>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Technical
> msi usb bluetooth key (MS-6967)
Bookmark topic
try the floAt's mobile agent. it wored for me
--
Posted: 2002-10-23 20:24:00
Edit :
Quote
Ok I think it's time to add some more to this thread.
I have been having trouble getting the send to pc from phone to work even using the TECOM version 16 software. When I first installed it it worked fine but when I rebooted the next time it wouldn't work. The send file to phone carried on working fine using My pictures and the XTND worked too. Incidentally to get these working again after upgrading to version 16 I had to uninstall them all and reinstall them once version 16 was installed.
So last night I tried tackling the send file to pc from phone problem.
I uninstalled everything and just reinstalled the version 16 software. I removed the usb bluetooth driver and reinstalled that successfully, however, the send to pc still wouldn't work.
So I then tried unplugging the bluetooth key and plugging back in. Now this seemed to be the probelm. I then tried sending from phone to pc and it worked! However, only once and then the dreaded 'no bluetooth devices found' message on my phone came back.
Incidentally in a previous thread I said you need to pair your phone to send to pc. This is not the case. It works better if you don't. However to send from pc to phone using the ericsson software pairing and connecting a serial port to a COM port is essential.
So back to the problem. I unplugged the key and plugged back in again and it worked again. This time it carried on working all night. So I don't know if this is an inherent problem I have on my system or if it is something universal because I have read on previous threads that people have sent to pc once and then it stopped working either when they reboot or even when they don't. I certianly have had no problems sending from pc to phone once the software and everything else is set up properly, just this damn problem with the sending to pc from phone.
It seems I have solved the problem, however, it means that everytime I reboot there is a chance that I have to unplug and replug in my BT key, but a small price to pay to get it working to tranfer all my MCA-20 pics to pc.
If anyone else has had similar problems with sending to pc even with the version 16 software which supports OBEX push then I suggest they try this method and let me know how you get on.
I hope it helps someone!
--
Posted: 2002-10-30 12:49:00
Edit :
Quote
@drhigh
a long time ago (when this thread was much shorter
), we have discussed the same issue regarding the need to un-insert the adapter while booting the PC. there is no known work around other than making sure that you reboot the PC without the adapter, then put it back when booting is done. (now, this is an intermittent problem. sometimes, you can leave the adapter without it causing any problem)
@biohazard
have you "upgraded" your firmware? please read the instructions on how to do it a few posts/pages back.
--
Posted: 2002-10-30 13:14:00
Edit :
Quote
I expect this has already been covered somewhere but it seems to be unclear. To send files pc->phone with the widcomm software you do not need to use either sendfile or fma. Just drag and drop the file into the \"Inbox\" service of the phone in \"My Bluetooth Places\" and the file transfer occurs. Still wish it could be as easy as right clicking on a file but at the moment that only works for FTP profile and not ObjectPush
This post was posted from a WAP device
--
Posted: 2002-10-30 13:50:00
Edit :
Quote
That's a great tip about the inbox. I haven't seen that anywhere before. It works a treat.
--
Posted: 2002-10-30 19:54:00
Edit :
Quote
I can't seem to get the drag and drop thing to work
I'm using widcomm software, but when I try to drag and drop, I cant because it comes up with the "no entry" type icon.
Just to check, is this the window I'm meant to drop it into?
My MSI drivers are 1.2.1.20
Using FMA and the Mobilet software, file transfer to the phone works fine though.
Another problem I have is sending to the PC from the phone.... it finds my computer, but then says the sending failed when I try to transfer the picture. What do I need to do to get this working?
Thanks
[ This Message was edited by: WinKy on 2002-10-31 16:16 ]
--
Posted: 2002-10-31 17:13:00
Edit :
Quote
Its probably because you're using the old drivers.
For everyone
Use this link to upgrade to version 12.2.2.16 link here.
This link works on 31/10/2002. Can promise how long though.
http://www.tecomproduct.com/asp/download.asp?id=164
I suggest you use a download manager (unless you're got broadband
)
--
Posted: 2002-10-31 18:02:00
Edit :
Quote
I Have the bt workin great with my fone. problem is i have 2 t68i's - it wont let me set up 4 different ports 2 on each. can anybody help?
--
Posted: 2002-10-31 23:47:00
Edit :
Quote
send files pc->phone using widcomm 1.2.2.15 (inbox) works fine with me
--
Posted: 2002-10-31 23:56:00
Edit :
Quote
I got the first ericsson usin comm 7&8 - the 2nd one usin 13&14 - PC Control works fine. but i don't think MPM likes comm ports 10 upwards. any ideas? copying to inbox wont transfer themes, only sounds/pics/contacts
--
Posted: 2002-11-01 00:04:00
Edit :
Quote
New Topic
Reply
