News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > All about camdriver modding (for modders) Bookmark topic



My last answer to you about this.

1) Genus is another SUPER STAR like you.
2) Command 58 IS WORKING on NORM_MODE macro.
3) I repeat install and check VividColour or Withan.

P.D.- If you say a stupidity then I'll try to explain it, but if you say a stupidity several times then I'm glad to insult you for making us lose time. Don't spam.

[ This Message was edited by: jomateixa on 2008-03-02 19:08 ]
--
Posted: 2008-03-02 20:04:37
Edit : Quote


fight, fight, fight
joma, number1 chill
--
Posted: 2008-03-02 20:05:03
Edit : Quote




quality is not equivalent of compression (at least you can say: 100% quality = very low compression). you don't understand what exactly compression means in JPEG, maybe you should google it?



K770: vendor = Samsung Techwin
K800: vendor = Sony

values for K770 don't have to match in K800. once again especially for you:

1 line: quick after camera open, some seconds later (my driver) whitebalance on
2 line: quick after camera open, some seconds later (your driver) "whitebalance off"


why are you so stubborn? we are not against you, we are against your stupid theories which we can easily blow up while you cannot prove their truth


_________________
K800 R1KG001 (camdriver 6.1)
raider.4shared.com
flickr.com/photos/raiderek


[ This Message was edited by: Raiderski on 2008-03-02 19:15 ]
--
Posted: 2008-03-02 20:11:54
Edit : Quote


Number1
Please stop pay attention bro and try to at least understand what others are saying you and a little engineering could help you

Thanks Number1

But in my opinion the limit file size or buffer size Jpeg is not determined by firmware but is determined by hardware featured by tests and studies but for each model based on the table of JPEG compression

Register MT9V series Micron VGA
[R37]:1—0x125 – Color Saturation Control (R/W)
Default 0x0005=>Values
0x1[25]=>25

Color Saturation Control
#WRITE_IFP(25 0005) // AWB_SPEED_SATURATION (auto)
#WRITE_IFP(25 0055) // AWB_SPEED_SATURATION (125%)
#WRITE_IFP(25 002D) // AWB_SPEED_SATURATION (137,5%)
#WRITE_IFP(25 XXXX) // AWB_SPEED_SATURATION (X%)
Description This register specifies the color saturation control settings.
Bit 5:3 Specify overall attenuation of the color saturation.
000: Full color saturation
001: 75% of full saturation
010: 50% of full saturation
011: 37.5% of full saturation
100: 25% of full saturation
101: 150% of full saturation
110: Black and white

Bit 2:0 Specify color saturation attenuation at high luminance (linearly increasing attenuation from no
attenuation to monochrome at luminance of 224).
000: No attenuation.
001: Attenuation starts at luminance of 216.
010: Attenuation starts at luminance of 208.
011: Attenuation starts at luminance of 192.
100: Attenuation starts at luminance of 160.
101: Attenuation starts at luminance of 96.

Do u read in my post about series MT9V... Micron
Table and Register for VGA series MT9 Micron

post#8
http://www.esato.com/board/viewtopic.php?topic=159467&start=105


[ This Message was edited by: brazuka on 2008-03-02 19:42 ]
--
Posted: 2008-03-02 20:21:07
Edit : Quote


[quote]
On 2008-03-02 20:05:03, milan91 wrote:
fight, fight, fight
joma, number1 chill

No figth!!! Milan Milan


--
Posted: 2008-03-02 20:27:02
Edit : Quote




i know the k770 & k800i are very different but there both still hex values.

maybe this proves the whitebalance off thing
http://www.esato.com/board/viewtopic.php?topic=152275&start=2505
look at danekro's post,
both mine & gprsman 2.2 fix live color have the whitebalance turned
gprsman 2.2 fix live color uses different saturation & contrast values,
genus 5.7 the whitebalance is on and saturation is 07 my driver is almost the same just saturation is 08, and look which driver produces the warmest colours.
--
Posted: 2008-03-02 20:40:49
Edit : Quote






they can be even binary or octal values which doesn't change anything. k770 can accept 0x80 but not k800 as you can see on my pictures

this is idiotic, why i'm trying to prove you my rights? didn't i showed you pictures with nice comparision with my driver and your driver? didn't you noticed that after some seconds white balance is adding blue color to correct too much of yellow color on both drivers? that's the best prove that white balance is ON. now it's your turn - show us your proofs

i don't have strength to continue this discussion. i'm stupid and blind, joma is stupid and blind, you are smart and you have eyesight as the eagle...
--
Posted: 2008-03-02 21:40:22
Edit : Quote


Lol
--
Posted: 2008-03-02 21:45:53
Edit : Quote


your right you should give up trying to prove me wrong, but 1 last thing
if 80 isn't whitebalance off then what is?????
--
Posted: 2008-03-02 21:46:10
Edit : Quote


It's really amazing and funny to view how is defending his "theory" with the REAL PROOF just up to his words. It's for me amazing. I don't have the words.
--
Posted: 2008-03-02 21:48:51
Edit : Quote

---

New Topic   Reply

Forum Index