Esato Mobile
Sony Ericsson / Sony : General : Signal Bars
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > General > Signal Bars Bookmark topic
Page <  12345>

govigov Posts: > 500

i thot it had something to do with the algorith with which signal is indicated. This message was posted from a K500
--
Posted: 2005-01-20 17:30:17
Edit : Quote

BobaFett Posts: > 500

topography means the nature around u ( fields, hills etc ) i am currantly between hills with high of 1000 m in average, so the reception isnt the best. the best solution therefoe are sat fones, cos u rec and send calls through the satelites, so any kind of area has got the same kind of coverage ( /// r290 )
--
Posted: 2005-01-20 17:33:17
Edit : Quote

OluYom Posts: > 500

Still on topography, my previous residence sits in a depression, making it a blackhole for all 4 available networks. Some networks had better coverage than others of course, but finding and holding on to a signal was a herculean task for most phones at that place. Walk a few metres away from the house & you could pick a strong signal. This message was posted from a P800
--
Posted: 2005-01-20 18:07:57
Edit : Quote

mince-inside Posts: 452

I was going to post they're a great place to pull!...

...until I read the posts - it's tough being dyslexic

--
Posted: 2005-01-20 18:08:40
Edit : Quote

HyperiaBlue Posts: 424

@ Gill:

Go here for coverage maps for networks around the globe:

http://www.gsmworld.com/roaming/gsminfo/index.shtml

and here for specifically UK:

http://www.gsmworld.com/roaming/gsminfo/cou_gb.shtml

@ the rest of the guys:

A little explaination on how the mobile phone works in terms of signal strength:

Your phone is constantly taking measurements of the signal strengths from the base stations in your surrounding area. It logs onto the base station with the strongest signal and stays there until its either booted off (due to congestion) or you move out of range of the base station.
So what you see on your mobiles screen is a constant changing of signal strength on the signal bar indicator.
If the signal is weak, the signal is boosted internally by the phone to a small degree (AGC - automatic gain control) but nothing really significant.

Bobafett is also correct, depending on the topology of your area, the coverage provided by the base station is dependant on the location of the nearest base station (you could just be on the edge oof the coverage cell) and you surroundings.
Base stations need line of sight to operate, so if you live in a valley this could become a problem if the network has not catered for coverage in the valley itself but rather put up base stations on the hill tops.

If you are encountering coverage problems report them to the network, they may come out and visit you and maybe even give you an antenna.

Sorry for the long post, hope this helps though
--
Posted: 2005-01-20 18:44:17
Edit : Quote

BobaFett Posts: > 500

@hyperia congrat for the post and thx for that link! great infos!
--
Posted: 2005-01-20 18:57:52
Edit : Quote

HyperiaBlue Posts: 424

Always a pleasure to help!


--
Posted: 2005-01-20 19:02:03
Edit : Quote

govigov Posts: > 500

Really good info. Nice to get them all together instead in parts. :-D This message was posted from a K500
--
Posted: 2005-01-20 19:09:45
Edit : Quote

Gill Posts: 142

HyperiaBlue - thanks for the information - it will be very useful.

This forum has provided me with loads of help - much appreciated and thanks to all!
--
Posted: 2005-01-20 19:27:27
Edit : Quote

HyperiaBlue Posts: 424

Hey thats what i am here for...to learn and spread the knowledge!

--
Posted: 2005-01-20 20:01:07
Edit : Quote
Page <  12345>

New Topic   Reply
Forum Index

Esato home