Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
>
New Topic
>
Topic Locked
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Hybrid Camera Driver for W800i/K750
Bookmark topic
Quote:
With free 8.4 SEMC tool creed is not possible (only flash to firmware) I when I had k750 cid the 49 silver import DE I changed camdriver with SEtool + dongle through script… hour I have k750 cid 36 black ITA
If you know a friend or knowing that it has setool + dongle I say you the procedure of the scripts .
Ciao .
Lucky bastard... ehm
sorry... well, thanks for the information, I´ll consider this option. About the free 8.4 SEMC, how about, if I could get a cracked one somehow? Still no chance?
Magicnet
P.S.: Oh, and actually what is the real and aplicable difference btw red and brown. My friend, she has a brown CID49 K750i. Just pure curiosity.
[ This Message was edited by: Magicnet2 on 2006-11-16 21:01 ]
--
Posted: 2006-11-16 21:58:37
Edit :
Quote
Hello all,
I dont want to add to the torturous amount of pages already, but I have some simple questions to ask.
1) Have any of the official/unofficial firmware mods ever managed to change the unbeliable abysymally horrendously insulting resolution of the k800i video recordings? I really never thought that it would be so ancient.
bye for now,
andy
--
Posted: 2006-11-16 22:14:15
Edit :
Quote
Quote:
On 2006-11-16 21:58:37, Magicnet2 wrote:
Quote:
With free 8.4 SEMC tool creed is not possible (only flash to firmware) I when I had k750 cid the 49 silver import DE I changed camdriver with SEtool + dongle through script… hour I have k750 cid 36 black ITA
If you know a friend or knowing that it has setool + dongle I say you the procedure of the scripts .
Ciao .
Lucky bastard... ehm
sorry... well, thanks for the information, I´ll consider this option. About the free 8.4 SEMC, how about, if I could get a cracked one somehow? Still no chance?
Magicnet
P.S.: Oh, and actually what is the real and aplicable difference btw red and brown. My friend, she has a brown CID49 K750i. Just pure curiosity.
[ This Message was edited by: Magicnet2 on 2006-11-16 21:01 ]
Cid 49 red commercial, Brown prototype creed… you can change camdriver servants setool + dongle via script… semc tool is not good in order to change cam driver is free that original…
With cid the 49 Brown there are problems often, must convert in red and only with setool .
--
Posted: 2006-11-16 22:37:55
Edit :
Quote
Quote:
On 2006-11-16 22:14:15, andy12345 wrote:
1) Have any of the official/unofficial firmware mods ever managed to change the unbeliable abysymally horrendously insulting resolution of the k800i video recordings?
Nope, andy, as far as I know.
Please note that we are mostly K750 or W800 users, so you should ask this question in another thread -- one regarding the K800 -- or start your own.
Cheers!
--
Posted: 2006-11-17 00:04:03
Edit :
Quote
Quote:
Cid 49 red commercial, Brown prototype creed… you can change camdriver servants setool + dongle via script… semc tool is not good in order to change cam driver is free that original…
With cid the 49 Brown there are problems often, must convert in red and only with setool .
Mhm, mhm, mhm, good to know, thanx. About the dongle, do I need some special thing, or is normal usual BTooth device ok? I have the IVT Corp thing with Widcomm drivers. Have BlueSoleil drivers ready to install as well if needed...
By the way, My friend here is working in a phone shop and has access to all sorts of stuff and the service cables as well. So if you by any chance hear of someone desperately in need of service cable for SE and no chance of getting it, I could send it. Would be no problem.
--
Posted: 2006-11-17 05:32:35
Edit :
Quote
@gprsman
All right. After a little time thinking about the SETool and so, I decided to try it with this. So if you are still in the mood of guiding me through the SETools scripts to change the camdriver, it would be SOOOOOOOOOOO gooood.
Wanna try the ZUZA 2 driver. Quite keen on the photos.
--
Posted: 2006-11-17 06:05:17
Edit :
Quote
Zuza 3 has the same compression as Zuza or Zuza 2?
--
Posted: 2006-11-17 06:57:18
Edit :
Quote
You force me to be rought!
@ DARK
DID I MENTION ANYTHING IN CHANGES ?
CAN YOU QUOTE 1 of MY POST WHERE I SAY THAT ZUZA 3 HAVE OTHER COMPRESION?
CAN YOU READ AGAIN FROM PAGE 298 TO 301 TO FIGURE IT OUT?
CAN YOU SEE THAT I WROTE ONLY " Fps Improved"?
PLease, but PLease... reply and tell me... because... if another hurry poster read also in hurry .. I have to anwer to 20 questions similar to yours..
AND WRILY IS NOT THE CASE !!!!!!!!!!!!!!!
I have the bad habbit to anounce the changes.... so read man.. don't hunt gor drivers and then ask questions.
PLeaase man.. will all respect: READ CAREFOUL!! PAY ATENTION!!!
--
Posted: 2006-11-17 07:40:29
Edit :
Quote
Quote:
On 2006-11-17 06:05:17, Magicnet2 wrote:
@gprsman
All right. After a little time thinking about the SETool and so, I decided to try it with this. So if you are still in the mood of guiding me through the SETools scripts to change the camdriver, it would be SOOOOOOOOOOO gooood.
Wanna try the ZUZA 2 driver. Quite keen on the photos.
Excuse my english I have made the translation with my guide the Italian are of haste, only SEtool to us + dongle:
Guide scripts SEtool:
all it is made through script and acting within the file system, obviously it wants the new one camdriver0.dat modified, you to us of are many I I put those heads from me We begin first step backup of the camdriver0.dat that later on we will eliminate. To execute all the scripts in txt putting in misc file and click write script, the read to end in the directory ph_out within the SEtool.
chdir:/ifs/settings/camera/ listfiles:
readfile:camdriver0.dat
readfile camdriver0.dat Hour we remove from directory ph_out the camdriver0.dat read and save it elsewhere. Hour we eliminate the camdriver0.dat from the telephone with this script:
chdir:/ifs/settings/camera/ listfiles:
deletefile: camdriver0.dat
Hour we put in directory ph_out within the modified new SEtool the camdriver rename camdriver0.dat (as it originates it them) Last step we go to write the camdriver0.dat with this script:
wrfile: ph_out camdriver0.dat, /ifs/settings/camera/camdriver0.dat
[ This Message was edited by: gprsman on 2006-11-17 07:37 ]
[ This Message was edited by: gprsman on 2006-11-17 07:40 ]
--
Posted: 2006-11-17 08:33:32
Edit :
Quote
darkchild,
this is the changes in zuza 3 - viewfinder fps improved.
gxg,cool down,man.
woozah.
--
Posted: 2006-11-17 08:34:46
Edit :
Quote
New Topic
Topic Locked
