Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
So krio? Can you mod the LED as i asked? It would be soo cool!
--
Posted: 2007-04-16 16:36:00
Edit :
Quote
On 2007-04-16 16:08:16, 679 wrote:
Seems your driver hasn't problem with focusing for MACRO=ON and distance 1-2m (like Krio 21.5). But sometimes for close distance focus is "missed". I think it is bcs of Fast Focus. Can you point the lines in driver to change it for Normal Focus?
[ This Message was edited by: 679 on 2007-04-16 15:17 ]
do you want the driver without manual focus?
--
Posted: 2007-04-16 17:06:40
Edit :
Quote
On 2007-04-16 14:10:20, hellvy wrote:
Well, may be it's too many request.. but Kopritis, can you make your 5.35 driver without CC and EM (but still ENM) ?
5.53 v1 without CC and EN
1. Fast Focus
2. Very sharp images at day and night with ENM
3. 87% compression at fine mod and 75% compression at normal mod
4. 15fps video recording at day light an normal conditions and ~8fps with nightmod on
5. ENHANCE NIGHT MODE when you "turn ON the Nightmode and Macro ON"
6. Manual Focus (Macro ON: 1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0 with Zoom preview)
7. Advanced Zoom
dowload:
http://www.rogepost.com/n/3877907205
--
Posted: 2007-04-16 17:10:51
Edit :
Quote
On 2007-04-16 16:36:00, norbi_nw wrote:
So krio? Can you mod the LED as i asked? It would be soo cool!
i know it would be cool but its impossible to enable led from driver level
i've tried that but it just wont work... (maybe chengrong will find the way? :/)
--
Posted: 2007-04-16 17:30:01
Edit :
Quote
On 2007-04-16 17:06:40, kopritis wrote:
On 2007-04-16 16:08:16, 679 wrote:
Seems your driver hasn't problem with focusing for MACRO=ON and distance 1-2m (like Krio 21.5). But sometimes for close distance focus is "missed". I think it is bcs of Fast Focus. Can you point the lines in driver to change it for Normal Focus?
[ This Message was edited by: 679 on 2007-04-16 15:17 ]
do you want the driver without manual focus?
Realy - no. But I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...
[ This Message was edited by: 679 on 2007-04-16 16:46 ]
--
Posted: 2007-04-16 17:45:29
Edit :
Quote
macro manual focus with kopritis last driver
manual focus to infinit with the same driver
--
Posted: 2007-04-16 17:51:03
Edit :
Quote
On 2007-04-16 17:45:29, 679 wrote:
Realy - no. But I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...
[ This Message was edited by: 679 on 2007-04-16 16:46 ]
the driver have normal autofocus in zoom 1.0 but the problem of you is not the fast autofocus, it's the next lines...
open the camdriver0.dat with a notepad ang go to find this:
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END
05 02 00 08 3C #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
-------------------------------------------------------------------------
and replaced with this:
seq_set_prop_7_0=06 02 00 01 28 03 #CMD_END
05 02 00 08 3C #CMD_END
06 02 00 01 81 34 #CMD_END
#WAIT_FOR_MODE_TRANSITION;
--
Posted: 2007-04-16 17:57:55
Edit :
Quote
On 2007-04-16 17:45:29, 679 wrote:
I want in MACRO=ON and ZOOM=1.0 (Autofocus) to have not "fast focus" but normal focus - as i remember there is such options in focus features set...
it wont make difference... autofocus with manual focus mode (1.0) have problem with focusing, no metter what focus mode is selected (except only macro) im trying to fix this (in 21.7 its better i think but not as good as without manuan focus enabled)...
EDIT:
damn, i think i've made it
autofocus is working likie a dream
(in 1.0 with manual focus mode). i just tested it with same test where 21.5 and 21.6 failed too many times, and now it focus every time for 10 tries
)
NOPE
it still work not as good as normal autofocus... damn it!
but it works good when only macro range scanning is set :/ i will leave it that way (only macro range scanning when macro is on...)
btw. i've rebuilded entire driver in 21.8
now EM/ENM and Super manual focus are enabled only when Picture quality is set to FINE (with NORMAL picture quality you have normal driver with zoom in all modes) - yes, no longer CC...
[ This Message was edited by: Kriomag on 2007-04-17 09:28 ]
--
Posted: 2007-04-16 18:02:00
Edit :
Quote
hi all
new driver v1.60 paparazy
- noise, max shapness, + fast shot night led
link:
http://rapidshare.com/files/26332632/drivers_paparazy.zip.html
--
Posted: 2007-04-16 18:06:08
Edit :
Quote
thanks Kriomag!
--
Posted: 2007-04-16 18:09:51
Edit :
Quote
New Topic
Reply
