Sony Ericsson / Sony : Software, Firmware and Drivers : Modded Camera Driver for k800i/k810i
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Modded Camera Driver for k800i/k810i
Bookmark topic
k
--
Posted: 2007-08-30 07:16:30
Edit :
Quote
plz upload mongoose3800's driver. I have a k810i, and i like the k800i camdriver better. Does mongoose's camdriver support VR @ 30FPS?
And if possible, upload some sample pictures (make this topic like supermod for K750/w800/w810 thread)
[ This Message was edited by: norbi_nw on 2007-08-30 10:56 ]
--
Posted: 2007-08-30 11:54:45
Edit :
Quote
tested kopritis 2.8 vs 2.5 stock driver. 2.8 was much sharper. Now need to correct the white ballance... and enhance the VR from 10FPS to 30FPS. After that, we can concentrate on colors.
--
Posted: 2007-08-30 14:41:14
Edit :
Quote
On 2007-08-30 06:57:21, juming wrote:
On 2007-08-30 05:36:08, max_wedge wrote:
nice work. Now I'm off to compile all that in a driver...
2MP changes, plus sharpening 0, 100% compression, flash to 350.
Max, forget about 100% since I already try it reset (not saving) so I back to 95% only.
What max file size do you have for 2mp? What buffer size have you set for 2mp. If you go above 900kb it will crash. I've been running 900kb with 2mp for 2 days now without a single reset and I have taken lots of shots. I've been playing around with compression ranging from 90% to 100% and have not had one single problem.
--
Posted: 2007-08-30 14:56:32
Edit :
Quote
OK - so I've got the 2.8 camera driver, and got XS++ up and running and connected to my K810i.
In XS++ what configuration do I use?
'Flash' or 'FSX'?
If 'Flash' then do I 'Flash Main Firmware' or 'Flash File System'?
Thanks in advance
--
Posted: 2007-08-30 15:00:05
Edit :
Quote
read my Menu Modding Guide, it starts woith an explanation how to copy files to the phone with XS++.
--
Posted: 2007-08-30 15:18:40
Edit :
Quote
You must be using a different version of XS++ to me.
My K810i phone is not listed on there and the BreakXS box is in a different place.
Every time I try it I get a failed message.
Can anyone help?
--
Posted: 2007-08-30 15:48:57
Edit :
Quote
Vinny ur probably not following the instructions accurately. just try doing it step by step and ull get it, Max's guide is really helpful, there's also another guide, with pictures for XS++ on the forum somewhere.
http://www.esato.com/board/viewtopic.php?topic=153990
--
Posted: 2007-08-30 15:53:52
Edit :
Quote
Would it be down to the fact that the K810i is not listed in XS++?
I have tried it step by step more than ten times now and it's just not working!
Never mind - I had XS++ v1.5. Downloaded v1.6.8 and it worked first time
[ This Message was edited by: Vinny67 on 2007-08-30 15:02 ]
[ This Message was edited by: Vinny67 on 2007-08-30 15:38 ]
--
Posted: 2007-08-30 16:01:24
Edit :
Quote
how to update my VR from 10 to 30? what line should i change?
--
Posted: 2007-08-30 16:05:15
Edit :
Quote
New Topic
Reply
