Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-03-30 15:18:34, elevation1 wrote:
kopritis wonderful photos... so your driver is 5.3 original sony and then modded? please can you share with us? i have k750iw800i cid 49... another question but more compression=more quality photo? if yes is very good for me... i don't have problem beacause i have a 2gb memory stick
sorry for my english and thanks a lot
""question but more compression=more quality photo?"" i think so! Look, if i put on my drivers compression 0% the photo has 100% jpg compressed, then photo is very bad. if i put compression 96 the photo has 4% jpg compressed then photo is gr8!...
But if i put on my camdriver 100% compression it meens 0% jpg compressed, then the camera jumps to the first screen.
I see that from Photoshop CS...
So, 96% compression is enough!
[ This Message was edited by: kopritis on 2007-03-30 17:33 ]
--
Posted: 2007-03-30 18:32:48
Edit :
Quote
Common, with 0% jpg compressed, it wouldn't be jpg:)) maybe bmp, these are relative values in driver (like relative in photoshop), I think. Anyway, logic is, less compression (bigger jpg) better screen, how was said above
_________________
Well, I don't now much about IT, but I'm happy O:o) Well, and for support-I have k750i, CID49Brown and R1CA021 firmware;)
[ This Message was edited by: Mr.Kája on 2007-03-30 17:53 ]
--
Posted: 2007-03-30 18:49:16
Edit :
Quote
On 2007-03-30 18:49:16, Mr.Kája wrote:
Common, with 0% jpg compressed, it wouldn't be jpg:)) maybe bmp, these are relative values in driver (like relative in photoshop), I think. Anyway, logic is, less compression (bigger jpg) better screen, how was said above
_________________
Well, I don't now much about IT, but I'm happy O:o) Well, and for support-I have k750i, CID49Brown and R1CA021 firmware;)
[ This Message was edited by: Mr.Kája on 2007-03-30 17:53 ]
maybe if you have EOS300 but in k750 camera 85-96 is no visible difference...
--
Posted: 2007-03-30 18:55:52
Edit :
Quote
On 2007-03-30 03:59:08, stingjoel wrote:
On 2007-03-29 19:09:54, perolrom wrote:
Hi all!
Thank chengrong for your great camdriver!
But I fund a big bug with the 8.54 (the 8.54 for CID49 Other one) with my phone: K750i CID 49 R1DB001:
If I close the camera with the macro mode on.
I cannot use any more the camera:
For 1 second I've the screen of the camera and I can see the macro is still enable.
And after that my phone goes back to the last screen...
I need to upload another camdriver to be able to use again the camera..
@perolrom;
Change your camdriver v8.54 with other camdriver v8.54 in folder "8.54 for CID36 R1CA021"...I hope your problem solved.
Hi!
Thanks it's working now
But we I choose 1632*1224 I cannot change the zoom value: I've an error message.
And If I choose 640*480 I can modify the zoom value only from 1 to 2.5
Is some can help me to modify the 8.54 for CID36 R1CA021 with this fix?
Thanks a lot for you help
--
Posted: 2007-03-30 18:58:13
Edit :
Quote
On 2007-03-30 10:20:08, kopritis wrote:
for all to have this problem with k750 cid 49red R1DB001
"If I close the camera with the macro mode on.
I cannot use any more the camera:
For 1 second I've the screen of the camera and I can see the macro is still enable.
And after that my phone goes back to the last screen..."
this problem with the camera i have it but i solved.
k750 cid 49red R1DB001 -> if you want to solve this problem open the camdriver0.dat with a hex editor and replace that:
cam_vf_sync=5;
cam_ss_sync=5;
cam_ss_sync_9=7;
cam_ss_retries=7;
in to that:
cam_vf_sync=5;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
"Sorry about my english
"
[ This Message was edited by: kopritis on 2007-03-30 09:21 ]
Hi!
Thanks for your answer but the cam driver 8.54 is already with these lines:
cam_vf_sync=5;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
I tried to change those by
cam_vf_sync=5;
cam_ss_sync=5;
cam_ss_sync_9=7;
cam_ss_retries=7;
but it's the same.
See in my last post. I use now the 8.54 for CID36 R1CA021 wich fix this issue.
But now I cannot use (+) and (-) correctly
Thanks a lot
--
Posted: 2007-03-30 19:01:46
Edit :
Quote
Ok here my driver but I don’t guaranty that work fine… it’s only for tests
At my k750i cid49 r1db001 seems to work fine.
http://www.rogepost.com/n/5847671220
--
Posted: 2007-03-30 19:25:48
Edit :
Quote
maybe if you have EOS300 but in k750 camera 85-96 is no visible difference...
Kriomag: I don't understand, what you mean exactly...but I just told, that "0% jpg compressed" seems strange and unreal, and these percent of quality can't be compared to percents in photoshop (how I thing and hope).
My post wasn't important;)
--
Posted: 2007-03-30 21:11:41
Edit :
Quote
My thx to chengrong for adding manual focus to the 8.84 (i use the infinite focus [1.1]) Today I was at a rally, and made very good pix with the moving cars (and they moved fast
). It would be great to fix this driver.. And instead of profiles, add zoom
[ This Message was edited by: norbi_nw on 2007-03-30 20:57 ]
--
Posted: 2007-03-30 21:56:37
Edit :
Quote
um i want to know why is my ENM so bad?? im using 8.53 rite now
o can someone give me the link for 8.54??
wat changes had made in 8.54??
--
Posted: 2007-03-30 23:59:18
Edit :
Quote
This is the 8.54 from firs page :
Download link :
http://s4.quicksharing.com/v/6431224/8.54_update1.zip.html
--
Posted: 2007-03-31 00:26:27
Edit :
Quote
New Topic
Reply
