News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > K800 Firmware Overview Bookmark topic

hi guys.... i love this thread.

after upgrade my firmware to R8BF003, successfull. after 3 month, anyway now... i have problem, suddenly my k800i said "no access to network" ... with icon "no call" on side of signal bar.

1. i try to switch off and on .. nothing happen
2. i try to remove baterry for while , nothing happen.


need guidences or support here...

thanks
Syarif
--
Posted: 2009-08-25 07:42:51
Edit : Quote


Change sim card and see if that helps, otherwise you can reset settings of the phone.
--
Posted: 2009-08-27 10:35:00
Edit : Quote


Hi everyone!

Let me start by saying that I am new to this forum. I have a problem with my SE K800i because it always gets a white screen and then reboot with it disconnected for few seconds and it happens every 5 seconds. I have my K800i about 1 years already in the closet because my SE phone sent back to me by SE and they told me it is "repaired" but it is not repaired.

Now I have tried everything to repair it but no luck.

Can someone make a special little mini-tut about how my SE k800i can get working again?

Now every time I get to read at XS++

20:21:37 | TURN OFF PHONE!
20:21:37 | Hold 'C' button on phone and connect phone NOW.
20:21:37 | You have 30 seconds ...
20:21:37 |
20:21:40 | Baseband ID: 9900
20:21:40 | Protocol Version: 3.1
20:21:40 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:21:40 | ... using IMEI name
20:21:41 |
20:21:41 | Profiling SEMC phone ...
20:21:41 | Platform: DB2020
20:21:41 | OTP CID: 49
20:21:41 | EROM CID: 53
20:21:41 | EROM Color: Red
20:21:41 | IMEI: 35570401xxxxxx
20:21:41 | Phone ID: K800
20:21:41 | Region: EUROPE_4
20:21:41 | CDA: CDA102779/78 R7A
20:21:41 | Firmware Version: R8BA024
20:21:41 | EROM: R3A022
20:21:41 | Ready for operation!

But every time I want to update R8BF003 RED 53 will I read

20:22:23 | TURN OFF PHONE!
20:22:23 | Hold 'C' button on phone and connect phone NOW.
20:22:23 | You have 30 seconds ...
20:22:23 |
20:22:26 | Baseband ID: 9900
20:22:26 | Protocol Version: 3.1
20:22:26 | Warning: IMEI name does not match gdfs name (IMEI: K800 gdfs: K810)
20:22:26 | ... using IMEI name
20:22:26 |
20:22:26 | Profiling SEMC phone ...
20:22:26 | Platform: DB2020
20:22:26 | OTP CID: 49
20:22:26 | EROM CID: 53
20:22:26 | EROM Color: Red
20:22:26 | IMEI: 35570401xxxxxx
20:22:26 | Phone ID: K800
20:22:26 | Region: EUROPE_4
20:22:26 | CDA: CDA102779/78 R7A
20:22:26 | Firmware Version: R8BA024
20:22:26 | EROM: R3A022
20:22:26 | Ready for operation!
20:22:29 | Sorry, your phone is NOT SUPPORTED
20:22:29 | Error: Can not send flash loader
20:22:29 | Error: Flashing failed
20:22:31 | Disconnected ... Unplug the phone

I know it's an old phone, but i just love the looks of it... can someone help me out? i would be really happy for it...

Mini-tut like what firmwares i need, where can i download it en with what can i install it.........


THANNNKKKKSSSS!!!!
--
Posted: 2010-01-27 20:26:25
Edit : Quote




Read here: http://www.esato.com/board/viewtopic.php?topic=170737 and use these files:

K800_R8BF003_MAIN_GENERIC_WI_RED53
K800_R8BF003_FS_EUROPE_4_RED53
HB1-06_Generic_CDA102568_13_R4A_GENERIC_EUROPE_4

Firmware can download from here: http://www.esato.com/board/viewtopic.php?topic=193451#post2891032

--
Posted: 2010-01-27 21:04:21
Edit : Quote


Thank you for your fast replay, sorry for my late replay ..
I will try this as soon as possible and will replay to this forum again!
But thank you very much for the help!

edit*

centur:

Thank you for you great help!

I have the K810 firmware and my white screen+restart problem is solved!

Thank you 1000 times!

Cheers

Edit 2*

Nevermind ... white screen + restart is still the problem .. .:S

--
Posted: 2010-02-05 01:15:13
Edit : Quote


hi
i have a k800 with k810 firmware K810 R8BA024.

i wan't to update to k800 R8BF003 but i have some questions:

1- my phone is cid 52, i need to download R8BF003_RED52 right ? because for my region (europe1) i can only find cid53

2- If i put cid 53 can i still use patches ?

that's all !
Regards
--
Posted: 2010-02-22 15:11:33
Edit : Quote


Hellow i`m new here, my name is Alex and i have an SE k800i about 3 years from Romania`s Vodafone but i fact it is from Germany O2. Sorry for my english but i`m not too good and i will make some mistakes. A few mots ago when i pug-in to my pc, my phone was virused and the problems become. Now i want to resoft and i need some help, i searched all the google and i found thousens of infos but i`m lost. i just downloaded XS++ i connected my phone and this is :

17:43:33| XS++ v3.1 (Darwin) Ready !
18:27:14|
18:27:14| Attempting to open the interface...
18:27:14|
18:27:14| TURN OFF PHONE!
18:27:14| Hold 'C' button on phone and connect phone NOW.
18:27:14| You have 30 seconds...
18:27:14|
18:27:23| Baseband ID: 9900
18:27:23| Protocol Version: 3.1
18:27:23| Phone name detected!
18:27:23|
18:27:23| Profiling SEMC phone...
18:27:23| Platform: DB2020
18:27:23| OTP CID: 49
18:27:23| EROM CID: 49
18:27:23| EROM Color: Red
18:27:23| IMEI: 35471601xxxxxx
18:27:23| Phone ID: K800
18:27:23| Region: EUROPE_2
18:27:23| CDA: CDA102511/74 R10A
18:27:23| Firmware Version: R1EG001
18:27:23| EROM: R3A016
18:27:23| Ready for operation!
18:27:36| User chose NOT to update EROM CID!

what i must do next ?! to upgrade ? and how can i install Generic Mediterrain
--
Posted: 2010-03-07 17:51:40
Edit : Quote


What about changelog for R8BC004 and R8BF003 ?
R8BA024 is the last one, presented in main post.
--
Posted: 2017-01-09 07:28:44
Edit : Quote


I remember this fone model has the BEST camera out in the market during it's release ! Better than it's counterparts: Nokia, Motorola and Samsung !
--
Posted: 2022-05-05 13:51:54
Edit : Quote

---

New Topic   Reply

Forum Index