Esato Mobile
Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
> New Topic
> Topic Locked
Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Hybrid Camera Driver for W800i/K750 Bookmark topic
Page <  123 ... 442443444 ... 462463464>

imsje Posts: 76

Quote:
On 2006-11-13 14:53:50, RENOSJ wrote:
OK, thanks for your cooperation! The differences between my favourite driver which I posted(it doesnt matter which version) and zuza were really caused by EV setting. SHIT

Conclusion - in indoors are the drivers equal, but in outdoors wins Zuza with better collors. Even more, zuza outdoor pictures are +/-570 kb! Its a miracle!

What else to say......iam going to do suicide, I doubted about zuza quality....


LOOK THESE DEFINITIONS in the ZUZU drv.

He defined SET_JPEG... and then not used !
Used JPEG... which is not defined ????


SET_JPEG_MAX=06 02 00 0D !1 !0 #CMD_END;
SET_JPEG_MIN=06 02 00 0F !1 !0 #CMD_END;
SET_JPEG_AVG=06 02 00 11 !1 !0 #CMD_END;
SET_JPEG_QUALITY=07 02 00 13 $w2 $w2 $w2 #CMD_END;

seq_set_prop_5_0=$z0 $p1 0e
$c1 00
$c0 02 $s2 55 #JPEG_MIN(00,03) #JPEG_MAX(00,05) #JPEG_AVG(00,04) #JPEG_QUALITY $cl
$c0 04 $s2 55 #JPEG_MIN(00,32) #JPEG_MAX(00,50) #JPEG_AVG(00,3C) #JPEG_QUALITY $cl
$c0 08 $s2 55 #JPEG_MIN(01,2C) #JPEG_MAX(01,90) #JPEG_AVG(01,5E) #JPEG_QUALITY
$cx $cx $cx
$cl
$c0 02 $s2 55 #JPEG_MIN(00,01) #JPEG_MAX(00,19) #JPEG_AVG(00,04) #JPEG_QUALITY $cl
$c0 04 $s2 55 #JPEG_MIN(00,01) #JPEG_MAX(00,96) #JPEG_AVG(00,3C) #JPEG_QUALITY $cl
$c0 08 $s2 55 #JPEG_MIN(00,01) #JPEG_MAX(02,48) #JPEG_AVG(01,5E) #JPEG_QUALITY
$cx $cx $cx
$cx;

seq_set_prop_5_1=$z0 $p1 0e
$c1 00
$c0 02 $s2 58 #JPEG_MIN(00,05) #JPEG_MAX(00,08) #JPEG_AVG(00,06) #JPEG_QUALITY $cl
$c0 04 $s2 58 #JPEG_MIN(00,50) #JPEG_MAX(00,78) #JPEG_AVG(00,5A) #JPEG_QUALITY $cl
$c0 08 $s2 58 #JPEG_MIN(01,90) #JPEG_MAX(02,48) #JPEG_AVG(01,F4) #JPEG_QUALITY
$cx $cx $cx
$cl
$c0 02 $s2 58 #JPEG_MIN(00,01) #JPEG_MAX(00,19) #JPEG_AVG(00,06) #JPEG_QUALITY $cl
$c0 04 $s2 58 #JPEG_MIN(00,01) #JPEG_MAX(00,96) #JPEG_AVG(00,5A) #JPEG_QUALITY $cl
$c0 08 $s2 58 #JPEG_MIN(00,01) #JPEG_MAX(02,48) #JPEG_AVG(01,F4) #JPEG_QUALITY
$cx $cx $cx
$cx;

-------------------------------------

same for

VR_NORMAL_MODE_FR=44;
VR_NIGHT_MODE_FR=1c;

never used in the driver zuzu .


