News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Raider camera driver for K790, K800 and K810 (v6.6.5) Bookmark topic



I don't understand why u can't use joy up/down for change functions?
value changing in Horizontal so joy left/right is good for this.if u work with this key after 1 week u see this key is good for value.but i add ability for swap keys in next version.

and what's new in v6.6.5?
please tell me to update may patch.
tanks

--
Posted: 2010-01-15 11:27:38
Edit : Quote


winter time, I had a lot of problems with autoexposure, pictures are often underexposed because of gray sky and snow everywhere. so, I decided to make EV correction much faster and friendly like it was in original driver

6.6.5 [2010-01-15]
- after camera start exposure correction (EV) can be set like in original driver
using joystick left/right - open the camera, correct EV if necessary and take picture.
this is most intuitive and fastest method to correct EV if you don't use manual
functions for other settings, otherwise:

selected in this way EV correction is canceled after first change in any manual
function, except of function at position 0.0 which is neutral EV position

for example:

1) you want to set focus infinity/other using manual focus (function 0.0, step 1)
do it and you still will be able to change EV correction using joystick

2) you want to set SEM mode (function +1.0, step 1)
when you go to function +1.0 you'll notice change of EV correction (to +1.0EV)
but if you then set step 1:
* the camera is informed that change of EV position was not EV correction
but selection of position to function which you just changed
* EV correction will go back to auto value (0.0EV for most scenes)
* EV correction using joystick is no longer possible until you close and open
camera again
--
Posted: 2010-01-15 11:41:36
Edit : Quote


I'm the first to download v6.6.5
--
Posted: 2010-01-15 12:01:11
Edit : Quote



my phone is R8BA024 CHINA version...
--
Posted: 2010-01-15 12:04:39
Edit : Quote


Raiderski;

this isn't good because
after change EV i change value of some functions but EV reset why don't save EV value?
and for change EV again must use EV function or close/open camera and chang EV with joy.some of times we forget this and use joy for change EV but not work.

and with my patch can change very fast EV value and i don't think needed to use v6.6.5

and about joy up/down u can change EV in first with joy up/down without any problem.

--
Posted: 2010-01-15 12:30:38
Edit : Quote


@ Amir
salam
Agha dastet dard nakone. chiz jalebi shode . mamnoon.
--
Posted: 2010-01-15 13:57:03
Edit : Quote


Raider OSD patch added for K800 SW-R8BF003
in this post:

http://www.esato.com/board/viewtopic.php?topic=170579&start=3994

--
Posted: 2010-01-15 14:31:05
Edit : Quote




@Amir_82111
k810 R8BA024 please..
--
Posted: 2010-01-15 15:28:33
Edit : Quote


small mistake in show value 1/5 instead 2/5
fixed.
please redownload.
in this post
http://www.esato.com/board/viewtopic.php?topic=170579&start=3994
--
Posted: 2010-01-15 18:53:21
Edit : Quote


Raiderski;
please test my patch in change/reset functions value and report bugs
tanks
--
Posted: 2010-01-15 20:50:08
Edit : Quote

---

New Topic   Reply

Forum Index