News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > fMA f[??] Mobile Agent, software for sms and phone monitoring Bookmark topic

Is this the thousandth post? Hehe :-D This message was posted from a T230
--
Posted: 2004-10-15 20:26:04
Edit : Quote


@HjJ:

Yeah when I had XTNDConnect Blue Manager installed I could find ports 5, 6, 7 & 8 in the Serial drop-down box in FMA. I tried each indivitual port (as Serial, not Native Bluetooth) but none of them worked (i.e. FMA would just freeze up).

Afterwards I tried this guide http://www.jonsguides.com/bluetooth/ and uninstalled XTNDConnect Blue Manager and installed the (2nd) latest version of Widcomm drivers, but this driver doesnt recognise my dongle due to security reasons (so I've read). He says on his site that there is a way to patch the drivers so that it would work on any dongle, but he had to remove the procedure due to legal reasons. Anyone tell me how to do it????

Really frustrated,
Jek
--
Posted: 2004-10-16 02:50:15
Edit : Quote


@J3K:

The freezing-up part is where MWarner's point 7 might come in handy. I am guessing the COM-port is inactive, meaning FMA will be looking for non-existent HW or driver....

Try to find a way to establish a Serial Port Connection to your phone (with the BT support software), and hit Connect in FMA.

[ This Message was edited by: HjJ on 2004-10-16 10:11 ]
--
Posted: 2004-10-16 11:07:15
Edit : Quote


@HjJ:

Yeah I realised most of that. But no one is yet to tell me how to create a shortcut to my T610's Serial Port.

The bad thing now is that I can't even reinstalled XTNDConnect Blue Manager anymore since the last time I tried to unistall it my computer reset itself half way, which left partial files behind. Now when I try to install it I just get error messages and the setup wizard closes.

So atm my current state is Widcomm drivers that say I dont have the right liscense to use their software. And NO com or serial ports r open.
--
Posted: 2004-10-16 12:21:55
Edit : Quote


Anybody manage to get there contacts photos to pop up when SMS recieved?

Also is there a restriction on how many folders FMA will recognise. In my pictures menu it wont recognise My 'My contacts' folder where i keep all my contacts photos.

Also anyone have any luck syncing calender or atreet addresses?
--
Posted: 2004-10-19 10:00:35
Edit : Quote


@ mwarner:

1. Install the latest Widcomm drivers, currently 1.4.3.4 (I always use the latest version from any vendor, which I patch to work with any dongle). Note that you must rename bth.inf to bth.bak in Windows\Inf *before* installing these drivers if you are running Windows XP SP2.

Where do I obtain the patch from? And the latest drivers? Cheers
--
Posted: 2004-10-19 11:28:33
Edit : Quote


I am not sure if the patch is widely available these days. It was on Jons Guides, but I believe he had to pull it because Widcomm got rather upset! Check your PMs if you would like a copy.
As for the drivers, you can download drivers from whichever manufacturer you like and patch it so it will work with your Bluetooth dongle.

It is possible to patch the files yourself, but the procedure is not for a novice. I used to do it for each revision that came out, until I found someone had made a patch that automates the procedure.

If you want to have a go at patching the files yourself you need to get a hex editor (I think I just used MS Visual Studio and opened the files in hex) and edit the following files:

In C:Program FilesWIDCOMMBluetooth-software
- BTStackServer.exe
- BTTray.exe

In C:WindowsSystem32
- wbtapi.dll

Obviously you should make a copy of them and edit the copies!
After editing you need to shut the PC down, bring it back up in Safe Mode and then copy your edited files back over the installed files.

In the Hex Editor, for each file do a search for the sequence:
83 C4 08 85 F6 0f 85 ef 00 00 00

... and replace the last bit (0f85ef000000) with:

90 90 90 90 90 90

This should effectively disable the security checks. I believe in previous revisions you also had to check for 8BF083C40C3BF5750E3BFD750A and replace 750e with 9090 and 750a with 9090, but if I remember correctly this sequence doesn't occur on the later builds - although I could be wrong! It's been a while since I manually patched a driver set.


As for the drivers, one place you can get the latest drivers is from MSI's web site. A direct link to the driver is found below:

http://us-download.msi.com.tw[....]_bluetooth_software1.4.3.4.zip

Hope this helps!

Mike


[ This Message was edited by: mwarner on 2004-10-20 12:59 ]
--
Posted: 2004-10-19 12:58:21
Edit : Quote


@ mwarner:

!!!!! VERY HELPFUL POST !!!!!!
Thank you! Grant this guy to be an admin! He seems to be the only person around here that knows what they're talking about!

Cheers for the help buddy!!! I owe you a drink


P.S.
Make this a sticky! I'm certain if I had this problem 99% of other ppl have to.

--
Posted: 2004-10-19 18:03:18
Edit : Quote


so does anyone know if it supports the s700 fully? whenever i try .. everything synchronizes except the files folder (With all the pictures, mp3s, videos etc..) it gives 'error: not found' ..... does neone know how to solve this?>
--
Posted: 2004-10-19 23:06:01
Edit : Quote


@j3k
Thanks for your comments .

@ztariqz
I don't believe the S700 is fully supported in FMA yet, but as I haven;t got an S700 I am not sure what the limitations are. I assume you are using the latest revision 0.1.1.16a downloadble from http://fma.sourceforge.net/ ?

Mike
--
Posted: 2004-10-20 13:57:30
Edit : Quote

---

New Topic   Reply

Forum Index