>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Accessories
> T610 face plate change
Bookmark topic
Exactly the same principal. Same wit T610/16/30, T68i fones
This message was posted from a T610
--
Posted: 2004-05-19 23:29:09
Edit :
Quote
T68 snaps off, t610/30 slides off.
--
Posted: 2004-05-19 23:59:03
Edit :
Quote
First take the battery cover off. Then get a blunt screwdriver, and place it to the left of the camera lens under the black cover. Lift gently a few millimeters, and slide the cover off.
DONT DIG DOWN TOO FAR IN WITH THE SCREWDRIVER OR YOU'LL KILL THE ANTENNA !
When the black cover is off, remove the power button, push the antenna upwards with some force - it will slide out. Dont force it too much or you might break the antenna and you wont be able to make calls anymore.
Then unscrew the four screws using a T6 torx screwdriver. Then get a credit card and run it on both sides between the main body of the phone and the front faceplate starting at the bottom. The cover will then be completely removed.
To put it back do the same, except in reverse !
--
Posted: 2004-05-20 18:12:31
Edit :
Quote
New Topic
Reply
