Esato Mobile
Sony Ericsson / Sony : General : My phone is dead and wont charge
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > General > My phone is dead and wont charge Bookmark topic
Page <  123456

CrazyBus Posts: 30

if you keep trying and cant get it to work just drop it into a service centre. Hopefully they wont notice it has w800i firmware. I took mine and they had no problems in fixing it. And i got it back in 3 days.
--
Posted: 2005-12-08 23:59:27
Edit : Quote

macboy Posts: 62

Thats what im going to end up doing if it doesnt work till tonight.

btw, did you guys use the regular DCU60 data cable that comes with the phone or a service cable bought off davinci to write the GDFS???

thanks
--
Posted: 2005-12-09 00:36:52
Edit : Quote

RachelC Posts: 2

Quote:
On 2005-12-09 00:36:52, macboy wrote:
btw, did you guys use the regular DCU60 data cable that comes with the phone or a service cable bought off davinci to write the GDFS???

thanks


I'd like to know that too actually. Can i use the silver data cable that came in the box or do I need hte 2 in 1 cable thing from davinci to do the fix??
--
Posted: 2005-12-09 16:53:17
Edit : Quote

jcpsad Posts: > 500

DCU-60 can be used for updating the firmware... at least on SEUS... don't know about DaVinci...
--
Posted: 2005-12-09 18:49:20
Edit : Quote

tr1t0n Posts: 19

Hi all

Sorry for not mention it before but I used the cable which Davinci sells.http://www.davinciteam.com/index.php?page=datacable. I dont know if the cable that follows the phone would do the trick. Hope anyone can confirm if it does. Sorry again for not clearing this up earlier in the thread. Hope you all get it to work.
--
Posted: 2005-12-09 21:01:34
Edit : Quote

souljav Posts: 27

Yer Hello wud just like to say that this has just happend to me today as well randomly, mn i fink its stupid y is it suddnely happening nw? has to be something in the firmware! and ways of fixing this let me know thanks

The White screen cmes on for 2 seconds, dn the phone just dies and screen goes Black and deaD!
--
Posted: 2005-12-09 21:05:41
Edit : Quote

nitwit09 Posts: 10

hi, i talked to some programmer on Davinci and he said that you can only repair the GDFS with the Service Cable. So, those of you, who are facing this problem shud take it to a service center. I think, that wud be cheaper for u. Anyway, you can also buy the same cable from here: http://www.kobonet-netshop.co.uk/2in1_usb.php . If you are in EU, US or Australia, then you will recieve the cable in 5-6 days. Its much faster compared to Davinci. Those guys take too much time.
--
Posted: 2005-12-12 16:26:28
Edit : Quote

tr1t0n Posts: 19

Good to know. Thanks for the Info
--
Posted: 2005-12-12 18:27:38
Edit : Quote
Page <  123456

New Topic   Reply
Forum Index

Esato home