>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> O2 K700 Online Update
Bookmark topic
@~DC:UK~
thanks for hosting these files...now gotta get me a t28 service cable. will this also work on the dss-20/25? what's the usb cable device driver for?
--
Posted: 2004-11-01 02:42:54
Edit :
Quote
@tomcat
Yeah thinkin that war destoys everything good even cellphones.But just wait and you gonna be back in the international society.
--
Posted: 2004-11-01 09:39:27
Edit :
Quote
@ yellowbox
Multiserver will not work with the DSS-20/25. Apparently the multiserver team were working on it but I haven't heard anything since! For best results use a t-28 unlocking cable.
The usb device driver is for people who bought a non sony ericsson branded cable. Sometimes these cables don't work unless they have a driver that converts the USB interface into a serial, usually called a MAT-USB to Serial bridge so if you have a third party cable and you struggle to get it to work with normal SE drivers then this is probably the driver you need.
--
Posted: 2004-11-01 14:52:48
Edit :
Quote
Lo all, sorry for the delay, I've just got back from a long weekend away getting rat arsed.
here's the link:
http://www.nex0r.org/k700i/
enjoy
--
Posted: 2004-11-01 19:08:44
Edit :
Quote
Quote:
On 2004-10-21 13:48:20, joebmc wrote:
@pimp123
Or has it only got in connectivity "o2-->get settings"?
The o2 get setting feature is specific to the sim, if you put your sim card in a nokia for example the get settings will be under sim services
RJ
--
Posted: 2004-11-01 21:59:09
Edit :
Quote
damnit i thought i could use them files with a dss-25, so its useless to me anyway unless they add support for it.
--
Posted: 2004-11-01 22:11:35
Edit :
Quote
I've just flashed my R2AA003 back to R2L001 with the files but I'm still being told by SE Update that my operator doesn't permit use of the service.
CDA 102286/18
--
Posted: 2004-11-01 23:18:26
Edit :
Quote
Oh bugger, I know what I've done. I accidentally used the R2L001 EU3 files instead of the EU1 files.
Can I just flash the EU1 Language and Customisation files by themselves or do I have to go through the whole procedure in the document (decustomize, then firmware+lang+cust)?
Thanks...
--
Posted: 2004-11-01 23:23:21
Edit :
Quote
I think you should do the whole firmware again to be sure or you could run into compatibility problems. There are subtle differences that could make the phone unusable. A credit only costs £8 so well worth it in my eyes.
--
Posted: 2004-11-02 00:47:54
Edit :
Quote
OK. Another thing - only English T9 is available now. If I successfully update via the SE update service after flashing your files will it restore the other T9 languages?
--
Posted: 2004-11-02 07:18:23
Edit :
Quote
New Topic
Reply
