>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> FAQ: Fixing a dead K800i
Bookmark topic
Thanx Tranced
Done flashin to update EROM FOTA, using XS++ 3.1 ...
It went like this :
03:21:30| Baseband ID: 9900
03:21:30| Protocol Version: 3.1
03:21:31| Phone name detected!
03:21:31|
03:21:31| Profiling SEMC phone...
03:21:31| Platform: DB2020
03:21:31| OTP CID: 49
03:21:31| EROM CID: 49
03:21:31| EROM Color: Red
03:21:31| IMEI: 35471601xxxxxx
03:21:31| Phone ID: K800
03:21:31| Region: EUROPE_5
03:21:31| CDA: CDA102511/95 R6A
03:21:31| Firmware Version: R1CB001
03:21:31| EROM: R3A016
03:21:31| Ready for operation!
03:21:33| User chose NOT to update EROM CID!
03:23:03|
03:23:03| Sending db2020_cid01_prodid_p3j.bin...
03:23:03| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
03:23:03| This is a PRODUCTION_ID loader
03:23:03|
03:23:03| Sending db2020_mem_patcher_cid49_r2a006.bin...
03:23:04| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
03:23:04| This is a MEM_PATCHER loader
03:23:04|
03:23:04| Sending db2020_cid49red_flash_r2a001.bin...
03:23:05| Applet ID: 060721 1022 HANCXC1329129_DB2020_FLASHLOADER_R2A001
03:23:05| This is a FLASH loader
03:23:05| Now flashing firmware main...
03:23:05| Flashing e:\\k800i tools\\k800_red_cid49_r3b021_erom-fota_2006-10-12_08\\k800_red_cid49_r3b021_erom-fota_2006-10-12_08.bin
03:23:05| Header type: BABE
03:23:05| 4 flashblocks
03:23:07| Finishing flash
03:23:07| Done flashing
03:23:07| Flashing was successful
03:23:09| Disconnected... Unplug the phone
...............................................
But when I restart my phone, it still shows the white screen. Nuthin changed at all... may I know why? or what more to do?
--
Posted: 2007-11-26 02:31:12
Edit :
Quote
whatcha trying to do?
why dont you full flash the phone? use a FS and a MAIN, then finalize(customize) the phone with xs++.
--
Posted: 2007-11-26 02:35:03
Edit :
Quote
OK, now we know that EROM FOTA will not solved WSOD. Too bad. Do you still got warranty since at this point you'd better go to authorised service centre.
Have you tried kulan? They change their sequence (not 2 5 together, read manual).
You have newer EROM (R3A016) that is not known to make dead/WSOD phone. As I said don't rule out hardware problem. XS++ seems said that your phone is OK.
You may tried updating your firmware to latest SE official R1KG (that way you can bring your phone to SE service centre later on). One thing for sure is that your firmware is very old indeed. There has been 3-4 major revision.
Edit: Last thing is to take out the batt for a while after every operation to make the phone reset itself properly.
[ This Message was edited by: hanugro on 2007-11-26 01:49 ]
--
Posted: 2007-11-26 02:45:21
Edit :
Quote
I want to revive my dead white screen only phone
I plugged it into my computer, but it didn't start normally. Instead, it turned out to be pure white screen with zero activity.
So, I came to read here n there to find a way to revive it...
I'll try to flash it completely just like you sez... thanx for da link. Got them, and now I'll flash it with XS++ 3.1 ... hope it works..
--
Posted: 2007-11-26 02:54:29
Edit :
Quote
Ah.. thanx Hanuguro. But aaa, I dun have any warranty, ehe. Thats why I'm tryin hard to solve it myself, that if I can
So, can I go on with da flash again? fully with Main Firmware n File System? you said that my firmware is very old, so if I flash it with the files given by Tranced.. can it be solved?
And how about the XS++ 3.1 askin to upgrade my CID...? Would it be any good if I done that?
[ This Message was edited by: Sinnerz on 2007-11-26 02:02 ]
--
Posted: 2007-11-26 03:00:39
Edit :
Quote
Ah, If you don't have warranty then let's try everything. My concern is that your login with XS went smoothly so software seems fine. (it may be cabling/connection problem with your phone's LCD).
