Sony Ericsson / Sony : Software, Firmware and Drivers : Modded Camera Driver for k800i/k810i
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Modded Camera Driver for k800i/k810i
Bookmark topic
100%
Now i send that driver from my phone to check...
I dont know, that driver is old, today i found on my hdd and put in my phone to try again.
http://rapidshare.com/files/94351891/camdriver0.dat.html
--
Posted: 2008-02-23 22:01:53
Edit :
Quote
@milan91
That driver does not have anything special, it's basically Wilma 2.5. So I have to ask you something:
1) There was light in the room when you toke that pics? (no totally dark?)
If there was some light, a slower shutter speed could make it blur (diffuse radiation)
2) You were holding the phone on your hand?
If yes, a slower shutter speed could make the pic blur because of hand micro-vibrations in 1/80s
So maybe with 1/250 the pic is static and with 1/80 is a little shaked
These should be the reasons!
--
Posted: 2008-02-23 23:54:34
Edit :
Quote
On 2008-02-23 23:54:34, jomateixa wrote:
@milan91
That driver does not have anything special, it's basically Wilma 2.5. So I have to ask you something:
1) There was light in the room when you toke that pics? (no totally dark?)
If there was some light, a slower shutter speed could make it blur (diffuse radiation)
2) You were holding the phone on your hand?
If yes, a slower shutter speed could make the pic blur because of hand micro-vibrations in 1/80s
So maybe with 1/250 the pic is static and with 1/80 is a little shaked
These should be the reasons!
1. no, in room total dark
2. yes hand, next time i will try to hold on leg
lol
I dont know, maybe...
Now i am using your 2.35
[ This Message was edited by: milan91 on 2008-02-23 23:42 ]
--
Posted: 2008-02-24 00:41:20
Edit :
Quote
Hi. Just want to add one point.
Original Kopritis 2.7 didn't come with a sharpness of 08. Later many people (including Kopritis) tried and said that sharpness 08 gives good results. I think the discussion about this issue is still in the earlier pages of this thread.
Maybe because of this reason most Kopritis 2.7 circulating around have been modified in this way.
_________________
[ This Message was edited by: chrisgestapo on 2008-02-24 03:46 ]
--
Posted: 2008-02-24 04:44:48
Edit :
Quote
On 2008-02-23 19:10:32, SPiTFiREgr wrote:
Token with Kopritis 2.7_flash settings 3.7_fix 100 compressions @ Document Mode
I have a question for you. Which I should prefer between Kopritis 2.7 with fixes and Kopritis 3.71? [consider that im thinking that these are the best 2 camdrivers available. correct me if i'm wrong]
Also, συγχαρητίρια Κοπρίτη για την δουλειά σου (; Θα ήμουν χαρούμενος να με βοηθήσεις εσύ ο ίδιος για την επιλογή μου!:D
And at last but not least. What is the best sharpness setting? The best-giving-result i mean. 4? 5? 6?
Thnx for your help in advance (:
Keep the 2.7 with shrp 06... also make the compression 95%
[ This Message was edited by: kopritis on 2008-02-24 08:17 ]
--
Posted: 2008-02-24 08:57:19
Edit :
Quote
On 2008-02-23 23:54:34, jomateixa wrote:
@milan91
That driver does not have anything special, it's basically Wilma 2.5. So I have to ask you something:
1) There was light in the room when you toke that pics? (no totally dark?)
If there was some light, a slower shutter speed could make it blur (diffuse radiation)
2) You were holding the phone on your hand?
If yes, a slower shutter speed could make the pic blur because of hand micro-vibrations in 1/80s
So maybe with 1/250 the pic is static and with 1/80 is a little shaked
These should be the reasons!
is not only that look carefully the driver...
maybe did you not see the:
#SET_REG(19,
50) // JPEG_INIT_QUALITY = 0x4B = 75d
#SET_REG(20,
5a) // JPEG_BURST_QUALITY = 0x50 = 80d => 700kB images -
And the orginal of my 2.7mod is with shrp 06
[ This Message was edited by: kopritis on 2008-02-24 08:18 ]
--
Posted: 2008-02-24 09:05:55
Edit :
Quote
is not only that look carefully the driver...
maybe did you not see the:
#SET_REG(19,
50) // JPEG_INIT_QUALITY = 0x4B = 75d
#SET_REG(20,
5a) // JPEG_BURST_QUALITY = 0x50 = 80d => 700kB images -
That does nothing on image quality ... the slight JPEG compression changes that we made are not obsevable by human eye, and ...
- JPEG_INIT_QUALITY does nothing if you don't change property5
- JPEG_BURST_QUALITY is used for BestPic only
Cheers
--
Posted: 2008-02-24 14:47:19
Edit :
Quote
hi!i have installed kopritis 2.7 35 fps,is the same driver in all 2.7 versions?or...which is the best 2.7 version?i seen that there are too much versions...
thanks.
with the 2.7 35fps,could be the possibility of damage camera or video?(recording video,because is a bit forced to record in 35fps)thanks!
[ This Message was edited by: danekro on 2008-02-24 16:05 ]
--
Posted: 2008-02-24 17:00:49
Edit :
Quote
have you tried comparing the pic qualities from ultimate withan latest version to kopritis 2.7? which is much better? @ danekro
--
Posted: 2008-02-24 17:20:39
Edit :
Quote
[ This Message was edited by: Goldmen on 2008-04-01 20:29 ]
--
Posted: 2008-02-25 00:09:21
Edit :
Quote
New Topic
Reply
