>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> WotanServer
Bookmark topic
which phone are you trying to fix?
_________________
Visit
http://www.totalgsm.org for unlocking and debranding services. New Competition on forum and Sports talk
[ This Message was edited by: totalgsm on 2008-03-24 14:18 ]
--
Posted: 2008-03-24 15:17:06
Edit :
Quote
right, if that doesnt work either:
1. get setool2lite 1.11 and drag the main onto qamaker.exe (in the setool directory). you will then have a quick access vkp patch. this method will take around 15 mins to complete
Load up the software and change the Phone Type to K800.
In the big box on the right (Files area), click on Add and select the MAIN file.
Now, in the MISC files area, browse to the VKP file that was created before ...
Now click on the FLASH button
Connect the phone as per usual by taking out the SIM card, then the battery. Re-insert the battery and whilst holding down C button on the phone, connect it to the USB cable (other side of it should already be plugged into your computer).
Flashing will begin. After a while, it will ask you to remove the cable, remove the battery, re-insert battery, click READY and then re-connect it to the USB cable whilst holding down the C button.
Again, after another while, it will ask you about the script file, just click on the NO button to apply.
After a couple of minutes, it will be completed and you can disconnect the phone from the USB cable. (the program will look like its not doing anything, WAIT UNTIL YOU SEE 'ELAPSED XXX SECONDS' then it is safe to unplug the phone)
(taken from
here)
or
2. get/borrow a service cable and attempt the flash again
--
Posted: 2008-03-24 15:17:39
Edit :
Quote
On 2008-03-24 15:17:06, totalgsm wrote:
which phone are you trying to fix?
_________________
Visit
http://www.totalgsm.org for unlocking and debranding services. New Competition on forum and Sports talk
[ This Message was edited by: totalgsm on 2008-03-24 14:18 ]
SE K800i (3 UK)
--
Posted: 2008-03-24 15:20:39
Edit :
Quote
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit
www.setool.net and buy FULL.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3539 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Chris\Desktop\k800\K800_R1KG001_MAIN_GENERIC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
verify block error
last blk:449C0000,00010000
Elapsed:125 secs.
It didn't work i'm afraid guys. The USB disconnect noise was sounded and it paused. DOH!
--
Posted: 2008-03-25 10:11:08
Edit :
Quote
I take it I need a service cable then?
--
Posted: 2008-03-26 09:18:44
Edit :
Quote
you can try one, but im not sure if it will work though.
--
Posted: 2008-03-26 18:10:36
Edit :
Quote
What do you reckon is up with the phone?
--
Posted: 2008-03-26 20:10:05
Edit :
Quote
Hi there.
Well i've still got this bricked k800i. It decides to connect to my PC when it feels now. Earlier my pc came up with "new device found - Sony Ericsson Flash Device" but now the pc can't find it at all.
I'm thinking about shorting the phones battery terminals out.
Any advice on how to do this?
Thanks.
--
Posted: 2008-05-05 23:31:42
Edit :
Quote
New Topic
Reply
