Esato Mobile
Sony Ericsson / Sony : Technical : Convert a data/service to a service/data cable
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Technical > Convert a data/service to a service/data cable Bookmark topic
Page <  123

dreamzboy Posts: 1

hi, is there any way to convert a cable to act like a syncstation? cause there's this online update service on the se website for the k700i, and i don't want to buy a syncstation cause it's too expensive.
--
Posted: 2005-04-10 09:00:16
Edit : Quote

magatru Posts: 11

@ivc,

If I use the T28 data cable, what kind of communication / software can use to communicate between T28( others se phone?) with PC?

thanks in advance,
--
Posted: 2005-05-26 10:40:06
Edit : Quote

Hoofy Posts: 1

Hi all .

I too have a vodafone k700i phone and yes i want to rid the vodafone firmware. Do i Flash it or unblock it ?? ( not really clues up on phones )

And also i have a T68 cable and have followed "thesluggers" tips to no avail . My cable is USB and not Serial .And also there are more than 3 wires used :S

Pins 2,3,4,5 and 9 are used .. There is a small pcb between pc and phone connector ( if that helps )Can you help me please on how to transfer this from a data cable to a service one... .Thanks
--
Posted: 2005-08-01 20:46:42
Edit : Quote

Snider Posts: 3

Modding the cable was not a problem. But I am having a very hard time with driver installation. The computer always detects it as a DCU-11 cable, not a Prolific USB to Serial. No matter if I uninstall it, remove it during Safe Mode, hidden items on device manager, nothing.

Tried diff versions of the prolific driver. No good.

Anyone get any clue? Please help.


[ This Message was edited by: Snider on 2005-08-20 00:28 ]
--
Posted: 2005-08-20 01:25:21
Edit : Quote

zaka Posts: 1

hello theslugger,

im wondering what software you are using for unlocking and also wondering if your cable has 4 wires or 3 wires. the t28 i have has no wires soldered on pin 9 so i just jumpered it with 11 which there is nothing on 11 as well.

Thanks
--
Posted: 2005-08-23 00:41:38
Edit : Quote

slimmerz Posts: 1

Is this method applicable to the DCU-11 USB cable too? e.g. swaping pins on the phone end, convert into a USB flashing cable
--
Posted: 2005-09-15 07:39:19
Edit : Quote

emanuelj Posts: > 500

don't think so.

[ This Message was edited by: emanuelj on 2005-09-15 12:28 ]
--
Posted: 2005-09-15 13:28:42
Edit : Quote
Page <  123

New Topic   Reply
Forum Index

Esato home