Yes you may try flashing fully. There are two files MAIN and FS. Both must be in the same version Number (eg R1KG, etc). You will need MAIN_GENERIC and FS_EUROPE5 of the firmwares. Don't forget to choose EUROPE5 customization as well in XS++.
You have to upgrade CID as there is no R1KG CID49. You can't put CID52 firmware to CID49 phone.
Finally don't forget to take out batt after operation and turn it on for the first time.
Edit: All your data will be lost with fully flashing firmware but I think it is no concern to you at this point.
[ This Message was edited by: hanugro on 2007-11-26 02:24 ]
--
Posted: 2007-11-26 03:20:15
Edit :
Quote
Geez!! Thanx guys!! After I've done fully flashing... my phone come back alive once again... !! So happy. Thanx Hanuguro and Tranced
With FS_AMERICA.. works too eh..
I hope everybody that have this problem, same as mine.. can revive their mobile once more...
--
Posted: 2007-11-26 04:10:05
Edit :
Quote
I am glad it work out. I really have no idea whether XS++ can safely update CID but I read someone has done it before successfully. BTW, it is a really good software.
Well, I suggest you use at least R1KG firmware anyway. Seems lot of place offering EUROPE5 FS with that ver. It is one of the best and SE official latest release. What firmware version are you on now?
--
Posted: 2007-11-27 15:21:53
Edit :
Quote
Hy, my K800/10 fall yesterday and it after that it resets itself, over and over again, I've flashed it with firmware and FS but NOTHING. Can anyone please help me? I don't know how to revive it.
Thanks in advance!
[ This Message was edited by: Norby C. on 2007-12-16 07:46 ]
--
Posted: 2007-12-16 08:44:59
Edit :
Quote
Guys, sorry for not replyin sooner.. had some problems with internet connection almost a month!
BTW.. my phone juz get back to it's white screen condition.. it happen when I want to 'restart' my K800... just like that. Why eh? anybody have any clues?
This is the log when I want to reflash it just now..
XS++ v3.1 (Darwin) Ready !
02:26:16| Executed on Microsoft Windows XP
02:26:20|
02:26:20| Attempting to open the interface...
02:26:20|
02:26:20| TURN OFF PHONE!
02:26:20| Hold 'C' button on phone and connect phone NOW.
02:26:20| You have 30 seconds...
02:26:20|
02:26:28| Baseband ID: 9900
02:26:28| Protocol Version: 3.1
02:26:28| Phone name detected!
02:26:28|
02:26:28| Profiling SEMC phone...
02:26:28| Platform: DB2020
02:26:28| OTP CID: 49
02:26:28| EROM CID: 52
02:26:28| EROM Color: Red
02:26:28| IMEI: 35471601xxxxxx
02:26:28| Phone ID: K800
02:26:28| Region: AMERICA_2
02:26:28| CDA: CDA102511/49 R7A
02:26:28| Firmware Version: R1GB001
02:26:28| EROM: R3A016
02:26:28| Ready for operation!
02:27:12|
02:27:12| Sending db2020_cid01_prodid_p3j.bin...
02:27:12| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
02:27:12| This is a PRODUCTION_ID loader
02:27:12|
02:27:12| Sending db2020_mem_patcher_cid52_r2a006.bin...
02:27:13| Applet ID: 061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
02:27:13| This is a MEM_PATCHER loader
02:27:13|
02:27:13| Sending db2020_cid52red_flash_r2a005.bin...
02:27:13| Applet ID: 061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
02:27:13| This is a FLASH loader
02:27:13| Now flashing firmware main...
02:27:13| Flashing c:\\documents and settings\\lik\\desktop\\k800_r1gb001_main_generic_red49.rar
02:27:13| Header type: Unknown/damaged
02:27:49| Sendinging shutdown signal to phone...
02:27:49| Binary acknowledge failed with: 89
02:27:49| Failed
02:27:49| Failed
02:27:49| Shutting down...
Anybody?
--
Posted: 2007-12-26 01:43:02
Edit :
Quote
New Topic
Reply
