News Forum Phone database

> New Topic
> Topic Locked
Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Hybrid Camera Driver for W800i/K750 Bookmark topic

thanks for posting the R1A044 driver

Ive missed it for a long time
--
Posted: 2006-07-23 02:16:32
Edit : Quote


after installed the R1A044 Camdriver.. my camera started to crash.. no idea what are the causes, are this camdriver compatible with latest R1CA021 firmware?
--
Posted: 2006-07-23 05:07:04
Edit : Quote


This is what in the R1A044 driver.......
Quote:// Clara camera driver setup file
//************************************************************************
//
// Revision history:
//
//***********************2005-04-27 R T L 2 *******************************
// =======
//
// 3.8 Moved code from seq_ss_start to seq_ss_take
// This changes the time when the platform resets the image buffer
// (which is a patch in the platform for problem with FF D9 sometimes
// missing in the jpeg stream
//
// Also: change compression degree and MIN size limit, when accessory
// flash is used. This is to prevent risk of retake snapshot in
// accessory flash situations. (We don't want any retakes because
// flash will only be fired during the first image.)
//
//
//***********************2005-04-14**** R T L Release********
// =======
//
// 3.7 Night mode exposure changed from 10fps to 5fps for still/vf image
// Digital sharpening and contrast levels changed
// White balance values for flash LED changed, done when entering seq_ss
// FIFI clearing added
//
// *************************2005-04-12****************
//
// 3.6 Retrials of JPEG changed to 9
// Wait for capture and a delay of 1ms before reading the status register E3
//
// *************************2005-03-29 ***************************
//
// 3.5 Effects problem when using Power save solved
//
// *********************2005-03-21 ******************************
//
// 3.4 Read out Q-factor (even on failure mode of "gray image")
//
// ******************** 2005-03-15 **********************
// 3.3 Added polling in power save handling
// Increased maximum wait time in WAIT_FOR_MODE_TRANSITION
// LED property implemented
// VR frame rate set to 10 fps normal, 7.5 fps night mode
// Buffer size for 100x60 changed from 12 to 15
// 100X60, 160X120,320X240 and VGA have got same max value in standard and fine

// ******************* 2005-02-23 *************
// 3.2 Night mode fix: uses every frame at night mode and every secon at normal mode
// JPEG file sizes corrected
//
// 3.1 ************ 2005-02-14 ********************
// Changed nightmode frame rate to use each 2 frame again.
// Using each frame caused very dark snapshot images
//
// 3.0 *************** Corrected seq_ping; to seq_ping=; ********
//
// 2.9 ************ 2005-02-10 ********************
// Removed ping sequence
// Changed frame rates. Added macros to test VR frame rate.
// (VR_NORMAL_MODE_FR and VR_NIGHT_MODE_FR)
// Reinserted VF_TRANSITION_DELAY to fix VF->VR transition problems
// Lowered min value for VGA compression to 1 again
// Added small delay in power save property
//
// 2.8 ************* 2005-02-04 ******************************
// Changed buffer size for VGA
//
// 2.7 ********************** 2005-02-02 ***************
// Max size of a VGA JPEG image limited to 150kb
//
// Added a delay of 160ms between power save mode transition
//
// No delay before viewfinding for FP1.3 cameras and later
// Added property for power save mode (0x15)
//
//
// 2.6 ***************2005-01-31 *************************
// Added Xenon flash always ON for ITP (prop 0xe,2)
//
// ************************* Delivery of 2005-01-13 ************
// ****************************************************************
// Power save mode. The sensor stops scaning while the Host processes the JPEG
//
//
//
2,4 ************************ Delivery of 2004-12-21 ************
// *************************************************************
// This release is only for ITP***
//
// Changed connection test for size 30
// Added delay to each command by using CMD_END macro
//
// ************************* Delivery of 2004-12-09 **************
//******************************************************************
// 2.3 New delay time i transition mode
// Fixed bug in size 30
// delay of 100 ms from Vincenne to Vdd_SA
//
// ************************* Delivery of 2004-12-07 **************
//******************************************************************
// 2.2 Invert clk-signal in power down
// Test pattern for R&D (ITP), new size
//
// ************************* Delivery of 2004-12-07 **************
//******************************************************************
// 2.1 Exif data read out propery changed
// Delay of 100ms at starting all view finder sizes
//
// ************************* Delivery of 2004-11-27 **************
//******************************************************************
//
// 2.0 Fixed error in get auto focus status
// New properties for AF position status (for ITP)
// snapshot format and off-set fixed for R8
// Vincenne2 power supply for camera (ONLY FP1.1 OR LATER BUILDS)
// 1.9 Updated handling of YUV-snapshot
//
// 1.8 JPEG output sizes are changed. The change is only for verification and is
// not finilized.
// ************************* Delivery of 2004-11-15 **************
//******************************************************************
// 1.7 Updated sup_properties and properties according to requirement doc PA2
// Uses ping to reject old cameras
// New handling of discrete zoom
// 1.6 Third Release to Application SW, 2004-11-09
// Flipped values for property 5. Added property 12 (Qtable read).
// Fixed bug in ss->vf->ss transition. Added buffer sizes (for ITP use)
// 1.5 Second Release to Application SW, 2004-11-02
// 1.4 EXIF read, frame rates, status handling in transitions, burst mode
// frame rate 8-15fps, Changed power up sequence
// 1.3 Exposure changed, EXif=>get_prop, Jpeg size, DR marker removed
// 1.2 Frame rates included
// 1.1 Modiefied and updated properties (frame rate, Effects
// Zoom, Exif, AE, Prop 18,19,20,21)
// 1.0 First Release to Application SW
Properties, JPEG sizes name of module etc..
// 0.9 Added offset (first entry) to JPEG qtable factor
// 0.8 Updated JPEG values and corrected registers
// Updated properties
//
// 0.7 Updated JPEG calculation (added factors). Simplified some properties.
// 0.6 Added JPEG header
// 0.5 Updated properties. Default no mirror in init.
// 0.4 New power up sequence again
// 0.3 Updated power up sequence
// 0.2 Updated property handling
// 0.1 First test version by QWIKHAN
//
//*****************************************************************************

