>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Technical
> Bluetooth does'nt seem to work
Bookmark topic
I think i've done it all right...
Well i go and return it tomorrow and maybe I'll have it exchanged for an T68i !?
--
Posted: 2002-04-05 00:43:00
Edit :
Quote
I also had difficulty getting bluetooth to work. Here is what I did.
I have a Xircom pc card installed in my PC. I loaded the software from the xircom cd to install their bluetooth environment called Blueview but every hardware will have an equivalent program.
I also installed the XTNDConnect PC software from the Ericsson site.
Of course you have to restart everything to get it loaded.
I then had to "Start a Bluetooth Environment" to make the software actually be able to find another bluetooth device.
You have to go onto the phone and make the phone "Discoverable". This is under the "Connect" choice.
I then opened the Blueview and searched for "New Devices" and it found the phone called "T68".
Then double clicked the T68 choice and five connection choice were offered, DialUp, Serial Port, Serial Port2, Fax, and OBEX. At first I opened connections to all five and it assigned five different virtual COM ports. This was incorrect. Just open ONE serial port connection and note the COM port that is assigned. Mine is COM 9.
Then I went to the Control Panels to Ericsson Phone Monitor, and opened this to hopefully find that the T68 is listed as valid device. If it is you have to go to Ports and "Enable" the same COM port that the Blueview assigned to the device.
Now you should have a complete open connection.
I searched the website
http://www.tsixtyeight.com for "bluetooth" and got a one page offering that explained some or most of this.
It took me two days of installing and uninstalling, before I finally got it to work. Now it works great but what a pain that was. And I still can not get it to connect automatically and have to go into Blueview to reestablish a serial port connection and then it works.
Some other goodies.
Go to
http://www.christersson.org/www/default.asp and get his software for backing up the phone and Sendfile. They are great.
--
Posted: 2002-04-06 17:08:00
Edit :
Quote
T68 has seial port 1 on channel4 (serial port 2 on channel 5). This is used for basic things like phone control.
If you want to run synchronization, you must connect to the channel 11, which offers IrMC Sync.
If you want to send background pictures, you must connect to channel 10, etc...
Channel Service
-------------------
1 Dial-up
2 Fax
3 Voice gateway
4 Serial port 1
5 Serial port 2
10 OBEX data push
11 IrMC synchronization
As you see, that Xircom SW doesn't recognize the synchronization profile.
--
Posted: 2002-04-09 09:06:00
Edit :
Quote
I have the Xircom PC CARD and I can't send files to my ericsson. would somebody help me?
--
Posted: 2003-01-01 15:08:00
Edit :
Quote
New Topic
Reply
