Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-04-17 13:21:03, myavu wrote:
On 2007-04-17 13:18:43, guguly wrote:
another pic sample
sarmad 5.03
normal mode (macro ON)
It looks pretty nice... what about 5.1 testing?
i'm quite satisfied with 5.03 for now and just getting the hang of it. if i find any bugs/problems, maybe i'll try the succeeding updates...
--
Posted: 2007-04-17 13:23:45
Edit :
Quote
i'm quite satisfied with 5.03 for now and just getting the hang of it. if i find any bugs/problems, maybe i'll try the succeeding updates...
What about the Sharpness? Will it matcd 4.8(21.4)?
--
Posted: 2007-04-17 13:31:46
Edit :
Quote
What about the Sharpness? Will it matcd 4.8(21.4)?
i skipped 4.8 so wasn't able to test that. i came from 4.9 lite, then to 5.01 lite before moving on to 5.03. all drivers gave same results thus far. i only made an upgrade to 5.03 to test and, although i just like the basic point and shoot camera type most of the time, maybe use its other great features, (EM, CC, etc.). so far, so good...
--
Posted: 2007-04-17 13:45:45
Edit :
Quote
Krio take your time, and don't rush the 21.8
--
Posted: 2007-04-17 13:55:21
Edit :
Quote
21.8? today, the best news . keep waiting
does any body know how to reduce exposure by default(without manual changes)? cos my photos always come out a little bit overexposure.
--
Posted: 2007-04-17 14:32:34
Edit :
Quote
On 2007-04-17 08:58:21, myavu wrote:
Hi Guys...
Did any one tested
Sarmad's 5.1 for W810 - Kriomag 21.7 for CID49 W810 based on 4.5.
Yesterday I tested it on all possible night shots. Quality and sharpness is ok... But after focusing shot making is time consuming... by the time small shake on phone is affecting the quality.
For me Macro On- Auto – Normal (w/o CC) - Night Mode was the best shot...
But with Macro Off - Auto - the picture has huge amount of noise especially without Night Node...
I hope Day light shots would be astonishing just like 21.4 with out CC
To conclude, I had tested all drivers since 21.4 (4.
. To me 21.4 (4.
is still a benchmark. All future drivers should evolve from that platform. 21.4 (4.
resembles a Mini Digital Camera…
Thanks to all…
Regards....
W810i Black R4EA031/R4ED001 4GB Sony MS
[ This Message was edited by: myavu on 2007-04-17 08:21 ]
I got the same result.
i took a pic with macro on(no NM), it took 1/2 sec to expose, that's why the pic looks noiseless.
i think the marco mode has some NM function with it.
this maybe a good idea.Macro with some NM functions(exposure time& ISO) and no preview delay(no NM's preview function). the quality beat the NM I think.
[ This Message was edited by: betalin on 2007-04-17 13:48 ]
[ This Message was edited by: betalin on 2007-04-17 13:51 ]
--
Posted: 2007-04-17 14:41:42
Edit :
Quote
On 2007-04-17 14:32:34, betalin wrote:
21.8? today, the best news . keep waiting
maybe today.. maybe tomorrow
i want to be sure its stable before release...
does any body know how to reduce exposure by default(without manual changes)? cos my photos always come out a little bit overexposure.
seq_set_prop_0=$s0 %0 $-0
09 06 02 00 01 $w0 06 #CMD_END;
highlighted number is for changing default EV value
enter lower number to reduce exposure, higher number (in HEX! 0a, 0b etc..) to increase exposure
peace!
[ This Message was edited by: Kriomag on 2007-04-17 15:21 ]
--
Posted: 2007-04-17 16:20:24
Edit :
Quote
On 2007-04-17 16:20:24, Kriomag wrote:
On 2007-04-17 14:32:34, betalin wrote:
21.8? today, the best news . keep waiting
maybe today.. maybe tomorrow
i want to be sure its stable before release...
does any body know how to reduce exposure by default(without manual changes)? cos my photos always come out a little bit overexposure.
seq_set_prop_0=$s0 %0 $-0
09 06 02 00 01 $w0 06 #CMD_END;
highlighted number is for changing default EV value
enter lower number to reduce exposure, higher number (in HEX! 0a, 0b etc..) to increase exposure
peace!
[ This Message was edited by: Kriomag on 2007-04-17 15:21 ]
Thanks very much man, i'll try it immediately.
--
Posted: 2007-04-17 16:24:25
Edit :
Quote
On 2007-04-17 16:24:25, betalin wrote:
On 2007-04-17 16:20:24, Kriomag wrote:
On 2007-04-17 14:32:34, betalin wrote:
21.8? today, the best news . keep waiting
maybe today.. maybe tomorrow
i want to be sure its stable before release...
does any body know how to reduce exposure by default(without manual changes)? cos my photos always come out a little bit overexposure.
seq_set_prop_0=$s0 %0 $-0
09 06 02 00 01 $w0 06 #CMD_END;
highlighted number is for changing default EV value
enter lower number to reduce exposure, higher number (in HEX! 0a, 0b etc..) to increase exposure
peace!
[ This Message was edited by: Kriomag on 2007-04-17 15:21 ]
Thanks very much man, i'll try it immediately.
I have a little problem with this.The value adjust the normal mode and EM EV not only EM.
--
Posted: 2007-04-17 17:24:45
Edit :
Quote
Quote:
On 2007-04-17 13:23:45, guguly wrote:
On 2007-04-17 13:21:03, myavu wrote:
On 2007-04-17 13:18:43, guguly wrote:
another pic sample
sarmad 5.03
normal mode (macro ON)
It looks pretty nice... what about 5.1 testing?
i'm quite satisfied with 5.03 for now and just getting the hang of it. if i find any bugs/problems, maybe i'll try the succeeding updates...
im using 5.03 myself, i find it to be better than 5.1 especially for sharpness
--
Posted: 2007-04-17 20:04:00
Edit :
Quote
New Topic
Reply
