Sony Ericsson / Sony : Software, Firmware and Drivers : What's wrong with these? (pictures)
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> What's wrong with these? (pictures)
Bookmark topic
I agree with SPU, I have a MXE-60 and with some modded drivers the sync between the flash and the camera is wrong and the flash doesn't light the picture enve though it flashes. The green tint may be the very last bits of light from the flash meaning the timing could be off be 1/1000's of a second
I recommend either the stock driver or SPU's 1.3 beta 3 with is what I use
--
Posted: 2007-06-12 22:52:06
Edit :
Quote
@jason - I see that it's the mxe-60 that I sold you some weeks back mate . . . well, we've already discussed the problem here thru - PM I guess.
When I am taking images using the xenon flash (to get BEST results) . . . I turn-off the lights where the object is placed (say, living room et al) . . . of course, it should be night time. I notice that images are not that SHARP if the sensor detects presence of even small amount of LIGHT
Don't ya worry dude (when it's totally DIM) when taking images, because when you press the shutter on your K750 (half-pressed) the built-in LIGHT on the K750 will LIT (so you will still be guided when shooting the object) prior to the xenon's . . . flash
!
_________________
[ This Message was edited by: *Jojo* on 2007-06-13 00:58 ]
--
Posted: 2007-06-13 01:52:50
Edit :
Quote
@ Jojo - Almost all the time I take pictures with the MXE-60, I get good results... But the problem with me is that I always look for errors... The blockage of the flash solve some of it... Now, the last problem is what the above pictures describe... That's why I love modding...
@ SPU - I've used the stock driver 5.3 from Sony... I only adjusted the COMPRESSION VALUE from 04 to 05, put in FAST and FULL RANGE focus, FORCE FLASH ( seq_e from 04 to 03 ) and VR modes NORMAL 44 NIGHT 1E. Maybe the NIGHT mode didn't synchronize with the MXE-60 flash... Can you give me a camera driver optimized for my MXE-60 flash? That I would really appreciate it...
_________________
YoU tHinK yOu KnOW mE...
K750w + ZUZA 2007
[ This Message was edited by: MarkJason on 2007-06-13 02:35 ]
--
Posted: 2007-06-13 03:30:26
Edit :
Quote
@mark - Try to be contented with GOOD results from hereon . . .
Good Luck !
--
Posted: 2007-06-13 03:34:22
Edit :
Quote
@ Jojo - I can't... That's how I was born...
I'm a bit stubborn with these sort of stuffs... or maybe I want the problem to be solved coz my lola's bday is coming up and maybe there will be a party at our place... the pictures above... I want to show off my photo skills
naahhh... May K750i with your MXE-60 flash... I think they will be amazed... coz they are not into gadgets and seeing my phone+flash combo will make them go WAO! hehehe!
--
Posted: 2007-06-13 03:53:33
Edit :
Quote
@jason - Good Luck ! But if there are special occasions in the house, say, birthdays or reunions . . I always rely on - digicams
I know you can make those shots good dude !
--
Posted: 2007-06-13 04:31:01
Edit :
Quote
@ SPU - I've tested your driver and here are the results... Hope you could fix this...
--
Posted: 2007-06-16 06:55:02
Edit :
Quote
MarkJason
What you can say about original unmodified SE driver? Is there the same problem?
--
Posted: 2007-06-16 16:43:00
Edit :
Quote
@ SPU - I maybe... solved my own problem... I've used 4.5 original driver for R1BC002 firmware... Coz my K750i was flashed with W800i firmware... And the greenish / dark are somewhat gone... If the background is kinda greenish i just adjust the EV... But still it's not perfect... But it's almost ok... Thanks for the help and time... I really appreciate it...
--
Posted: 2007-06-18 06:14:42
Edit :
Quote
New Topic
Reply
