News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Symbian phones > Unbranding a M600/W950/P990/P1/W960 for free with xs++ & seus! Bookmark topic



yeas, i have, i had many phones like w950i, m600i, p990i, and p1i, cause i am selling it and used SEUS... Ok, i will try again
--
Posted: 2008-03-10 15:20:04
Edit : Quote


still same problem. This is what i do:
1) I remove battery and reinsert it
2) Then i press "C" and hold it down
3) In XS++ i press connect
and then i see:

18:03:38| XS++ v3.1 (Darwin) Ready !
18:03:38| Executed on Microsoft Windows XP
18:04:06| Executing SEMC Smartphone Operations!
18:04:06| Please hold boot key ('@' or 'C') and connect device...
18:04:06| Master Port detected: COM9
18:04:06| Slave Port detected: COM10
18:04:06| Opening Port!
18:07:32| Init Master Failed!
18:07:32| Error: Cannot open phone communication port
18:07:34| Disconnected... Unplug the phone

what i do wrong?

[ This Message was edited by: Robis on 2008-03-10 16:13 ]
--
Posted: 2008-03-10 17:12:49
Edit : Quote


have you tried another usb socket, or another cable?
--
Posted: 2008-03-10 17:36:02
Edit : Quote


"Init Master Failed!" seems to be the key, looks like the driver for the Master port is faulty or missing, try reinstalling the drivers - you'll need to have the phone connected in flash mode to do this btw.

If this doesn't work then I'd completely uninstall/reinstall the pcsuite, including making sure there are no copies of the drivers left in your windows directory (they all start with the letters zebr - to help you search), and manually deleting the relavant folders under program files. Then download a fresh copy of the lastest version from SE....

The USB port could be a possibility though so check this first.
--
Posted: 2008-03-10 18:53:49
Edit : Quote


well, the problem i fixed yesterday, in PC was pluged other cable of camera (the camera wasn't connected), so i took it out and then i could make GW1 or GW2. But still is a small problem- when i made GW2 and updeited with SEUS, was CXC162108 R6G04 , but with GW2 pach wasn't Lithuania language. When i made GW1 and updeited, i had Lithuania language, but the last soft after SEUS was just CXC162108 R6F41. So i made again GW2 and downlouded language pack from http://www.sonyericsson.com/c[....]twaredownloads/p1i?cc=gb&lc=en but i couldn't install it in my phone with PC suite, how to fix this problem? :|



[ This Message was edited by: Robis on 2008-03-11 10:15 ]
--
Posted: 2008-03-11 11:11:15
Edit : Quote


any ideas?
--
Posted: 2008-03-13 11:27:36
Edit : Quote


What's actually the problem?
--
Posted: 2008-03-13 13:26:36
Edit : Quote




with GW1 i can have only R6F41SW
--
Posted: 2008-03-13 17:12:53
Edit : Quote


For people trying to unbrand their M600i, using XS++ and the CDA change, then trying to update via SEUS, it wont work.

There is a problem with it at the moment, according to Sony Ericsson...

Thank you for contacting the Sony Ericsson Call Centre.

I do apologize for the inconvenience caused here. We are aware of this issue and are in the process of getting this issue resolved.
The only other way to perform a Update Service to the handset, is to take it in to a Service Centre, where our phone techs there can perform this for you.
Refer to the link below for a list of Sony Ericsson authorised service centres in Australia.
http://www.sonyericsson.com/s[....]&ver=4000&template=ps5&zone=ps

*sigh* Now who the hell kows when it'l be fixed... It's annoying, because I asked them when, and they just ignored the question.

How often to they release new Update Software?



--
Posted: 2008-03-15 09:09:27
Edit : Quote




[ This Message was edited by: Emprazol on 2008-03-24 12:20 ]
--
Posted: 2008-03-22 14:31:34
Edit : Quote

---

New Topic   Reply

Forum Index