Sony Ericsson / Sony : General : k700i De-Branding now possible with T28 service cable )
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> k700i De-Branding now possible with T28 service cable )
Bookmark topic
I don't recall the T28 needing drivers and yes, it is a serial-port device. When you access the multiserver thing, set the com port to the one you've got the cable plugged into on your PC. and don't forget to copy all your contacts accross to your SIM before you remove it.
[ This Message was edited by: Nipper on 2004-10-06 13:20 ]
--
Posted: 2004-10-06 14:14:45
Edit :
Quote
So My Pc Shouldn't detect it and install it as hardware? I aint to hot on this sorta thing but once im going i tend to be okay. I've plugged it into my printer port, i thought my com ports were my usb ports
--
Posted: 2004-10-06 14:24:53
Edit :
Quote
No prob heppell, thats why these forums are so popular. we all gotta learn somewhere/how. Your PC wont detect the T28 it cos its just a cable. If you follow the instructions on totalserver carefully, when you connect your phone it will be switched off and without the SIM in it so there's nothing for your PC to detect.
You got me worried about connecting it to the printer port though. How you manage that? printer port is much bigger. than serial port. In all, you should have printer port (usually marked LPT1) comms ports (com1, com2 etc) and then the USB's. That help?
[ This Message was edited by: Nipper on 2004-10-06 13:33 ]
--
Posted: 2004-10-06 14:32:48
Edit :
Quote
Yeh sorry, i got it in my com1 port, but its just given me an error of a couple of zeros, and now my phone wont actually turn itself on
--
Posted: 2004-10-06 14:35:05
Edit :
Quote
k, i had this prob. Disconnect the cable from the phone, put the sim back in, boot it up. Wait till its fully booted and turn it off again. take out the sim, put the battery back in and reconnect the cable but dont turn on the phone. Then try again.
--
Posted: 2004-10-06 14:38:24
Edit :
Quote
okay its connecting atc-but now-even though ive payed 8quid to faceoff mobile for the credit-i cant find the files anywhere in order to flash or debrand-as in the original guide? Ive received a confirmation of order from face off-but thats it-what exactly have i brought and how long should it take-it ws the remote unlocking thing for the k700
--
Posted: 2004-10-06 15:01:54
Edit :
Quote
Download the TOTAL Multserver from here:
http://www.totalserver.net/downloads/seunlocklatest.zip
Then run the app, enter your username and password (as supplied by Face Off) and download the relevant firmware files through the app itself by clicking on Download Area.
_________________
This message was posted from a Mac
[ This Message was edited by: JoolsG3 on 2004-10-06 14:11 ]
--
Posted: 2004-10-06 15:08:59
Edit :
Quote
I haven't got a username or password-what should i ahve paid for?
--
Posted: 2004-10-06 15:25:55
Edit :
Quote
You should receive an email entitled "SonyEricsson Log Details" (at least mine was) which reads:
Quote:
Here is your login for the Total Multi-Server unlocking software, download the latest version from
www.totalserver.net/downloads/seunlocklatest.zip
Username: [your username]
Password: [your password]
Please Visit
www.totalserver.net for instructions on how to do any function supported by this server
Failure to read these instructions on the site properly may result in lost credits and credits lost this way will not be re issued
Also remember without a valid screenshot of any errors occured we can not offer any support
Mine arrived within 5 minutes of paying. Try dropping a quick email to
sales@faceoffmobile.com. Although they did say they're busy at the moment.
In the meantime, use "username" and "password" to log-in for testing and downloading firmware, until your credit arrives.
--
Posted: 2004-10-06 15:32:09
Edit :
Quote
they should have sent you an email with a user name and password in it
--
Posted: 2004-10-06 15:33:03
Edit :
Quote
New Topic
Reply
