batteries can really be charged up any time you want. They should really last years (some manufacturers claim 20, but that is probably overstated). The battery should last longer then the phone. Nickle metal take about 500-700 before they are toast, and will hold less and less charge cause the cells die. NIMH don't have memory. I have a 3 year old lithium for a t28w that still works perfect, and I have pure abused it in terms of charging. If was a nimh, would have been dead in 6 months.

Never leave a battery on a charger for more then 24 hours, you are over heating it. If the batt is getting real warm, try a different outlet, or remove from outlet after a couple hrs. With a SE batt, their experienced techs will tell you to always charge for at least 1 1/2 hours for a full charge, no matter how much is left.

Also, take the battery off the phone periodically. If you have ever bought regular rechargeable batteries, you will see that the instructions say to take the batts off the charger as soon as charged. Basically, the phone is part of the charging unit, even if not plugged into the wall charger. Leaving on the phone can cause freezes. What follows next comes from an SE phone designer at their US plant in north carolina. She said that because the batts tend to stay on the "charging unit (the phone)" all the time, the batts can get locked in a loop, causing phones to respond strangley, things like freezes or no LCD, so taking the batt off usually fixes this. She also said the explanation may be BS, but it works. I have seen alot of t68m's that the 0 button freezes, nokia 3395's where there is no LCD, but you knwo the phone is on, etc., and taking the batt off almost always fixes the probs."

--
Posted: 2002-10-14 23:28:00
Edit : Quote

ScottTUK Posts: 119

How do I know what type of battery I have ~?
--
Posted: 2002-10-14 23:47:00
Edit : Quote

Korova Posts: 344

Take the battery off your phone and look at what it says!

Li-Polymer Standard Battery

Li = Lithium
--
Posted: 2002-10-14 23:50:00
Edit : Quote

ScottTUK Posts: 119

So if its Li polymer can i charge it freely? without having to run the battery down?
--
Posted: 2002-10-14 23:53:00
Edit : Quote

Korova Posts: 344


I suggest you re-read the posts in this topic... the answer is in there somewhere...
--
Posted: 2002-10-15 00:02:00
Edit : Quote

ScottTUK Posts: 119

Ive re read it still dont understand is the li polymer the same as the li?
--
Posted: 2002-10-15 00:06:00
Edit : Quote

mixin Posts: > 500

just bloody charge it, its not gonna ruin the battery, unless you keep the phone for 5000000000000 years
--
Posted: 2002-10-15 00:22:00
Edit : Quote

sunjivas Posts: > 500

YES CHARGE IT!!!!!!!!!!!!!!!!!!!!
IT WILL NOT MESS UP UR BATTERY!!!!!!!!!!




--
Posted: 2002-10-15 00:51:00
Edit : Quote

Korova Posts: 344

Rechargeable batteries started life as, Ni-Cad = Nickel Cadmium, these had memory, if you didn't drain THEM properly you might as well have bought some Duracell batteries. Then they moved on to Ni-MH = Nickel Metal Hidride, (not too sure on spelling) these were better. Then came Li-Ion = Lithium Ion and now we have Li-Polymer = Lithium Polymer, you can do what you want with the Lithium batteries! As everyone has already said... your phone will die before your battery does!
--
Posted: 2002-10-15 02:05:00
Edit : Quote
Page <  123>

New Topic   Reply
Forum Index

Esato home