Sony Ericsson / Sony : Software, Firmware and Drivers : Number1 2.8 final k790/k800/k810 camdriver
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Number1 2.8 final k790/k800/k810 camdriver
Bookmark topic
try installing the usb flash driver where setool2 lite is u will see a folder called drivers open then open the usb_flash_driver folder double click
gg-setup.exe it will setup the usb drivers u need then try following my guide again.
Does any1 think the k800i camdriver will benifit from having an extra iso value, the k770 has iso 1500 but the k800i doesn't, and wot does the iso acuallty do.
--
Posted: 2007-10-10 18:20:50
Edit :
Quote
Worked like a charm !
I think you should add a "0. if you never installed it, install the drivers located in $SETOOL\\drivers\\usb_flash_driver"
Thanks ! Testing it right now.
--
Posted: 2007-10-10 19:13:30
Edit :
Quote
i think theres a problem with the driver. Pictures taken from close distance look overexposed, and if you view them in the pictures folder, they look ok. try to take a picture of your keyboard in low light (with flash). can u fix that?
--
Posted: 2007-10-10 22:07:41
Edit :
Quote
There you go,2.81 camdriver,K800 device, auto mode,with macro for the caculator image,and only auto mode for the glass image.
--
Posted: 2007-10-10 23:25:57
Edit :
Quote
Guy, pls use document mode when you are try to take macro picture, document mode = macro mode in k800i
--
Posted: 2007-10-11 05:07:46
Edit :
Quote
On 2007-10-10 18:20:50, number1 wrote:
try installing the usb flash driver where setool2 lite is u will see a folder called drivers open then open the usb_flash_driver folder double click
gg-setup.exe it will setup the usb drivers u need then try following my guide again.
Does any1 think the k800i camdriver will benifit from having an extra iso value, the k770 has iso 1500 but the k800i doesn't, and wot does the iso acuallty do.
I dont think so, since it can cause more noise,
i found that the 2.8 also having the same problem, when flash on (iso400), there is still having many noise. Since the 2.81 also the same, seem nothing change in colour..
--
Posted: 2007-10-11 05:13:03
Edit :
Quote
Sirs, a newbie also.
Just wanna ask what should i do if during or after the installation of the new cam driver or (any other drivers) something goes wrong and the phone is "killed". Is there a way to revive it? my K800i is still covered with warranty.
Thanks in advance.
--
Posted: 2007-10-11 05:29:10
Edit :
Quote
On 2007-10-11 05:07:46, genus wrote:
Guy, pls use document mode when you are try to take macro picture, document mode = macro mode in k800i
even daylight macros?
what is the difference ??
--
Posted: 2007-10-11 07:45:23
Edit :
Quote
yes! even daylight macros. coz thats how you use that feature in K800/810
dont use auto... try playing around with the cam to show off its best asset.
and when comparing, of course use same settings for both drivers.
just try to achieve the best possible shots.... so that we can notice our developments....
--
Posted: 2007-10-11 08:04:41
Edit :
Quote
On 2007-10-11 05:13:03, genus wrote:
On 2007-10-10 18:20:50, number1 wrote:
try installing the usb flash driver where setool2 lite is u will see a folder called drivers open then open the usb_flash_driver folder double click
gg-setup.exe it will setup the usb drivers u need then try following my guide again.
Does any1 think the k800i camdriver will benifit from having an extra iso value, the k770 has iso 1500 but the k800i doesn't, and wot does the iso acuallty do.
I dont think so, since it can cause more noise,
i found that the 2.8 also having the same problem, when flash on (iso400), there is still having many noise. Since the 2.81 also the same, seem nothing change in colour..
when it's quite dark the noise filter gets over powerful even when using flash so use the joystick and increase the exposure to +2.0
--
Posted: 2007-10-11 11:23:37
Edit :
Quote
New Topic
Reply
