Sony Ericsson / Sony : Software, Firmware and Drivers : Number1 2.8 final k790/k800/k810 camdriver
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Number1 2.8 final k790/k800/k810 camdriver
Bookmark topic
On 2007-10-11 11:23:37, number1 wrote:
when it's quite dark the noise filter gets over powerful even when using flash so use the joystick and increase the exposure to +2.0
I did that too. But when I did that, the IS_LED won't turn on. I can't get focus.
--
Posted: 2007-10-11 12:12:02
Edit :
Quote
Camdriver 2.81
Macro
INFINITO
--
Posted: 2007-10-11 12:26:49
Edit :
Quote
@mauasca
thanks for the sample shots...
are these taken with AUTO White Balance?!
--
Posted: 2007-10-11 12:57:05
Edit :
Quote
looks like auto to me
--
Posted: 2007-10-11 14:00:13
Edit :
Quote
On 2007-10-11 08:04:41, rockygali wrote:
yes! even daylight macros. coz thats how you use that feature in K800/810
dont use auto... try playing around with the cam to show off its best asset.
and when comparing, of course use same settings for both drivers.
just try to achieve the best possible shots.... so that we can notice our developments....
ok,i've noticed that when taking images in a low light conditions,with the document settings,it never fires the flash.....
so you acatually cant allways use this setting for macro shooting.
--
Posted: 2007-10-11 14:13:28
Edit :
Quote
sirs, ive just loaded a new camera driver (2.
using XS++. it went well but after turning on the camera, i could hardly see the difference. How am i going to determine whether the camera driver was indeed properly installed? Are there new settings/options added?
--
Posted: 2007-10-11 15:00:45
Edit :
Quote
On 2007-10-11 14:00:13, number1 wrote:
looks like auto to me
??[OT] My auto is "Renault Megane"[\OT]
_________________
My Phone
K800i@K810i R6BC002 + CamDriver_Number1_2.80 + lighteffects+ HPM-70 + Peter's acoustic V1.
[ This Message was edited by: mauasca on 2007-10-11 19:18 ]
--
Posted: 2007-10-11 16:23:20
Edit :
Quote
On 2007-10-11 15:00:45, reywal wrote:
sirs, ive just loaded a new camera driver (2.
using XS++. it went well but after turning on the camera, i could hardly see the difference. How am i going to determine whether the camera driver was indeed properly installed? Are there new settings/options added?
Go to service menu
> *
Service Info - Software Info
Camera SW versions
Camera Current : 2.5 ( This is original driver version)
If you have changed camdriver, the version should change too.
P.S.
> = Joystick right
< = Joystick left
--
Posted: 2007-10-11 16:24:48
Edit :
Quote
On 2007-10-11 11:23:37, number1 wrote:
On 2007-10-11 05:13:03, genus wrote:
On 2007-10-10 18:20:50, number1 wrote:
try installing the usb flash driver where setool2 lite is u will see a folder called drivers open then open the usb_flash_driver folder double click
gg-setup.exe it will setup the usb drivers u need then try following my guide again.
Does any1 think the k800i camdriver will benifit from having an extra iso value, the k770 has iso 1500 but the k800i doesn't, and wot does the iso acuallty do.
I dont think so, since it can cause more noise,
i found that the 2.8 also having the same problem, when flash on (iso400), there is still having many noise. Since the 2.81 also the same, seem nothing change in colour..
when it's quite dark the noise filter gets over powerful even when using flash so use the joystick and increase the exposure to +2.0
so, we need to increase exposure to reduce the anti-noise filter, right?
--
Posted: 2007-10-11 17:15:23
Edit :
Quote
@rockygali
Yes AUTO White Balance
--
Posted: 2007-10-11 20:21:34
Edit :
Quote
New Topic
Reply