--
Posted: 2006-11-13 16:32:25
Edit : Quote

Neotracer Posts: 30

imsje can u release a fix version?
--
Posted: 2006-11-13 16:59:17
Edit : Quote

ToryXX Posts: 495

imsje is ZUZA...mit ,,za,, and used not used this driver make good quality pictures
--
Posted: 2006-11-13 17:00:08
Edit : Quote

ToryXX Posts: 495

i don't understand this ,,v7.82 LED flash auto settings , fine mode, night ,EV -2.0,close distant,, how can change ´2.0 close distant?-.....where in drivere?...because this is sound a little bit strange
--
Posted: 2006-11-13 17:05:08
Edit : Quote

RENOSJ Posts: 14

Yes, Zuzi driver(hehe can modify only the author. I tried to change frame rate(not record,just view), but no result. The same problem with jpg compresion. Some lines are different, some of them are missing...........In this area - author is a god - only he can change that masterpiece driver.......no doubt.
--
Posted: 2006-11-13 17:15:34
Edit : Quote

ToryXX Posts: 495

what you wrote is trues ...i made it like this and results are very good!

zuza driver with 0.0 EV


http://img212.imageshack.us/img212/6168/dsc04992du4.jpg full size


and here zuza driver to - 0.7 EV more sharper the same results like in 7.82...or the another driver ....


http://img212.imageshack.us/img212/4130/dsc04994mm5.jpg


and this is just to the close distance .. when you take a shot!

Quote:
On 2006-11-13 13:22:38, 2uk3y wrote:
I run some test using different EV value. looks like when EV 0, 7.82 more dark than zuza. so that make it a bit sharp. so after increase the EV value, the sharp slowly decrease coz the picture have more bright.
so when tested zuza driver, i try to decrease the EV value. then i see more sharp in the picture.
so what i see that maybe......
7.82 (EV 0) = zuza (EV -07) and zuza (EV 0) = 7.82 (EV +07) .......!!!

7.82 - night mode, EV 0
http://img93.imageshack.us/img93/3596/2006111319461gi7.jpg

7.82 - night mode, EV +0.3
http://img329.imageshack.us/img329/6069/2006111319491nh3.jpg

7.82 - night mode, EV +0.7
http://img93.imageshack.us/img93/3985/2006111319501uz8.jpg

zuza - night mode, EV 0
http://img329.imageshack.us/img329/4088/2006111319521ty7.jpg

zuza - night mode, EV -0.3
http://img151.imageshack.us/img151/1460/2006111319531rd6.jpg

zuza - night mode, EV -0.7
http://img329.imageshack.us/img329/1303/2006111319541kx9.jpg

PS : hmmm....... what i saw that u all test this 2 driver in indoor, try test it on outdoor...... if i not mistaken, some of u already test it, and zuza win when outdoor, i guess !!!!!


--
Posted: 2006-11-13 17:55:39
Edit : Quote

gprsman Posts: 269

Quote:
On 2006-11-13 12:38:14, RENOSJ wrote:
7.82 driver is here.

http://www.filefactory.com/file/92c4fb/


My info software 7.130 not 7.82 is possible??link camdriiver 7.82 please .thanks.
--
Posted: 2006-11-13 18:20:12
Edit : Quote

ToryXX Posts: 495

here is it is

http://www.filefactory.com/file/cf4100/


v7.82 LED flash auto settings , fine mode, night ,EV -2.0,close distant
--
Posted: 2006-11-13 18:39:34
Edit : Quote

gprsman Posts: 269

Quote:
On 2006-11-13 18:39:34, ToryXX wrote:
here is it is

http://www.filefactory.com/file/cf4100/


v7.82 LED flash auto settings , fine mode, night ,EV -2.0,close distant



Ciao ToryXX


You have tested photo with driver 7,82 in the open air?


I have seen your ace in photo six much beautiful one like girl


I'mitalian hehehe
--
Posted: 2006-11-13 18:47:10
Edit : Quote

ToryXX Posts: 495

zuza driver is better then 7.82 outside ,and now also inside ....
thank you for the face....model model model
--
Posted: 2006-11-13 18:49:06
Edit : Quote
Page <  123 ... 442443444 ... 462463464>

New Topic   Topic Locked
Forum Index

Esato home