>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Technical
> msi usb bluetooth key (MS-6967)
Bookmark topic
MS is going to make a bluetooth keybaord and mouse, does this IPV6 thing mean that they are going to make them IPV6 capable network devices? I would have thought that it would be more sensible to make them bluetooth serial port devices. Much less software required built into the device.
Any idea how the Widcomm software will intereact with the MS bluetooth stak? Hopefully we will get to keep all the funtionality we already have.
--
Posted: 2002-09-07 23:24:00
Edit :
Quote
Quote:
On 2002-09-07 21:28, funks wrote:
You probably won't want to.. Microsoft BT software won't support normal profiles as you know it.. All BT devices will go through IPV6 and certain profiles will only be supported as legacy devices..
From what i read from MS info
page,
The initial Microsoft software support for Bluetooth technology targets the following scenarios:
-Device discovery and configuration
-Dial-up networking over cell phones and null modems
-Printing
-Wireless input devices such as mice and keyboards
-Personal area networking
The same or probably less functionalities than Widcom's software. Furthermore, i would be glad if MS implemented bluetooth IPv6.
Currently, i tried to link MSI key to the IPv4 without much successes.
I can only achieved File Transfer btw two Msi bluetooth Key using 2 PCs and created BluetoothNullConnection. I am trying to figure how to share broadband internet connections with 2 MSI key(2PC). Kinda Bluetooth WIFI. Any idea how to do it?
[ This Message was edited by: all8 on 2002-09-10 00:53 ]
--
Posted: 2002-09-08 02:37:00
Edit :
Quote
All8,
I have downloaded bluetooth.exe from net but the version still 1.2.1.20, how would i have da new ver. And firmware is still 272 not 373. Pls help, someone pls!
This post was posted from a T68i
--
Posted: 2002-09-08 08:06:00
Edit :
Quote
>santana
Download version 1.2.2.15 from
here
Follow funks's instruction to upgrade to 373
http://esato.com/board/viewtopic.php?mode=viewtopic&topic=8406&forum=18&start=260[ This Message was edited by: all8 on 2002-09-08 07:31 ]
--
Posted: 2002-09-08 08:12:00
Edit :
Quote
All8,
When i paired my HBH-10 with my computer, it gives me this error message 'Error in pairing with device HBH-10. Reason: Device did not respond, please try again.
Please help.
--
Posted: 2002-09-08 09:02:00
Edit :
Quote
Santana- try to on/off ur pc n phn n detach/attach the msi too. Dnt forget to activate ur discoverable
This post was posted from a T68i
--
Posted: 2002-09-08 11:16:00
Edit :
Quote
>Santana,
This is an extract from SE Instruction Manual,
To pair the Headset with another device(Computer)
1. Activate the Bluetooth function in the other device if necessary.
To do this, please refer to the user documentation for the device.
2. With the Headset turned off, press and hold the Headset button for
up to 10 seconds until the indicator light on the Headset flashes
green and red. Make sure the Headset and the phone are not too
far apart.
3. Initiate Bluetooth pairing in the other device to pair it with the
Headset. To do this, please refer to the user documentation for
the device.
4. When asked, enter the Headset passkey and press YES. If pairing
is successful, the Headset indicator light flashes green.
Resetting the Headset
You may want to reset the Headset to its default settings, if, for
example, you forget your Headset passkey. This also clears all
current pairings.
To reset the Headset(Try this if it still doesn't work-Then Pair again)
1. With the Headset turned off, press and hold the Headset button for
up to 10 seconds until the indicator light on the Headset flashes
green and red. Then release the button.
2. Press and hold the button again until the Headset beeps and is
turned off. The Headset has now been reset.
Hope this will help
[ This Message was edited by: all8 on 2002-09-08 15:24 ]
--
Posted: 2002-09-08 13:15:00
Edit :
Quote
Thank you guys, i will try to set it.
--
Posted: 2002-09-08 14:31:00
Edit :
Quote
Guys,
I can see it (HBH-10)under the security option but when i pair it, it takes quit a while the prompts me 'TIMEOUT ERROR..........'. I can see it in the entire bluetooth neighborhood.
But it doesn't work at all, how can i know it is working?
Need assistance urgently.
--
Posted: 2002-09-09 04:56:00
Edit :
Quote
Quote:
On 2002-09-09 04:56, santana wrote:
Guys,
I can see it (HBH-10)under the security option but when i pair it, it takes quit a while the prompts me 'TIMEOUT ERROR..........'. I can see it in the entire bluetooth neighborhood.
As i mentioned before, you need to delete the device in T68/Accessories/HBH/Paired Device/delete device( clean up all)
Redo Pairing,
This time, make sure the paired password for T68/HBH-10 and HBH-10/PC must be the same.
Try this again
--
Posted: 2002-09-09 12:58:00
Edit :
Quote
New Topic
Reply
