Sony Ericsson / Sony : Software, Firmware and Drivers : k810i dead.only red light near IR blinks
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> k810i dead.only red light near IR blinks
Bookmark topic
i tried with a full charged battery...but no use..
what would be the problem if battery is not charging??
none of the servicing centres in my city were able to fix the problem..
anyway this is my last post for today..
thanx for your suggestions friends..
please tell me what may be the problem..
--
Posted: 2008-09-01 20:45:42
Edit :
Quote
Try flashing the phone with another full charged battery. That will fix any software related problems with your phone so you may solve your problem or, at least, know if it is hardware stuff...
--
Posted: 2008-09-01 22:13:29
Edit :
Quote
Restoring EROM on DB2020
Supports the following models:
-- DB2020:
K530, K550, K610, K770, K790, K800, K810, S500, T650, V630, W580, W610, W660, W710, W830, W850, W880, Z610, Z710; CID 49/51/52
If your:
-- Telephone is not turned on (but the battery is charged)
-- 6 times flashing red light in the infrared port area
So then you can do it this way.
Attention, be careful! After the upgrade EROM `a through KulanKendi, CID may rise to 53!
1. Download:
KulanKendiClient
2. Run, checkbox note: EROM UPDATE.
3. Push Flash Phone
4. Clamped on the phone buttons 2 and 5 and connect it to cable.
5. After completion of the process, remove battery and try to turn on phone.
[ This Message was edited by: duhhh on 2008-09-02 11:29 ]
--
Posted: 2008-09-02 12:27:27
Edit :
Quote
Don't need to use da vinci wotan or other clients... They are payable. Just use XS++ and put the EROM file as "Flash MAIN firmware" file... Hit FLASH button and you are done.
--
Posted: 2008-09-02 20:36:54
Edit :
Quote
but how can i update erom or flash it
i dont know the CID..
and mobile is not switching on..
--
Posted: 2008-09-03 15:54:10
Edit :
Quote
@strizlow800
please help me
i have connected my mobile to computer waiting for your suggestion..
i have downloaded kulan keendi..
but i dont know the CID..
please tell me what to do now
--
Posted: 2008-09-03 15:57:42
Edit :
Quote
Connect it to XS++. Only connect and it will show detailed phone info in the log file.
--
Posted: 2008-09-03 16:01:49
Edit :
Quote
how to connect it to XS++
--
Posted: 2008-09-03 16:04:18
Edit :
Quote
Download XS++
download and install USB flash driver...
Then remove battery from phone and re insert it...
Click connect button on XS++
plug the phone to USB cable while holding the C button down
you will connect then.
--
Posted: 2008-09-03 16:05:22
Edit :
Quote
19:37:03| XS++ v3.0 beta (Sinyar) Ready !
19:37:03| Executed on Microsoft Windows XP
19:37:15|
19:37:15| Attempting to open the interface...
19:37:15|
19:37:15| TURN OFF PHONE!
19:37:15| Hold 'C' button on phone and connect phone NOW.
19:37:15| You have 30 seconds...
19:37:15|
19:37:45| Error: Cannot open phone communication port
19:37:47| Disconnected... Unplug the phone
this is displayed...
my phone is not switching on...i think that is the problem
--
Posted: 2008-09-03 16:15:32
Edit :
Quote
New Topic
Reply
