>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> Sony Ericsson T650i Discussion
Bookmark topic
nebraska,
Not sure but u may try. IMHO, that's only SEUS that may flash single MAIN without touching FS and cust. If u try to do it as I've mentioned then I think to flash all the three files again.
P.S. As I remember, u may put MAIN and FS of the same number and CID but use different custpacks. When flashing with XS, it shows which languages are in a custpack just before flashing so the choice is yours. That's it!
Anyway, u may change everything at any time by reflashing.
--
Posted: 2008-04-09 14:10:51
Edit :
Quote
hello!
This evening I wanted to flash the fw in my phone but when connecting it to XS++ it don't want to start!
It is the first time it makes me that, I've already used XX++ to mod the camdriver and until now no have pbl...
When I plug the phone pressing on "C" it beeps 2 times quickely and nothing change..
what have I done wrong please??
--
Posted: 2008-04-11 19:08:51
Edit :
Quote
On 2007-11-15 00:29:51, iamcrunchie wrote:
1. did you lose the light effects outside of the camera, like when receiving SMS, or with the built in themes?
2. do you have track ID?
3. does the light strip on the back of the camera still light up with sms?
4. any bugs so far?
-thanks in advance for answering the ???s
1. nope all other effects seem to work fine.
2. yes i have TrackID
3. Yes , see 1 :wink:
4. nope no bugs
I did actually have a K770i that i recently got as a free upgrade but i sold it on.
They may be the same phone inside but the casing/buttons on the k770i feel a bit flimsy and nowhere near as sturdy, it is noticeable thicker than the t650i.
The k770i lens cover is very cool though, shame it makes the phone thicker.
I'm sticking with my t650i blue hybrid.
I did actually put the k770i back cover on my t650i, it looked a bit daft with blue/brown contrast but in theory it could look good i guess with the right colour.
[ This Message was edited by: iamcrunchie on 2007-11-14 23:35 ]
Hi!
I'm new around here..And my BlackT650i is on it's way to get to me :)
1)Can you please tell me how to get track ID?
Because I checked sonyericsson.com and this phone (SE black t650i), does not seem to have Track ID as compared to other phones.
2)Do you need an active internet connection for Track ID to work?
3)Also, do high SAR levels actually damage brain cells? :S
Thanks :D
--
Posted: 2008-04-11 20:46:52
Edit :
Quote
nebraska,
Looks like usbflash drivers have crashed. The tend to from time to time.
Try to reinstall them
--
Posted: 2008-04-14 08:58:03
Edit :
Quote
@divya89:
1)It should deffo have TrackID.
2)Yes, you do.
3)Uh, don't bother with that SAR level crap. We've had discussions about this. Sure it can give you a slight headache if you've been talking for an hour or so, but the radio waves don't really cause any damage... at least in the short run (10 yrs.). That has been scientifically proven, too!
--
Posted: 2008-04-14 09:14:11
Edit :
Quote
On 2008-04-14 08:58:03, X-Plode wrote:
nebraska,
Looks like usbflash drivers have crashed. The tend to from time to time.
Try to reinstall them
thanks for ur answer. Yes I reinstalled them but no change. I think it is my usb port, it begins to bug sometimes with some devices. I have to flash my phone with another pc that's the only solution now
--
Posted: 2008-04-14 12:24:56
Edit :
Quote
hello
I've just succeed to flash my phone with SEUS on another pc, everything's ok and now I have the R8BC004 071211 firmware.
My problem of delay in videos is fixed now
I'm going now to install the polish camdriver to see the improvments
--
Posted: 2008-04-19 14:39:59
Edit :
Quote
I've just succeed to flash my phone with SEUS on another pc, everything's ok and now I have the R8BC004 071211 firmware.
My problem of delay in videos is fixed now
I'm going now to install the polish camdriver to see the improvments
--
Posted: 2008-04-19 14:44:21
Edit :
Quote
help I have a new pbl when using xs++....
My phone is recognized, but when I clik on "start FSX" to replace the camdriver, I get an error message:
15:02:15| Hold 'C' button on phone and connect phone NOW.
15:02:15| You have 30 seconds...
15:02:15|
15:02:23| Baseband ID: 9900
15:02:23| Protocol Version: 3.1
15:02:24| Phone name detected!
15:02:24|
15:02:24| Profiling SEMC phone...
15:02:24| Platform: DB2020
15:02:24| OTP CID: 51
15:02:24| EROM CID: 53
15:02:24| EROM Color: Red
15:02:24| IMEI: 35796601xxxxxx
15:02:24| Phone ID: T650
15:02:24| Region: EUROPE_5
15:02:24| CDA: CDA102568/14 R8A
15:02:24| Firmware Version: R8BC004
15:02:24| EROM: R3A022
15:02:24| Ready for operation!
15:02:30| After making any changes with FSX
15:02:30| you must press the 'Shutdown' button
15:02:31| Sorry, your phone is NOT SUPPORTED
15:02:31| Error: FSX failed.
15:02:31| FSX Shutdown!
15:02:33| Disconnected... Unplug the phone
what to do please???
--
Posted: 2008-04-19 15:07:14
Edit :
Quote
oh... I have no luck it is due to the CID53 not recognized by XS++ (and other prog)
I have to wait till a program able to do that see the day....
is it sure that noone replaced his camdriver here with a CID53??
--
Posted: 2008-04-19 15:22:51
Edit :
Quote
New Topic
Reply
