>
New Topic
>
Topic Locked
Esato Forum Index
>
Sony Ericsson / Sony >
Symbian phones
> P990i R6D23 firmware available on SEUS
Bookmark topic
Help!!
How many minutes does it take to press C while updating??
If i'm correct I did take off the battery off and inserted it back again, turn it on while turning it on I press C and insert the usb. Since then a blue color appears waited a couple of minutes and nothing happened. Tired of waiting for it I took it out on the USB cable, started the whole thing again and seems nothing happens the same thing occurs. I tried swiching it on the phone works like it do. I'm afraid that it might be dead or something while Im doing the unplugging the USB. For what instance does the phone ending up dead?
[ This Message was edited by: baboy on 2007-06-20 16:04 ]
--
Posted: 2007-06-20 16:59:35
Edit :
Quote
You only need to hold down the "C" button for a few seconds, until the update service detects the phone - it will then move to the next screen and you can let go of the button.
--
Posted: 2007-06-20 18:25:43
Edit :
Quote
The SEUS I used instructed me to release the "C" button after it detected the hardware. And when it detected the hardware a Windows XP bubble popped out saying "unrecognized device detected has malfunctioned". Then the download begins and when it finished, the same bubble prompt popped out again before the software was uploaded to the phone (this is unusual as I usually get the bubble just once before the download). True enough, it was a start to an unsuccessful update where it stopped uploading at 98%(so close damnit) and a SEUS prompt pops out saying it couldn't connect to the server of some sort before shutting down. I restarted SEUS and the bubble prompt popped just once after the hardware detection, and this time SEUS got me through as it always has. I hope I don't have to reflash because of this, because I've never had such an incident happen before. Has this ever happened to any of you guys, and if yes, are your phones behaving?
[ This Message was edited by: mode on 2007-06-20 17:51 ]
--
Posted: 2007-06-20 18:49:38
Edit :
Quote
Yes, it's happened to me before. Windows sometimes re-detects hardware that's already been installed - it happened when I went to flash R6 actually. Despite an identical error message though, the flash went through fine first time to 100% with no problems.
--
Posted: 2007-06-20 19:24:00
Edit :
Quote
On 2007-06-20 15:35:52, makbil wrote:
Try to open the new PCSuite with winrar and extract the files to a folder on your disk. Then run the installation from there. It works that way.
Thanks, will try.....why is this, do you know? never had a problem before....
--
Posted: 2007-06-20 19:54:08
Edit :
Quote
On 2007-06-20 06:29:48, GPRS wrote:
@corrado - go to >tools > control panel> connections>mobile networks> tap mobile networks > GSM/3G networks > choose GSM only and you are done
Thank you!
--
Posted: 2007-06-20 20:43:15
Edit :
Quote
On 2007-06-20 16:57:26, Bevanj wrote:
On 2007-06-20 08:50:17, sand2347 wrote:
I am also having a problem with the blackberry connect 3.5 working on the R9G007. I install the blackberry connect, and when i register, it says "not connected". Then sometimes, it automatically shows that i am connected to teh blackberry service, but i havent got a registration confirmation message. Also, when the phone automatically shows the blackberry connect service to be on, i have tried to send service books, but the service books are not received on the phone. Can anyone help??
Sandeep
On 2007-06-19 08:44:40, vatanasiu wrote:
On 2007-06-18 22:29:46, mrecker wrote:
Hi,
does the 3.5 Blackberry Connect Software works on the new firmware ?
Thanks in advance
Marc
Yes, works ok!
I am also experiencing this problem. The blackberry connection becomes active for a second and then shuts down. In the blackberry setup menu APN active comes up for a while, but it never connects. This is really irritating me as blackberry email was one of the things I used alot before I updated my firmware and it stopped working. If anyone could help get this sorted it would be greatly appreciated. I have just dropped sony ericsson an email about this issue, and will post the reply as soon as I recieve it.
Bevan
Me too, such a shame BBC never connects to the network whereas it used to work perfectly with last FW...
--
Posted: 2007-06-20 22:24:38
Edit :
Quote
Just want to say that with the latest FW R6, the phone is really reliable.
There is an email bug reported before. Shame. Yes, although I don't seem to reach the size of mail which would cause any problems.
Besides that - the phone performs really great. Yes, many things should be improved. But it's very useful and serves great in my work. Actually this, and previous FW never made any problems with performance. Adding DocsToGo and Opera Mini 4 - very useful tool.
So I'll wait for the successor based on Symbian 9.5.
--
Posted: 2007-06-21 01:47:41
Edit :
Quote
On 2007-06-20 10:49:09, makbil wrote:
OK. That trick doesn't work anymore.
I'm suddenly less bothered about not being able to run SEUS on Ubuntu. Opera feels crippled without shortcuts (i.e when I forget to launch it before opening the flip).
[ This Message was edited by: coth on 2007-06-21 01:01 ]
--
Posted: 2007-06-21 01:59:34
Edit :
Quote
On 2007-06-20 19:54:08, satcha wrote:
Thanks, will try.....why is this, do you know? never had a problem before....
Well, since nobody was able to help me with that, I had to play around and cam up with this solution. It is because windows detects the wrong suite in that file... the suite64.exe instead of the suite32.exe. If you manually start the suite32 then it has no choice!
Glad it worked for you too!
--
Posted: 2007-06-21 02:31:04
Edit :
Quote
New Topic
Topic Locked
