Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-04-21 15:47:40, guguly wrote:
@janek
i applied the edit you made to the driver and works great. faster EM!! thanks!!
Sample shots again, 5.03:
[ This Message was edited by: guguly on 2007-04-21 16:16 ]
Hi @guguly,
Could you please post your this modified driver? Sarmad 5.03 seems works the best for my w810. His 4.81 gives a bit yellowish pictures in dark and a bit pinkish in daylight.
Which driver is the best for you? Do you think it's possible to combine Samrad5.03 and Korpitis 6.0 on Fine and Normal Pic Qualities in one driver??
Thanx!
--
Posted: 2007-04-27 19:16:47
Edit :
Quote
Have you tried turning off/on the Color correction? there shouldnt be any difference in colors between 5.03 and 4.81.. if you could please post pictures comparing shots between 5.03 and 4.81 that would be great, since I could then see exactly whats going on and make changes if need be.
--
Posted: 2007-04-27 19:22:21
Edit :
Quote
ain't k750i camdriver better than w810i's?
Hey sarmad, currently i'm using your driver, works good for me, but i have 2 problems..
1. can you do something about zoom? it's kinda blocky, and not smooth enough (the 4x picture zoom)
2. Plz make the camera display faster (increase refresh rate)
and we get a very fine driver
Also tell me how sharp is this enhanced sharp driver? 5 or 6?
[ This Message was edited by: norbi_nw on 2007-04-27 20:38 ]
--
Posted: 2007-04-27 21:30:42
Edit :
Quote
i am tryin to use the super mode but not able to... can anyone give me the details of wat it can do and some basic instruction on how to use those function he posted.... thanks...
--
Posted: 2007-04-27 21:42:21
Edit :
Quote
On 2007-04-27 21:30:42, norbi_nw wrote:
ain't k750i camdriver better than w810i's?
Hey sarmad, currently i'm using your driver, works good for me, but i have 2 problems..
1. can you do something about zoom? it's kinda blocky, and not smooth enough (the 4x picture zoom)
2. Plz make the camera display faster (increase refresh rate)
and we get a very fine driver
Also tell me how sharp is this enhanced sharp driver? 5 or 6?
[ This Message was edited by: norbi_nw on 2007-04-27 20:38 ]
Ok, here's 4.81 with the smoother viewfinder preview.. but the reason I left it out is because atleast in my tests, having this in led to slightly blurrier pictures (I dont know why)..
http://www.mediafire.com/?emwdyimtn4n ..
Sharpness is set at 6 in 4.81 and works very well.. if you get blurry results, then just replace every "06 56" with "05 56" and it'll be great. but try it like it is first.
4x zoom is always going to be a little choppy but its not bad.. the problem with 16x zoom is that its slow.. as in, the response to the zooming is delayed.. with the 4x zoom when you stop zooming, it stops.. when you stop zooming in 16x zoom, the zooming actually continues for another second, this is very annoying.. 16x zoom is there in video recording so that videos can be fluid and smooth.
to be honest theres no reason to use digital zoom when youre taking pictures.. you can always do it from the phone after youve taken the shot, or enlarge the picture on your computer.
[ This Message was edited by: sarmadgilani on 2007-04-27 21:18 ]
--
Posted: 2007-04-27 22:17:01
Edit :
Quote
@mariusee
Yeap! the automatic jpeg compression gives blured pictures... i see that after a lot of test shots!
i'm working a new mod... but you have to wait a little bit!!!
--
Posted: 2007-04-27 22:52:36
Edit :
Quote
On 2007-04-27 19:22:21, sarmadgilani wrote:
Have you tried turning off/on the Color correction? there shouldnt be any difference in colors between 5.03 and 4.81.. if you could please post pictures comparing shots between 5.03 and 4.81 that would be great, since I could then see exactly whats going on and make changes if need be.
Hi Sarmadgilani,
Thank you for answering!
I did fast comparison that time of 5.03 and 4.81(with spot). Both were set to Normal quality and there was certain color difference. In night pictures I noticed that turning Incandescent in 4.81 compensates yellowish colors but it doesn't go automaticly. I will look for pictures I made or make new and post them soon.
What do you think of combining your driver wit Korpitis? Like for example your driver on Fine and his on Normal quality?
@ Korpitis
What do you think about combining your Mod with Sarmad's? Would be a great driver for all cases

[ This Message was edited by: volgovt on 2007-04-27 22:22 ]
--
Posted: 2007-04-27 23:18:18
Edit :
Quote
Can someone point me in the direction of how to actually get the 4.81_smooth_camdriver0 or the like onto my phone and where do i put it?
--
Posted: 2007-04-28 00:31:22
Edit :
Quote
Sweet 4.81 enm + Normal mode
--
Posted: 2007-04-28 00:46:15
Edit :
Quote
I also recommended toning the blue down for the LED in the next release of the Kriomag series, ie. 21.9. The pictures start to look like Nokia N73's artificial colouring which is ugly.
--
Posted: 2007-04-28 00:52:18
Edit :
Quote
New Topic
Reply