_________________
W800i R1AA008

[ This Message was edited by: 2uk3y on 2006-07-23 05:10 ]
--
Posted: 2006-07-23 06:10:01
Edit : Quote


@2uk3y
so you mean i should delete that part and my camera wont crash by any chance again?
--
Posted: 2006-07-23 06:20:27
Edit : Quote


i really don't know.
my camera is not crashing at all...
but yeah all of that stuff is all over the driver..
--
Posted: 2006-07-23 07:43:28
Edit : Quote


@ QuickShare™
no la i just wanna show the history log .......
maybe u can recopy it again, hope that help

@ Phantom
yeah me also dont have the crashing problem using the driver
--
Posted: 2006-07-23 09:12:59
Edit : Quote


Quote:
On 2006-07-23 07:43:28, Phantom wrote:
i really don't know.
my camera is not crashing at all...
but yeah all of that stuff is all over the driver..

what is your firmware? R1CA021 or R1BC002?

[ This Message was edited by: QuickShare™ on 2006-07-23 09:31 ]
--
Posted: 2006-07-23 10:31:17
Edit : Quote


@QuickShare™ : Hi, are tou try to reduce compression rate at 90%. If it can help you, Cerede's and mine Firmware version is R1BD001, at now, no one crash problem, only if i go beyond 93% .

@DeXx.

[ This Message was edited by: dekson on 2006-07-23 09:43 ]
--
Posted: 2006-07-23 10:42:36
Edit : Quote


welll i'm still on R1BC002.
that might make the difference, since you're on R1CA021 [i think]
--
Posted: 2006-07-23 10:48:32
Edit : Quote


Quote:
On 2006-07-23 10:42:36, dekson wrote:
@QuickShare™ : Hi, are tou try to reduce compression rate at 90%. If it can help you, Cerede's and mine Firmware version is R1BD001, at now, no one crash problem, only if i go beyond 93% .

@DeXx.

[ This Message was edited by: dekson on 2006-07-23 09:43 ]

oh great.. will try it out later on.. thx btw
--
Posted: 2006-07-23 10:48:56
Edit : Quote

---

New Topic   Topic Locked

Forum Index