>
New Topic
>
Topic Locked
Esato Forum Index
>
Regional >
Asia Pacific
> Smartnet Corner (PH)
Bookmark topic
butas.... diba yung keypad ng p800 eh naka dikit sa lcd? all the keys ng keypad...when u press it tutusok sya sa lcd.... so lahat po ng pang tusok non eh nag mark sa lcd ng p800 ko and made a hole!!!
nang gamitin ni carlos ang pda ko.... wala syang nakitang butas.. imposibleng di nya yon makita...and he admitted na di nya nakita na may butas.... tapos ng kukunin ko na eh meron na dahil daw sira ang keypad ko dahil mahirap daw i press ang keys yon daw ang sbi ng technician...........
nag papa upgrade lang ako ng software......
sana briti... gawaan nyo naman ng paraan ito
sa mga technician ng smartnet... wag nyo naman ipasa sa client nyo ang nasira nyo.... ipinasok sa inyo ng buo ang unit.... and walang sira ang lcd......pag ilalabas na eh meron na sira ang lcd.....
nasa inyo pa ang p800 ko....... paki imbestigihan naman mga bossing ng smartnet....
--
Posted: 2004-02-11 23:30:56
Edit :
Quote
@britri2
Please See PM regarding my Z200.
Thanks
--
Posted: 2004-02-12 07:11:52
Edit :
Quote
does any of the sw upgrades for the z200 gives it mms capability?
--
Posted: 2004-02-12 10:01:57
Edit :
Quote
@Lethal_cassanova
Thank you for bringing up the matter to us regarding your concern. I have spoken to our technical supervisor and the people you mentioned to get the clear picture of the situation.
Looking at your phone now, I have noticed that most of the impressions are on the left side of the touch screen ( the plastic on top of the LCD ) and not on the LCD itself as you have claimed . These impressions are caused by the direct contact of the keypad to the touch screen. These impressions take months of usage and considerable pressure for it to appear and cannot simply appear overnight. Take note that the keypad is supported on both sides by a protruding plastic in the keypad termed “ ears “. These ears act as a support mechanism when using the keypad keys when pressed with a reasonable amount of pressure thus will prevent making impression on the touch screen. With that, prior to having your cell upgraded by our technicians our staff pointed out the one of the ears has been broken and was mentioned to you beforehand in which you readily affirmed. Although the keypad still can be used even without replacing it with a new one, continued usage of the defective keypad will cause such impressions to appear underneath the keypad. The only remedy that can be done is to buy a new keypad to replace the defective one so as to avoid having and making any damages on the screen. That is why there are screen protectors available in the market to protect the screen from damage(s).
Let me repeat, the impressions on your touch screen were caused by your keypad being defective and having direct and applied contact with the touch screen.
@ nes
please see PM.
@ odyig
will verify with the manufacturer.
thanks and advance happy valentines to all.
--
Posted: 2004-02-12 10:40:35
Edit :
Quote
briti....si carlos ang nag received ng unit ko... he used the pda.... matagal na sya sa company nyo... so imposibleng di nya makita ang ganon ka visible na marked sa lcd.... yung hindi ko nga nakita na sinabi nyang scratches sa faceplate eh nakita nya.... mas di hamak na madaling makita ang nasa lcd compared sa faceplate....
paano masasabi ng technician nyong sira ang keypad ko.... unless otherwise nag press sya ng madiin sa keypad that caused the marked sa lcd....
yes the marks can be done overnight.... and you know it can be done overnight kung i press mo ang keys harder.... kung tingin mo sira ang keypad...i press mo ang keys harder para makuha mo ang desired command....
gaya nga ng sabi nyo kay gowin.... binago nyo na ang procedure nyo sa pag tanggap ng unit...inspect nyo muna kung may scratches, any defects bago nyo paiwan sa client nyo
kahit kanino mo ipagamit ang pda ko, kahit sa isang school grader na marunong gumamit ng phone... makikita agad ang mga marked sa lcd.... kahit hindi ka well versed sa p800 eh makikita mo yon... si carlos eh matagal na sa smartnet considering that he is already a supervisor and as an employee mas mahigpit ka sa pag check compared sa kahit sinong gagamit ng pda ko..
pls have it checked by someone else... and get honest opinion kung makikita agad ang mga marked sa lcd ko...
please lang briti.... may employee ka na nag received ng unit ko and nag checked.... wag nyo i blame sa akin ang nasira ng tauhan nyo....
i will be asking for professional help and published my experienced soon.
pls have a thorough investigation and acknowledge the facts that i have stated....
thanks
[ This Message was edited by: lethal_cassanova on 2004-02-17 23:23 ]
--
Posted: 2004-02-12 12:29:16
Edit :
Quote
is it possible to upgrade the firmware and change the language pack as well? im using R7A right now but i don't know what the language pack is, its just that my contacts appears as medium size text even though it is set on small text size
--
Posted: 2004-02-12 12:47:08
Edit :
Quote
@ paul21
is your phone a t68i/ie/m/mc? the current sw version for the t68 is R8A.
thanks
--
Posted: 2004-02-13 01:18:39
Edit :
Quote
to anyone who has upgraded their T610 to the latest firmware (R4C, right?) what are the improvements with regards to menu and T9?
--
Posted: 2004-02-14 06:19:51
Edit :
Quote
cassa... i went to smartnet last saturday planning to have my P900 upgraded and i cant help but to check the "butas" of your unit.
question... how was the EAR of the flip got broken?
--
Posted: 2004-02-16 05:27:23
Edit :
Quote
@cassa, I was in the area so I decided to drop by smartnet and checked your unit.
Below are my comments/conclusions:
1. First I noticed that the left ear of the flip is broken/missing.
2. I didn't spotted the "markings" immediately especially with the lights on unless you look from the rear area.
3. What time did you left Smartnet? I don't think the markings can be done overnight. (I should know coz I'm a P800 user for more than a year now)
4. The said markings are only obvious with the OK, 1, 4, 7, * keys. It seems that the markings were the result of the broken left ear of the flip and created blot on the LCD.
And that's my honest opinion.
[ This Message was edited by: jepaz on 2004-02-16 09:37 ]
--
Posted: 2004-02-16 10:35:50
Edit :
Quote
New Topic
Topic Locked
