News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Raider camera driver for K790, K800 and K810 (v6.6.5) Bookmark topic




as far as I tested, EM and SEM work faster by far.
--
Posted: 2008-10-10 03:50:55
Edit : Quote


Thank you for new camdriver.
SEM and EM is faster.(shorter waiting time for black screen)

[ This Message was edited by: ptkstep on 2008-10-10 03:47 ]
--
Posted: 2008-10-10 04:38:07
Edit : Quote


Raider:
WOWOWOW~~~~great for u'r work!

but i can't not umderstand what's that mean....

shutter speed | fast | slow | fast | slow with flash
---------------------+---------+---------+-----------------+---------+---------+--------------+
0 | auto |
+-------------------+-----------------+-------------------+--------------+
| manual ISO | auto ISO | manual ISO | auto ISO |
+---------+---------+---------+-------+---------+---------+--------------+
1 | SEM - | SEM + | SEM H | SEM | SEM - | SEM + | SEM ISO100 |
2 | EM - | EM + | EM H | EM | SEM - | SEM + | SEM ISO200 |
+---------+---------+---------+-------+---------+---------+--------------+
| - = exposure time - ISO
| balance of picture quality (higher ISO = lower exposure time)
| + = exposure time + ISO
| both parameters used together
| H = hybrid
+------------------------------------------------------------------
--
Posted: 2008-10-10 06:07:29
Edit : Quote


Hi
can some one please tell me about the CWB ,

the White Balance has only two steps ...

please
--
Posted: 2008-10-10 07:19:42
Edit : Quote


Thank Raiderski.

Yes, EM and SEM is faster after the shutter is pressed but the filesize is small. I think the compression is just at 75%. Please tell me whether you got this problem or it just happens on my phone.
--
Posted: 2008-10-10 08:06:57
Edit : Quote




Quite complicated but if you read carefully, you may understand the cases will happen.

@Raiderski: Is it possible for me to set EMH on as default. I can see a better cooperation between ISO and Exposure in this new version. Really like it.

[ This Message was edited by: wickedsick on 2008-10-10 07:27 ]
--
Posted: 2008-10-10 08:19:24
Edit : Quote


@firoz

go to ev function at -1.0
start Custom WB (1) and wait some seconds for colors stabilization
lock WB (2)


[ This Message was edited by: H_rY on 2008-10-10 07:23 ]
--
Posted: 2008-10-10 08:23:02
Edit : Quote


in readme.txt you can find:

new hybrid versions of modes ensure a compromise between ISO and exposure time

if you consider auto mode as 'low' quality (in wide range of low-light conditions) and SEM/EM as 'high' quality then hybrid modes are between them. they will not give you as good quality as SEM/EM but it will be better than in auto mode

SEM/EM: good quality, ISO 100, long exposure time
hybrids: medium quality, ISO 200 - 640, short - medium exposure time



examples: my 4shared account -> dev -> hybrid SEM and EM

firoz
1. prepare white/gray card (paper or anything else)
2. point your camera to card (fill whole screen)
3. set +1 - this will start colors stabilization process (it's quite fast)
4. if colors are stabilized then set +2 to lock white balance
5. take shots

white balance will be locked all the time until you won't unlock it (go back to +0) or restart the camera. CWB is very sensitive, if you want good results you have to be quite careful in steps 2 and 3

here you can find examples of CWB: http://www.esato.com/board/viewtopic.php?topic=170579&start=480

wickedsick
not possible in this version. maybe in next version I will make possibility to override default auto mode by hybrid EM

--
Posted: 2008-10-10 12:13:48
Edit : Quote


Does that mean that SEM/EM are now at the last values of EV+0.7/1.0 ?
--
Posted: 2008-10-10 12:53:40
Edit : Quote


last values?
--
Posted: 2008-10-10 13:07:38
Edit : Quote

---

New Topic   Reply

Forum Index