>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Technical
> msi usb bluetooth key (MS-6967)
Bookmark topic
FYI - I have just ordered the MS-6967 from here, for just £36.48 + 5.95 next day delivery to a UK address :
http://www.tekheads.co.uk/tekheads/product?id=601036
--
Posted: 2002-11-12 11:13:00
Edit :
Quote
Is anyone able to send files from the T68i to the PC using MSI BT key and XP SP1 (without MS driver)
--
Posted: 2002-11-20 14:32:00
Edit :
Quote
cibalom@
yes. use the serial port instead of native bluetooth connection.
--
Posted: 2002-11-21 03:27:00
Edit :
Quote
is the msi usb BT adapter good enough for a t39? so i can use every single thing it supports? abit lazy atm just started reading on this site..and its TONS of posts:) and the r4a is latest software?
(btw anyway to turn on the vibrator for incomming sms+make it vibrate more? seems abit weak but just got it so havent tested it:/)
--
Posted: 2002-12-24 07:30:00
Edit :
Quote
@GREK
yes. quitegood enough. i used my adapter with the t39 first. (and yes, r4a is the latest firmware)
--
Posted: 2002-12-24 08:21:00
Edit :
Quote
thank you i will order one now:)
(im going to look thro the posts but if anyone can give me a link to the firmware update before i finds it i can take it:P btw should i install the ericsson software or not?)
mery cristmas everyone:)
--
Posted: 2002-12-24 18:09:00
Edit :
Quote
Quote:
On 2002-10-19 18:19, zippa wrote:
Help!!! I need some information!!!! Are there someone who knows if there are some bluetooth connector that supported by every motherboard? And the range is 200m? I know that the MSI 6968 work very well in door, about 150m, but there you need to have a msi bord.
I have a ABIt new bord, but i whant to have a good bluetooth connector. The MSI 6967 can not be true thar it will work 200m to, that have to be wrong..
Thanks!
hi, i'm using the 6967 add on card of msi. well yes you need an msi motherboard to be able to use it. but i discovered that the add on card still connects to a "reserved" usb port in my board, so in other words it's still a usb device, and my pc discovers it as a usb device. there's a way to to be able to use it on any moboard with any usb header pins available. But the problem is that you can't buy it anywhere, except if it's bundled with an MSI board.
Well, regarding the distance, it's true that it reaches up to 150 meters but the problem is that our t68i's cannot reach that distance to transmit. so 150 meters is useless for t68i's. haven't tried using two 6967's yet. and by the way, that measurement was based on a no obstruction setup. so doors, wall, etc. will definitely hinder the performance factor of the transmission. thanks
_________________
Wapsite:
http://wap41.com/randyrivera
Web:
http://www.pbase.com/randyrivera/thingies_for_sale[ This Message was edited by: randyrivera on 2002-12-30 10:27 ]
--
Posted: 2002-12-30 11:24:00
Edit :
Quote
hi just got my MSI usb key..
but the problem is it doesnt work! i installed msi drivers first, update to latest driver, then i deleted and got tecom .16 drivers.
no error windows or stuff like that. now i try to pair it and both pc and t39 find eachother but the computer says that t39 refuse the connection?
i can send my background from t39>pc, i can send my bussiness card etc..but since i cant pair i cant send pc>t39 right?
what is the problem? what should i do so i can pair and send stuff to the t39 from my computer?
i have not paired this or any device before.
(it seemed like the first pairing worked once in the beginning: i added the pc with my t39 and the pc responded with "what code?" so i typed it and it looked like a perfect pairing but! it did not show up in the t39 menu and since then it doesnt work. i could NOT use any of the services)
edit: ok i did a reinstall on the tecom and now i can pair them perfectly..BUT PMP(the ericsson thing r4a "phone settings") cant recognize the phone so just shows a empty list..what should i do? and now i just need to figure out how to connect the programs to the phone:) (please help hehe)
_________________
GREK4LIFE
[ This Message was edited by: GREK on 2003-01-02 18:43 ]
--
Posted: 2003-01-02 14:51:00
Edit :
Quote
@grek
you need to determine what port should MPM (not PMP) look for. by default, msi bt make com port 4 available, so set the MPM to search for com port 4.
--
Posted: 2003-01-03 03:45:00
Edit :
Quote
ok..
hmm i changed some in
phonemonitor.gif..is that right?
heres the bluetooth menu..does that look "ok"? or should i change anything there to?
bluetooth.gif
bluetooth.gif
its in swedish but the pics should be pretty clear to understand anyway
btw heres the
ericsson.gif menu when i run phone settings
edit: Avaktiverad=off (if the pics dont work copy the link then open a new browser to view them)
_________________
GREK4LIFE
[ This Message was edited by: GREK on 2003-01-03 08:46 ]
--
Posted: 2003-01-03 09:23:00
Edit :
Quote
New Topic
Reply
