Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
>
New Topic
>
Topic Locked
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Hybrid Camera Driver for W800i/K750
Bookmark topic
WOW! the green and blue on the building is very clear. Although I still can see some noise, this maybe because it's still early morning and the sun hasn't risen fully. It's nearly 3am here in London, so I'll wait till the morning and see if I can catch the sunrise
... BTW do you use macro still when taking normal photos or do you take it off? when you use the 5.6a?
--
Posted: 2006-09-07 03:47:43
Edit :
Quote
Nice picture, but the sky is overexposed. I would prefer normal settings and exposure compensation, instead of night mode.
I want to ask you about the MXE flash - is it worth buying or should I write a letter to Santa
Why the pictures taken with the flash use more JPEG compression than normal pictures?
@ilabstudios, I was about to ask the same question - why do some of you use macro when shooting non-macro pictures?
P.S. I noticed that some of you have trouble accessing RapidShare. So I uploaded the
collection of drivers (collected by
chakme), including the new 5.6a modifications, to
this site. Try it and tell me if you can access it.
[ This Message was edited by: smuko on 2006-09-07 11:47 ]
[ This Message was edited by: smuko on 2006-09-07 11:49 ]
--
Posted: 2006-09-07 08:23:59
Edit :
Quote
@e_erzan
I really wanna try the 5.6a without spot but my bloody camera switch conpletely broke off a minute a go and now i can't use my camera.
Thanks anyway, Harvey
--
Posted: 2006-09-07 10:14:28
Edit :
Quote
today i've tested the 5.6a w/o spot Camdriver made by our buddy
e_erzan and all i can say was... its a remarkably awesome camdriver i must say.. Big Credit to our mate here
anyway.. Here's the result of your masterpiece
*all picture below are taken on these settings:
Nightmode =
OFF
Quality =
FINE
MacroMode: Close up pic=
ON : Distance pic=
OFF
*
*
*
*
This pic are taken with Nightmode=ON + Macromode...
Comments
This camdriver perform very well on macro shots as far as i can see. on the other hand, Nightmode settings are best way to reduce bit of noises on the pic.. and again, with the Nightmode settings.. there's a choices.. that is... With Nightmode on, it'll reduce a bit noise but you'll sacrifice some of the true colour of the object you going to shoot.. not quite noticeable but when you carefully look on it, you'll spot the different on the colour tone. And for the outdoor shots.. my suggestion are when there's enough sunlight or light source.. no reason to turn on the Nightmode, as you can see on my first picture of the orchid... hardly to spot the noise
ok i think that's all my comments about this new camdriver.. one thing for sure, its worth to try it out
cheers~!
Disclaimer: all this comments are from my personal point of view.. if anyone of you felt uncomfortable or anything, May i apologize first
--
Posted: 2006-09-07 13:57:54
Edit :
Quote
yeah that true what
QuickShare™ just said, thanks to
e_erzan for this driver !!!!
pic with micro is no problem for this driver, but when take pic make sure the distance between camera n the object. if to close the pic will blur.
so anyone know what actually the best distance to take close pic ????
yet again nitemode must be used to reduce noise in some situation. thats why i always take 2 pic, with nitemode off & on. then i see which one is ok then i'll select that
most important is technic and skill to take best pic. if not u cant have best pic with best driver. so anyone have guide on take best pic ???
--
Posted: 2006-09-07 16:08:26
Edit :
Quote
Excellent work e_erzan, I'm sad to sya I do not have a W800i to test out your cam driver personally. But it looks good, maybe the best to date I suppose....cant conclude without seeing more pics, To remove the noise maybe you should edit the Nightmode settings to make it a bit faster or adjust the normal settings which are under night mode to make it a bit slower allowing in more light. I think you should make it a little bit slower will solve the problem....but dont make it too slow.
Regads,
Akshay
--
Posted: 2006-09-07 16:27:29
Edit :
Quote
Quote:
On 2006-09-07 16:27:29, aksd wrote:
Excellent work e_erzan, I'm sad to sya I do not have a W800i to test out your cam driver personally. But it looks good, maybe the best to date I suppose....cant conclude without seeing more pics, To remove the noise maybe you should edit the Nightmode settings to make it a bit faster or adjust the normal settings which are under night mode to make it a bit slower allowing in more light. I think you should make it a little bit slower will solve the problem....but dont make it too slow.
Regads,
Akshay
where had you been mate? i was waiting for your ultimate Camdriver.. as promised by you
wonder was that happening?
--
Posted: 2006-09-07 16:33:17
Edit :
Quote
Ok guys, I've just been out to my highstreet and took a few landscape photos @ a distance and also some sky shots.. Most images are all in nonmacro mode, night, no whitebalance-auto, except the close up photos which are macro, night mode.
--
Posted: 2006-09-07 16:39:45
Edit :
Quote
Thanks a lot for this driver e_erzan. The pics are great quality. Just one question please; is this driver based on 5.3 or 5.4?
--
Posted: 2006-09-07 16:52:06
Edit :
Quote
Some more photos taken with the new updated 5.6a w/o spot
Quality:
Fine
Macro:
Off
Night:
On
Whitebalance:
Auto
Quality:
Fine
Macro:
On
Night:
Off
Whitebalance:
Auto
Night Mode:
Off
Night Mode:
On
This is a photo of a swing on a tree. Notice how the grass is brighter when switched to nightmode and also the darker areas of the tree are now visible! (note: the sun was in the same spot when taking both photos and was the same brightness)
_________________
K750 R1CA021/W800 R1BC002|2GB MSDP|MENU TWEAK|NEW DISPLAYDRIVER/5.6a CAMDRIVER|W810 ACOUSTICS
[ This Message was edited by: ilabstudios on 2006-09-07 16:35 ]
--
Posted: 2006-09-07 17:32:19
Edit :
Quote
New Topic
Topic Locked
