Sony Ericsson / Sony : Software, Firmware and Drivers : Number1 2.8 final k790/k800/k810 camdriver
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Number1 2.8 final k790/k800/k810 camdriver
Bookmark topic
On 2007-10-20 15:45:45, mario06 wrote:
On 2007-10-20 15:11:33, number1 wrote:
so every1's saying 2.86 is fine and 2.88 overexposes r u sure about that cause i havn't changed anything 2 do with exposure.
yes i'm sure, i'm using the first posted 2.86 special camdrivers and after much testing i must state that the 2.87 and 2.88 are overexposed, if you'd please fix the torch on the 2.86s i would appreciate it if not it don't matter because i consider you a very talented person and whatever you do deserves respect.
PS. on macro shots the center is also a bit outa focus on the 2.87 & 88s.
Regards
[ This Message was edited by: mario06 on 2007-10-20 14:53 ]
And also, fix the exif data. Eventhough it's nothing.
Cheers,mate.
--
Posted: 2007-10-20 16:05:34
Edit :
Quote
1. pic with number1 2.88, landscape, stabilizer, wb daylight, ev +0.7
2. pic with number1 2.86, landscape, stabilizer, wb daylight, ev +0.7
1. pic with number1 2.88, landscape, stabilizer, wb daylight, ev +0.0
2. pic with number1 2.86, landscape, stabilizer, wb daylight, ev +0.0
--
Posted: 2007-10-20 17:28:48
Edit :
Quote
On 2007-10-20 17:28:48, milan91 wrote:
1. pic with number1 2.88, landscape, stabilizer, wb daylight, ev +0.7
2. pic with number1 2.86, landscape, stabilizer, wb daylight, ev +0.7
1. pic with number1 2.88, landscape, stabilizer, wb daylight, ev +0.0
2. pic with number1 2.86, landscape, stabilizer, wb daylight, ev +0.0
@milan91
the third pic was ok the daylight WB was applied as seen on it's yellowish color but on the fourth pic i noticed there was something wrong, im sure in the fourth pic u also use the daylight WB but it wasn't applied even though u use diff. version of cam drive it should also show the yellowish color like in all versions of cam drive regardless of who modded it the incandescent WB gives off bluish color...
what im trying to say that it was the bug that im talking about before on camdrive 2.86.. even though u changed the WB the WB you selected was not properly applied... it just gives off an automatic WB...
so the comparison of pic 3 and 4 is not good..
--
Posted: 2007-10-20 18:02:13
Edit :
Quote
I dont know

I have problem before with 2.86, when i set daylight nothing happen, but when i set again daylight then its good.But today i forget on that bug.
--
Posted: 2007-10-20 18:23:58
Edit :
Quote
On 2007-10-20 18:23:58, milan91 wrote:
I dont know

I have problem before with 2.86, when i set daylight nothing happen, but when i set again daylight then its good.But today i forget on that bug.
2.86 is perfect but with that it cannot assure to take good photos at anytime...
2.87 and 2.88 have also that bug but not as often as the 2.86.... maybe it has something to do with the delay or the update.. something like that....
hope number1 is working on that issue..
--
Posted: 2007-10-20 18:30:42
Edit :
Quote
On 2007-10-20 18:30:42, whitehackker wrote:
On 2007-10-20 18:23:58, milan91 wrote:
I dont know

I have problem before with 2.86, when i set daylight nothing happen, but when i set again daylight then its good.But today i forget on that bug.
2.86 is perfect but with that it cannot assure to take good photos at anytime...
2.87 and 2.88 have also that bug but not as often as the 2.86.... maybe it has something to do with the delay or the update.. something like that....
hope number1 is working on that issue..
i made a 2.89 i re- done the whitebalance and so far it's seem to fix the problem
--
Posted: 2007-10-20 18:35:04
Edit :
Quote
i knew it you're working on that... you really made best camdrive....
keep up the good work and goodluck to your latest camdrive..
can't wait to test 2.89...
--
Posted: 2007-10-20 18:41:29
Edit :
Quote
how about the exif?
--
Posted: 2007-10-20 18:47:13
Edit :
Quote
v2.89! bring it on!
--
Posted: 2007-10-20 18:57:55
Edit :
Quote
2.89
change log:
redone the whitebalance with more advance updating method,
added portrait scene with more sharpnass and lower flash iso
remove TO_DRAFT cause it does nothing,
change iso property in property 24,
fixed Effects, property 8
download
http://www.4shared.com/dir/4268330/c6059f4e/289.html
--
Posted: 2007-10-20 19:07:14
Edit :
Quote
New Topic
Reply