>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Symbian phones
> Pc control tutorial
Bookmark topic
Hey, i have tried VNC and i can connect using other computers, but not using my p900. What is the host? Just the same IP address or should i use "localhost" or "127.0.0.1" or something like this?
I have tried everything but i could connect throught bluetooth.
--
Posted: 2004-01-09 00:37:04
Edit :
Quote
Quote:
On 2004-01-08 22:09:37, skabbe wrote:
whats the point controling it max 8 meters away?
It have the same point as the point of using a remote controll for the tv.
--
Posted: 2004-01-09 00:42:31
Edit :
Quote
So let's start from the beginning:
1- Have you installed the bluetooth drivers on the pc? If so, did you connected your mobile with your pc properly?
2- If you're connected through bluetooth with your pc you can only choose local connection for vnc and your computer (the one that comes as local IP)
3- The range that you'll get is gonna be around 10 meters (no walls) because of mobile's sender range. You'll have to be careful not getting of range or you'll have to come back to your pc to connect it again.
--
Posted: 2004-01-09 13:49:44
Edit :
Quote
bluetooth works great, but i cant conect using VNC, because i dont know what the hell to write on VNCviewer over my p900 to make it conect with the computer. I have tried everything, but it does nothing, sometimes says "sorry, try again", but nothing else. What should it do when conected?
--
Posted: 2004-01-09 14:39:40
Edit :
Quote
I don't exactly remember what I used to manage with VNC but maybe I can help you...
Let's make sure that you have VNCserver running and you have a main user with username and password because no anonymous user is able to connect with vnc.
So you'll have to do the same with VNCclient on your mobile and make sure you have username and password. The Ip you have to type depends on your local IP on your network. You can check it with "ipconfig" or "winipcfg"
If it still don't work I can only tell you to try different version of VNC as I wasn't able to make it run on my first tests on VNCclient for P800.
Hope it helps.
--
Posted: 2004-01-09 17:13:07
Edit :
Quote
Thx for your help, i think my problem was that didnt know that mrouter has another host addres : wsockhost.router
Now it seems to work, but crashes
Let me go on investigating...
--
Posted: 2004-01-09 17:37:49
Edit :
Quote
OK, it was good for something, sorry...
--
Posted: 2004-01-09 17:41:57
Edit :
Quote
New Topic
Reply
