Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
>
New Topic
>
Topic Locked
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Hybrid Camera Driver for W800i/K750
Bookmark topic
tested the 5.5b driver, it's a bit blue-ish and dark, will stick with 2.441..
@aksd : hope you didn't skip this one, can you adjust the contrast in 2.441 or maybe the next-gen esato camera driver, as i use 2.441 much on indoor area, and the indoor pic is quite under-exposed, it's a bit annoying that i have to set the exposure higher everytime i'm going to take some pic...thanks
[ This Message was edited by: K` on 2006-10-01 13:27 ]
--
Posted: 2006-10-01 14:17:52
Edit :
Quote
Quote:
On 2006-10-01 14:00:43, gxg wrote:
Try the rusian version.. it roks!
somebody else tested the russian version to see how it is?...also is good quality and sharpenes!?
--
Posted: 2006-10-01 16:33:59
Edit :
Quote
Quote:
On 2006-10-01 11:13:07, Andeo wrote:
From what? R1CA002 software?
I haven't seen such firmware, can you attach this driver?
Here is camdriver0.dat from the R1CA021_EMEA1 firmware.
I compared with it.
http://rapidshare.de/files/35073139/r1ca021.zip.html
I have had no crashing with the 2.441 driver, I doubt your crashing problems are due solely to the 2.441 driver.
--
Posted: 2006-10-01 17:16:10
Edit :
Quote
Yesterday I tested 3.1nc by e_erzan and my phone crashed several times. I didn't have such problems with k750 firmware, but I flashed to w800 and the camera started acting strange. In addition to crashing, it failed to take a picture a few times. And everytime I close the camera lid, I get a message saying "Voice commands not recorded, please record..." or "Say name after the tone".
Do you have any idea why? Maybe some buffer size problems?
Now I'm testing 2.441 and I haven't had problems yet, but I'll test more.
P.S. My post count is 69 lol

[ This Message was edited by: smuko on 2006-10-01 16:56 ]
--
Posted: 2006-10-01 17:53:40
Edit :
Quote
How`s the camdriver testing going guys??
_________________
K750i/R1CA021/512mb msdp/custom menu/original displaydriver/no focus sound/testing 3.1 camdriver.
[ This Message was edited by: heins on 2006-10-01 18:42 ]
--
Posted: 2006-10-01 18:24:38
Edit :
Quote
Quote:
On 2006-10-01 17:53:40, smuko wrote:
Yesterday I tested 3.1nc by e_erzan and my phone crashed several times. I didn't have such problems with k750 firmware, but I flashed to w800 and the camera started acting strange. In addition to crashing, it failed to take a picture a few times. And everytime I close the camera lid, I get a message saying "Voice commands not recorded, please record..." or "Say name after the tone".
Do you have any idea why? Maybe some buffer size problems?
Now I'm testing 2.441 and I haven't had problems yet, but I'll test more.
P.S. My post count is 69 lol
[ This Message was edited by: smuko on 2006-10-01 16:56 ]
For different firmware must be different camera drivers.
First, because in power save mode exist some difference.
Second, in last firmware for K750 was added such macros as GET_SENSOR_VERSION, because in new Clara phones with CID 49 mounted other camera module. While I don't know for what.
It's not only my words, you can read about it here:
www.sonyericsson.com
--
Posted: 2006-10-01 19:40:16
Edit :
Quote
Ñamdriver based on version
5.3 will be right for
R1ÑÀ021/R1DB001 firmware.
Camdriver based on version
4.5 will be right for
R1N035/R1AA008/R1BC002 firmware and some early
I tested it on our forums. All peoples were agree with me, and I started dividing camdrivers for different firmware.
There are no more crashes.
[ This Message was edited by: Andeo on 2006-10-01 19:09 ]
[ This Message was edited by: Andeo on 2006-10-01 19:15 ]
--
Posted: 2006-10-01 20:09:15
Edit :
Quote
Torry
Russian v 5.5b has stronger colour and sharpnes.
see this picture. my old boat.
--
Posted: 2006-10-01 20:24:36
Edit :
Quote
I've been testing the deiferent Hibryd Camdrivers, then tried 5.3 and 4.5 versions and found that the 4.5 original is the best you can use, the hybrid camdrivers need more control in Sharpness and Exposition. The firmware I use is R1BD001 and 4.5 driver works better than the Hybrid, so you must work as hard as possible to reach the perfection!
PD: For me 5.3 original Sks
--
Posted: 2006-10-01 20:39:12
Edit :
Quote
Russian v5.5b
macro 1/2 m distance ,fine mode, daylight
fine mode , daylight
--
Posted: 2006-10-01 21:17:16
Edit :
Quote
New Topic
Topic Locked