Esato Mobile
Sony Ericsson / Sony : Software, Firmware and Drivers : Online K700 Firmware update service available
> New Topic
> Topic Locked
Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Online K700 Firmware update service available Bookmark topic
Page <  123 ... 111213 ... 282930>

ukchalky Posts: 69

Plus the fact that @masseur asked them to post details about the changes in another thread... Ok they havent done that yet, but you should be checking there..

http://www.esato.com/board/viewtopic.php?topic=63392
--
Posted: 2004-07-15 16:09:12
Edit : Quote

Rob123 Posts: 75

Looks like it might be possible to de-brand a phone using this online update

Found this on another forum: (for those of you with branded K700i's)

======================================
You can update (and debrand) the software from a branded k700i
you need a unbranded one and put it on the station (dss-20/25)
then the server checks if an update is avaiable and starts downloading it!

While downloading you change the phones on the station and the software (AVR and ARM) will be updated on the k700!
=======================================

--
Posted: 2004-07-15 16:52:08
Edit : Quote

Vlammetje Posts: > 500

Not the way i would personally go if it were my phone, disconnected it and reconnecting another one just might cause an error and abort or worse
--
Posted: 2004-07-15 16:58:29
Edit : Quote

Rob123 Posts: 75

Quote:
On 2004-07-15 16:58:29, Vlammetje wrote:
Not the way i would personally go if it were my phone, disconnected it and reconnecting another one just might cause an error and abort or worse



Some folks here certainly sound deperate enough to do this. If I had a phone that had some of the functionality disabled by the operators I would definitely consider it...... just a thought....
--
Posted: 2004-07-15 17:09:50
Edit : Quote

Bengalboy Posts: 237

For those with an interest....the phone I upgraded is not one of my prototypes, but a production unit purchased directly from Sony/Ericsson at the DevShop. I only flashed it late last night and it takes about 20-30 minutes on a broadband connection. I used the "25" cradle from my P900 to do this. You cannot use an early cradle from the P800 to flash your phone..it must be the "20" or "25"..look underneath the cradle for the model number before purchasing and remember that you could buy the wrong one if it has a round Sony/Ericsson emblem on the front..as opposed to the "25" which uses a large rectangular LED.

I cannot answer any questions about it because I haven't even made a call on it yet..its morning here in Alabama...and I can't really offer any insights into its operation until I've used it for at least a day or so...

Just keep trying...and hold your nose just right...maybe it will "link-up" for you.. My only suggestion is that I performed my upgrade without the SIM in the phone....
--
Posted: 2004-07-15 17:11:55
Edit : Quote

Playahata Posts: 37

I be nuking my phone as soon as i get in lol. Worse thing that could happen is I kill the phone. Have to say not happy with the vodaphone branding.
--
Posted: 2004-07-15 17:14:37
Edit : Quote

dards Posts: 53

I tried the service. My phone is not operator branded. Bought it straight from the SE dealer

R2A041
prgCXC125882_HONG_KONG_C

Customization
CDA 102298/33 R6A
cxc125822 R1A
HONG_KONG

I received this message

'Your device is not permitted to use this service'

Your operator does not approve the usage of this service for this device


what should I do????



[ This Message was edited by: dards on 2004-07-15 16:39 ]
--
Posted: 2004-07-15 17:38:07
Edit : Quote

CyberVisitor Posts: > 500

I never get passed the "Please wait... Checking the installation of Sony Ericsson Update Service" screen on the web. Someone else that managed that?

Also, is it ok if only the "driver" for DSS-25 is installed, or do I have to install some other software too (like mobile phone manager)?
--
Posted: 2004-07-15 17:51:23
Edit : Quote

Dovern Posts: 407

dards:

i suggest you wait for few more days and then try the service again but lot of people getting this message at this moment. i got same firmware version like you....
--
Posted: 2004-07-15 17:52:51
Edit : Quote

blueday Posts: 43

You can update (and debrand) the software from a branded k700i
you need a unbranded one and put it on the station (dss-20/25)
then the server checks if an update is avaiable and starts downloading it to your PC!While this download is running you have to change the mobiles on the station and the software (AVR and ARM) will be updated on the k700!

It seems to work, cos some german guys here tried it!



[ This Message was edited by: blueday on 2004-07-15 18:07 ]
--
Posted: 2004-07-15 19:04:08
Edit : Quote
Page <  123 ... 111213 ... 282930>

New Topic   Topic Locked
Forum Index

Esato home