Sony Ericsson / Sony : Software, Firmware and Drivers : SEUS stuck on 100%,still says 'do not touch the phone', help!
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> SEUS stuck on 100%,still says 'do not touch the phone', help!
Bookmark topic
ok done that,all seems ok so far,phone is on n looks ok wiv new FW n dont look like i lost anything yet either,i'll post back here if i get any probz,thx mate
--
Posted: 2007-02-03 19:45:02
Edit :
Quote
I'd suggesting master reset then update again, just to be on the safe side. If SEUS says you're already up-to-date, choose to update anyway.
--
Posted: 2007-02-04 06:45:32
Edit :
Quote
@koolezt:
Not everyone has that option... Don't really know why. (I have it, and a generic (world 1) phone.)
--
Posted: 2007-02-04 11:40:16
Edit :
Quote
same thing happened to me. stuck at 100% for more than 30 minutes. I just unplugged the cable and shut down SEUS. everything is working fine and I didn't upgrade again. it made me scare for just a while though.
--
Posted: 2007-02-04 15:51:36
Edit :
Quote
SEUS is an online service. If the net connection is interrupted you know what happens then..so the best way is find the best time when internet traffic is not congested.
--
Posted: 2007-02-04 16:11:00
Edit :
Quote
@boyi did u noticed any bug?
This message was posted from a 6233
--
Posted: 2007-02-04 17:24:11
Edit :
Quote
The same thing happened to me ages ago and I just unplugged the usb, not had any problems with the phone and it did update the firmware.
--
Posted: 2007-02-04 18:27:42
Edit :
Quote
It happened with my w800 once. The next time I updated it was ok.
--
Posted: 2007-02-04 22:41:49
Edit :
Quote
Quote:
On 2007-02-04 16:11:00, aremaboy wrote:
SEUS is an online service. If the net connection is interrupted you know what happens then..so the best way is find the best time when internet traffic is not congested.
doesnt seus d/l the firmware before it starts flashing so theoretically it shouldnt need a connection after it has the f/w which should eliminate connection problems?
--
Posted: 2007-02-05 08:12:21
Edit :
Quote
correct, the new firmware is fully downloaded before the flashing begins and this is an obvious way to do it in order to avoid problems with unreliable connections to the net
Ive seen this never ending 100% problem a few times but its never caused an issue for me so I assume that once the flash has completed, something in the cleanup process is causing an issue that stops SEUS continuing further
--
Posted: 2007-02-05 08:16:38
Edit :
Quote
New Topic
Reply
