Sony Ericsson / Sony : General : k700i De-Branding now possible with T28 service cable )
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> k700i De-Branding now possible with T28 service cable )
Bookmark topic
Not near the computer, but check you have com port setup correctly and that nothing is occupying your com port. Device manager, check conflicts etc. Or try the other com port. Or even your cable is not working. Try to connect to FMA to see if it works.
This message was posted from a K700i
--
Posted: 2004-10-11 16:37:16
Edit :
Quote
There seems to be slightly conflicting information on how to de-customise using the new v1.28 TOTAL Multiserver:
From the instructions in the application it says:
1. Select DEFAULT page.
2. Select DEFAULT LANGUAGE FIRMWARE for your phone
3. Select FIRMWARE for your phone if the phone's firmware version differs from DEFAULT LANGUAGE VERSION
(then after that I guess you press the Flash button)
On
www.TotalServer.net it says:
1. Select the Normal K7S file for example K700_R2AA003_ZONE_1.K7S
2. Press Flash
3. When it says done DO NOT disconnect cable or power on phone
4. Select the Default Language file(K7L) you prefer
5. Press Flash
6. When it says done DO NOT disconnect cable or power on phone
7. Once the steps are completed the phone will be fully working and decustomised
Following the apps instructions, you choose both files together & only Flash once?
Following totalserver.net, you choose each file & flash each file individually?
Which one is correct or doesn't it matter? And does it still only cost 1 credit?
--
Posted: 2004-10-11 16:39:01
Edit :
Quote
After finally getting up and running I have the same error message as Zaphod.
However, I get it just after the second 'Initializing Filesystem...'. I have also lost my credit.
When I turn my phone on I am told i have a 'Configuration error. Please contact your....." blah.
--
Posted: 2004-10-11 16:40:33
Edit :
Quote
Faceoff suggested that our problem was due to using version 1.25 of MultiServer although we have had this working before.
We are now using 1.28.
Faceoff credited me back with 2 credits, so we used the first one to remove the unlock code (even though we knew the valid unlock code), incase it was this that was confusing the MultiServer client. Its 86% through flashing now, I'll let you know how it goes.
--
Posted: 2004-10-11 16:58:01
Edit :
Quote
Success this time.
I recommend making sure you have your phone lock turned off before you start flashing.
Cheers.
--
Posted: 2004-10-11 17:05:28
Edit :
Quote
Just checking what you mean by phone lock. Is that when you need to enter a PIN to make calls and generally use the phone? If yes then I have never used that before anywya so it can't be my problem!
Cheers!
--
Posted: 2004-10-11 17:07:59
Edit :
Quote
Quote:
On 2004-10-11 17:07:59, elziko wrote:
Just checking what you mean by phone lock. Is that when you need to enter a PIN to make calls and generally use the phone? If yes then I have never used that before anywya so it can't be my problem!
Cheers!
I think he is meaning about the scrennsaver auto-lock. Turn this off.
--
Posted: 2004-10-11 17:10:47
Edit :
Quote
@ JoolsG4
The instructions on the
www.totalserver.net are for older versions of TS. Use the instructions in the newest version of TS - 1.28.
There is not any more need for standard decustomization and battery off... OK. Again I have to say I didn't try it myself and still waiting from feedback from analog or anyone else...
@ elziko
Phone Lock is in settings menu under locks...
Are u running the latest version of TS 1.28? Is your phone locked?
Take care
Velimir
--
Posted: 2004-10-11 17:17:55
Edit :
Quote
The lock under Settings->Locks->Phone Lock.
I don't know for a fact that this is a problem, and I guess if yours is already off, I suppose it isn't. That is the only discernable difference between my successful upgrade on 1.25 on Friday and my friends failed upgrade on 1.25 today.
--
Posted: 2004-10-11 17:19:18
Edit :
Quote
I have debranded my K700 and all is working fine except when I put my phone on key lock and leave it for a minute then press to unlock, the screen goes plain white for a second or two then goes normal again.
This is really annoying and was wondering if anyone has had this problem and knows how to solve it.
Thanks!
--
Posted: 2004-10-11 17:19:49
Edit :
Quote
New Topic
Reply
