Sony Ericsson / Sony : Software, Firmware and Drivers : C510 CamDriver [M] Manual Mode v2.37
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C510 CamDriver [M] Manual Mode v2.37
Bookmark topic
the pictures gets to bright when it gets nearer it becomes white wash..how can we solve this?
--
Posted: 2009-12-31 06:40:32
Edit :
Quote
On 2009-12-31 05:17:30, gyrolink wrote:
the flash is too strong sometimes it wash out the pic when you shot a very near object..sorry for poor english..pls anyone what can you say about that?
low the EV, and tunn fast shutter speed.
--
Posted: 2009-12-31 08:25:14
Edit :
Quote
@sec5100 how will i do it? im new here pls. help me..im a little bit confused..
--
Posted: 2009-12-31 10:14:11
Edit :
Quote
I've updated my phone to R!HA035 and noticed that the photos donlt get too bright when taking close up photos. This is with the stock camdriver.
--
Posted: 2009-12-31 18:33:00
Edit :
Quote
@tranced im currently in that firmware with the latest camdriver. when i have the stock driver its not too bright but in low light scenes it becomes pixelated and with grains, looks greenish..when i used the shutter speed it becomes dark and small amount of light enters, and it doesnt flash.. like when i picture myself it gets very bright it washed out my face..how can we solve this? i tried lowering the brightness, but my problem is the shutter speed it seems not working..
[ This Message was edited by: gyrolink on 2010-01-01 01:52 ]
--
Posted: 2010-01-01 02:49:51
Edit :
Quote
You can add ISO mode in option setting etc ??
--
Posted: 2010-01-01 19:39:34
Edit :
Quote
@gyrolink: I just set the AF Light to off and the flash turn on in dark environments.
Some samples with the R1HA035 camdriver with flash on:
EV -2.00:
EV 0.00:
--
Posted: 2010-01-01 23:41:01
Edit :
Quote
@what EV should i low? the (off) option? i tried to lower the EV of that but i get a dark picture because it didnt flash..my flash is in auto and my AF is off.
--
Posted: 2010-01-02 02:45:31
Edit :
Quote
Remember that you can force your flash. Read the guide in the first post.
--
Posted: 2010-01-02 04:12:53
Edit :
Quote
*Add FORCED FLASH, If you set White Blance to AUTO, The flash are AUTO, set the White Blance to other... then will FORCED FLASH.
Put camera on just around lighted area with white balance set EV +0 to +20 doesnot produce forced flash. Forced flash only work in dim areas.
Edit : Can Flash with Auto, Off option can be modded to Auto, On, Off option.
[ This Message was edited by: omdhar on 2010-01-02 14:11 ]
--
Posted: 2010-01-02 15:09:23
Edit :
Quote
New Topic
Reply
