Esato Mobile
Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic
Page <  123 ... 385386387 ... 996997998>

Coquito Posts: > 500

@vmzaneti: i have a k750 with sarmad 5.7 driver, and i don t have any problem. i have RBIC002 and my phone is cid49
--
Posted: 2007-06-11 01:39:04
Edit : Quote

lpd2 Posts: 29

somebody has link of Kriomag 21,91 with Raider mod very liked this drive
--
Posted: 2007-06-11 03:55:17
Edit : Quote

janek Posts: 39


1. Using Fine quality mode switches on Spot Photometry.. if you go to Normal mode, it's back to Center-weighted as usual.

2. no, there are no profiles to keep the driver simple and easy to use for everyone, although you can always adjust settings for any particular shot. for instance for most sports you would want to just set the manual focus to infinity (1.1) to take a quick shot without waiting for autofocus.

3. There is no manual shutter option, however there is manual focus.. when macro mode is on, the zoom keys change the focus.. 1.0 is autofocus, 1.1 is infinity, and 4.0 (the maximum) is the closest possible range.

my driver isn't intended to have zillions of different options, but to be a high quality simple camera driver with the enhanced mode functionality that everyone can use.

Helo Sharmad. In your 5.7 spot driver you forget switch on the spot photometry. Fine and normal use the same 06 02 00 01 00 08 #CMD_END;(no spot) line. I think in fine must be 06 02 00 01 01 08 #CMD_END; (spot on)
Before I edit: 06 02 00 01 00 08 #CMD_END;(no spot)

After edit: 06 02 00 01 01 08 #CMD_END;


[ This Message was edited by: janek on 2007-06-11 06:15 ]
--
Posted: 2007-06-11 06:56:59
Edit : Quote

pakraider Posts: 313

janek,

you must have downloaded a very old link.. i issued a bugfix almost as soon as I uploaded the original driver.

here are the links since they havent been posted in a while and people might be looking for them..

For W810 users:
Sarmad 5.7 driver: http://www.mediafire.com/?6njgyymqtlx
Sarmad 5.7 w/ Spot Photometry: http://www.mediafire.com/?3wntxdhyeqz

For K750/W800 users: (sharpness 5 and extra init line to prevent crashing)
Sarmad 5.7 for K750/W800: http://www.mediafire.com/?e6nbhywy2nd
Sarmad 5.7 w/ Spot Photometry for K750/W800: http://www.mediafire.com/?bzzxt3dudze


[ This Message was edited by: sarmadgilani on 2007-06-11 06:39 ]
--
Posted: 2007-06-11 07:37:43
Edit : Quote

janek Posts: 39


On 2007-06-11 07:37:43, sarmadgilani wrote:
janek,

you must have downloaded a very old link.. i issued a bugfix almost as soon as I uploaded the original driver.

here are the links since they havent been posted in a while and people might be looking for them..

For W810 users:
Sarmad 5.7 driver: http://www.mediafire.com/?6njgyymqtlx
Sarmad 5.7 w/ Spot Photometry: http://www.mediafire.com/?3wntxdhyeqz

For K750/W800 users: (sharpness 5 and extra init line to prevent crashing)
Sarmad 5.7 for K750/W800: http://www.mediafire.com/?e6nbhywy2nd
Sarmad 5.7 w/ Spot Photometry for K750/W800: http://www.mediafire.com/?bzzxt3dudze


[ This Message was edited by: sarmadgilani on 2007-06-11 06:39 ]

Sorry!

--
Posted: 2007-06-11 08:21:40
Edit : Quote

lord_kin0 Posts: 35


On 2007-06-11 01:29:00, Chopz wrote:
Here's some pics taken today with my W810i R4EA031. All settings on AUTO. I'm lucky to own two of them so it's easier to take the same shot almost a few secs apart. I want to try Sarmad's next.


I like the colours in the modded one but don't like the haze/fog that comes with it. Reminds me of the stock 4.5 driver. The original 21.91 is overall better imho


[ This Message was edited by: Chopz on 2007-06-11 00:45 ]



before you try sarmad's drivers, try something else. try to compare to pictures taken with the same driver, same setings, same firmware but different w810s. i have done this test, and the pictures have a lot of differences. i can't find the pictures anymore, to show you, and don't have the possibility to run the test again, but if i find those photos, i will show you.

please do that, to see if it confirms. maybe one of my phones had some issue and that could be the reason the pictures had more blur than the other. though, that phone is mine, and it works perfect with other drivers, like kriomag's.
--
Posted: 2007-06-11 09:35:16
Edit : Quote

Raiderski Posts: > 500

@Chopz
thanks for test but you must pay attention on small difference:

1. original 21.91 default exposure value is at -0.3EV
2. modded 21.91 default exposure value is at 0.0EV

this explain brighter picture and because of this pictures done at auto settings cannot be compared. besides if you compare again not in good sunlight but in poor light then picture from modded version should look better. and the last thing:

1. why not to use EV value correction? 0.0EV isn't always the best, this is just the point of reference
2. in my last mod at top of the driver code i've placed all values which can be changed by everyone. there is also exposure value after camera start and many others: sharpness, saturation, contrast, brightness, compression, zoom in manual macro preview, shutter speed in enchanced modes - it's very easy now to set your own favourite settings.

lord_kin0 has right about W810 pictures. some of them looks very good but there is also pictures with visible contrast/brightness problem :|

_________________

http://www.flickr.com/photos/8469432@N06/
W800 CID36 R1BD001

[ This Message was edited by: Raiderski on 2007-06-11 09:41 ]
--
Posted: 2007-06-11 09:49:32
Edit : Quote

kukuh Posts: 53

@ SPU

please check your camdrvr 1.3beta3
it has bug in video recording.especially for night mode,maybe problem in FPS and Shutter speed.......



--
Posted: 2007-06-11 09:51:48
Edit : Quote

ptkstep Posts: 52

@Raiderski
I want to test your last mod 21.91. Can you post download link again,please?
--
Posted: 2007-06-11 10:39:29
Edit : Quote

Raiderski Posts: > 500

@ptkstep
here... http://www.raider.block.punkt.pl/camdriver0.dat
in case of link/CID problem send me PM
--
Posted: 2007-06-11 10:47:18
Edit : Quote
Page <  123 ... 385386387 ... 996997998>

New Topic   Reply
Forum Index

Esato home