Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-04-12 00:00:21, P&A wrote:
Hi! My nick Pilya. At once I apologize for my English as I write by means of the translator
The Driver with color correction it was developed only for K750 with CID49. For other models it{he} is not necessary, or other correction is necessary.
Hey Pilya, nice to see you here! I think your color correction works great on the W810 and gives better results.
--
Posted: 2007-04-12 02:02:47
Edit :
Quote
On 2007-04-11 23:50:24, duysmil wrote:
mikeypants
what the 3 versions of kriomag driver you use?
cid 36
cid 59
or other cid59 for db.....
For Kriomag's v21.6, I used the file for CID49. It is wonderful!
If you have any more questions, please ask away.
--
Posted: 2007-04-12 02:12:31
Edit :
Quote
On 2007-04-12 02:12:31, mikeypants wrote:
On 2007-04-11 23:50:24, duysmil wrote:
mikeypants
what the 3 versions of kriomag driver you use?
cid 36
cid 59
or other cid59 for db.....
For Kriomag's v21.6, I used the file for CID49. It is wonderful!
If you have any more questions, please ask away.
cool.. W810 folks, lets test out 21.6 cid49 a bit more.. if it works great, then no need for the 4.5 based drivers and we can just stick to Kriomag's cid49 ones.
--
Posted: 2007-04-12 02:16:51
Edit :
Quote
On 2007-04-12 01:57:00, sarmadgilani wrote:
On 2007-04-11 22:18:35, GsS 7tr wrote:
@sarmadgilani
does Sarmad 4.8 or 5.01 supports WB Profiles with EM?
Both 4.8 and 5.01 have SPOT and WB profiles with EM.
On 2007-04-12 00:28:33, AllanJacques wrote:
@ All specially Kriomag and sarmadgilani
where is the option of smoother preview?
i really would really like to remove it form other drivers, since it gives me blurry pics.
thanks for your atention!!!
Towards the beginning of the driver, you'll see lines like cam_vf_sync , etc.. just use these values to replace whats in there toget default settings back:
cam_data_offset=2;
cam_vf_sync=7;
cam_ss_sync=f;
cam_ss_sync_9=7;
cam_ss_retries=9;
[ This Message was edited by: sarmadgilani on 2007-04-12 00:59 ]
Thank you!
--
Posted: 2007-04-12 03:00:10
Edit :
Quote
I'm still getting blurry shots with Kriomag's drivers.. the way I feel is, phones that can work great with 7.7 based drivers are amazing.. some of us just have to stick with 4.5 but we can still get good shots that way.
--
Posted: 2007-04-12 03:03:34
Edit :
Quote
On 2007-04-12 03:03:34, sarmadgilani wrote:
I'm still getting blurry shots with Kriomag's drivers.. the way I feel is, phones that can work great with 7.7 based drivers are amazing.. some of us just have to stick with 4.5 but we can still get good shots that way.
I agree with you, but, have you tested 7.7fedited? before yours, was one of the best drivers i tested...
--
Posted: 2007-04-12 03:05:21
Edit :
Quote
On 2007-04-12 03:05:21, AllanJacques wrote:
I agree with you, but, have you tested 7.7fedited? before yours, was one of the best drivers i tested...
Yep I agree, 7.7fedited was pretty good, but with the EM/ENM mods and stuff, I found 4.5 to give a better picture.
How about the W810 folks compare when our phones were made to see if there's a difference there? Take out the battery and there's a white sticker next to the SIM card that has the IMEI and then in smaller print, you'll see something like:
06W44 .. which is mine, meaning it was made in the 44th week of 2006, so its a recent one.
--
Posted: 2007-04-12 03:20:45
Edit :
Quote
My W810i is 06W40.
--
Posted: 2007-04-12 03:26:10
Edit :
Quote
06W38... older than yours, but still new i think...
by the way, seems that Kriomag's 21.4 without smooth preview gives me amanzing results! pictures will come soon!!!
--
Posted: 2007-04-12 03:32:41
Edit :
Quote
Is this picture sharp & good enough? it's taken from v21.5 with small modification...
Macro ON + Night mode ON.
Daylight.
[ This Message was edited by: stingjoel on 2007-04-12 03:59 ]
--
Posted: 2007-04-12 04:14:24
Edit :
Quote
New Topic
Reply
