>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> FAQ: Fixing a dead K800i
Bookmark topic
On 2007-04-28 18:55:23, kiori wrote:
I WAS TRYING BUT I DONT KNOW HOW TO INSTALL THE DRIVER MANUALLY WITH THE CD PLEASE TELL ME THE STEPS, AND IF DONT INSTALLL THE DRIVER YET, IS POSSIBLE THAT THE PC CAN RECOGNICE THE K800
SORRY FOR MY BAD ENGLISH
Try install SE Update Service. Last time I install it in my sister computer it install the required driver at the end of installation. Then restart and run wotan client again. Use 2 5 key pressed together instead of c on phone.
--
Posted: 2007-04-29 03:36:13
Edit :
Quote
I wonder if anyone can help with this one !
I've tried connecting my K750i via WOTAN and not a problem the phone is recognised and info is displayed relating to the phone. But when attempting to connect my dead K800i the phone is recognised but WOTAN just sits displaying the following :-
Connect your phone by, pressing "C"
waiting...
phone found
DB2020 detected
I've left the phone connected for the past 45min and still no change !
Any assistance would be appreciated ..Thanks
--
Posted: 2007-05-01 12:16:42
Edit :
Quote
plss helpp me outt.. my SEK800i is not working when i started its jst flashing and nothing else is coming plsss i dont know whts wrong wid this fone..
--
Posted: 2007-05-05 21:35:17
Edit :
Quote
hi, thanks been a big help, my k800i wouldn't turn on after i turned it off, ive followed your instructions and after a couple of trys its working. Thanks. Do i need to update the phone using the SEUS?
Thanks again
--
Posted: 2007-05-06 23:09:12
Edit :
Quote
cutexfairy@ Click on page 1 and then follow the instructions and hopefully your phone will be alive
--
Posted: 2007-05-08 14:11:55
Edit :
Quote
Try install SE Update Service. Last time I install it in my sister computer it install the required driver at the end of installation. Then restart and run wotan client again. Use 2 5 key pressed together instead of c on phone.
YO MEN! IM TRYING BUT NOTHING THE PHONE WAS NOT DETECTED YET BY THE PC I DONT KNOW WHAT I NEED TO DO I INSTAL THE SE UPDATE SERVICE AND NOTHING , MECHANIC PLEASE HELP. WHAT I NEED TO DO ??? I DISCONECT ALL USB IN PORTS AND NOTHING YET I PRESS 2,5 AND C TOO AND NOTHING. THERE MUST BE SOMETHING I CAN DO PLEASE HELP
--
Posted: 2007-05-23 09:37:49
Edit :
Quote
Guys, i seem to be getting the "invalid account" each time i click start.. Wht happens from here?
--
Posted: 2007-05-27 18:27:28
Edit :
Quote
This has sorted my phone! I had a complete brick with only the red LED blinking when I tried to power the phone up.
Everything went exactly as described and now my phone is back from the dead! Wooooohooooo!
--
Posted: 2007-05-30 23:46:09
Edit :
Quote
Thanks Mechanic my phone went dead after trying SE update all i had was the flashing red light . tried your wotan link cleared the password lgin bit hit start and whehey ITS ALIVE it worked holding 2&5
once again many thanks
--
Posted: 2007-06-12 22:49:58
Edit :
Quote
Hi All,
I have a K610i, that has the same problem...
But in Wotan - It just says....
SEMCSEC Status 3
I used Kulan Kendi to do it,
It says the phone is done, but still flashes with the red LED.
Does this mean my GDFS is knackered?
Thanks,
Turkeytaken
--
Posted: 2007-06-23 10:53:17
Edit :
Quote
New Topic
Reply
