News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > GPRS, WAP, MMS and Email setup > POP3 e-mail settings : let's post them here!!! Bookmark topic

SBCGLOBAL.NET Email using my Nokia 3650

Access Point: T-mobile
Email Address: username@sbcglobal.net
Outgoing Mail Server: smtp.sbcglobal.yahoo.com
Username:username@sbcglobal.net
Password:XXXXX
Incoming Mail Server: pop.sbcglobal.yahoo.com
Mailbox Type: POP3

That got me into my mailbox without any problems.
I'd imagine the same would work for Yahoo accounts also.
--
Posted: 2003-09-22 17:39:51
Edit : Quote


I use ATT in the U.S. and have sent email from several different POP3 accounts using pdasmtp.attwireless.net as the outgoing server. I curently use Netbeam for my isp.
--
Posted: 2003-11-11 19:52:36
Edit : Quote


Sony Ericsson P800 for smart users (PH Only)

#####################################
# Sony Ericsson P800 for smart users (PH Only) #
# Internet, GPRS setting, MMS setting, Mail config. #
# #
# Courtesy of PHTeam #
# by patz@patz0r.org #
#####################################

INTERNET SETTINGS
1. From the main menu go to the Control Panel
2. From Connections go to Internet Accounts
3. Click on New to create a new account and enter the following:
Account Name: Internet
Connection Type: GPRS
4. Click on Advanced and enter the following information at the server
setting:
Uncheck "Username & password required" box
Username: leave blank
Password: leave blank
Address: internet
5. Then click on log in and activate both IP address & DNS address
automatically. (check boxes)
6. Click Done three times to go back to Control Panel menu
7. The go to WAP accounts
8. Click on New and enter the following information at the server setting:
Account name: Internet
Internet account: Internet
Activate Use Proxy: Check box
Address: 10.102.61.46
Port: 9201
Username: leave blank
Password: leave blank
9. Click on Done and go to Preferred tab and Click "Use WAP account" box
10. Be sure that your preferred account is SmartGPRS
11. Go back to the main menu

GPRS SETTINGS
1. From the main menu go to the Control Panel
2. From Connections go to Internet Accounts
3. Click on New to create a new account and enter the following:
Account Name: SmartGPRS
Connection Type: GPRS
4. Click on Advanced and enter the following information at the server
setting:
Uncheck "Username & password required" box
Username: leave blank
Password: leave blank
Address: smart1
5. Then click on log in and activate both IP address & DNS address
automatically. (check boxes)
6. Click Done three times to go back to Control Panel menu
7. The go to WAP accounts
8. Click on New and enter the following information at the server setting:
Account name: SmartGPRS
Internet account: SmartGPRS
Activate Use Proxy: Check box
Address: 10.102.61.46
Port: 9201
Username: leave blank
Password: leave blank
9. Click on Done and go to Preferred tab and Click "Use WAP account" box
10. Be sure that your preferred account is SmartGPRS
11. Go back to the main menu

MMS SETTINGS
1. From the main menu go to the Control Panel
2. From Connections go to Internet Accounts
3. Click on New to create a new account and enter the following:
Account Name: SmartMMS
Connection Type: GPRS
4. Click on Advanced and enter the following information at the server
setting:
Uncheck "Username & password required" box
Username: leave blank
Password: leave blank
Address: mms
5. Then click on log in and activate both IP address & DNS address
automatically. (check boxes)
6. Click Done three times to go back to Control Panel menu
7. The go to WAP accounts
8. Click on New and enter the following information at the server setting:
Account name: SmartMMS
Internet account: SmartMMS
Activate Use Proxy: Check box
Address: 10.102.61.46
Port: 9201
Username: leave blank
Password: leave blank
9. Click on Done and go to Preferred tab and Click "Use WAP account" box
10. Be sure that your preferred account is SmartGPRS
11. Go back to the main menu

Email configuration
1. Press Control Panel
2. Go to Messaging Accounts
3. Select New
4. Enter Account Name : --enter account name
(joycs@hotpop.com)
Your name : --enter name (joy)
Email Address : -- enter email account
(joycs@hotpop.com)
Connection Type : --select connection type protocol (POP3/
Imap4)
Internet Account : --select account (Internet)
5. Select Inbox
Enter Username : ISP dependent
(joycs@hotpop.com)
Password -- account dependent
(XXXXXX)
Incoming server address : ISP dependent mail server
(pop.hotpop.com)
Download
Smaller than : 100kb
6. Select Outbox
Enter Outgoing mail server
: ISP
dependent mail server (smtp.hotpop.com)
Use SMTP authentication
Use inbox login details
Username : ISP dependent
(joycs@hotpop.com)
Password : -- account
dependent (XXXXXX)
7. Press Done


--
Posted: 2003-11-18 15:48:46
Edit : Quote


Hi guys, nice thread.

Found something out yesterday that might be of some relivance to somebody! I use Virgin Mobile and although they tell me I can't use email through my phone, I got it to work 110%. Here what I did. I got the phone on T-Mobile (so I got a T-Mobile SIM with it) I set up my email account with hotPOP (at http://www.hotpop.com), recived and sent 1 e-mail with T-Mobile GPRS, swaped SIMs and changed the Connect with part... to Virgin Mobile CSD. If I has tried to connect before with my Virgin SIM, then I get "No POP Server Found" or "No SMTP Server Found". Now, it works 100%. Its a bit slow but saves me swapping SIMs and keeping both topped up. Good Luck if it helps anyone else!

djp :)
--
Posted: 2003-11-18 22:22:24
Edit : Quote


hi,
I've just tried the hotmail settings and they didn't work, they say that the server can't be found, I do live in the UK so I was thinking maybe the server is now a dead link?
--
Posted: 2003-12-05 01:41:31
Edit : Quote


friends, i'm new here from indonesia

i'm connect using ericsson r520 gprs
provider satelindo matrix
apn: satelindogsm.com
ip: 202.152.162.250

i still confuse how to open my email from my phone, are there any one can help me?
i'm using yahoo.com
as far as i know i have to pay yahoo to open my email via phone
are there any email that free?

thx
--
Posted: 2003-12-17 18:50:30
Edit : Quote


Anybody use Supanet.com ? I used to be able to access my e-mail through mail2wap, but now it just comes up with a gateway error message. If you have the settings for Supanet (I can't find them), can you post them here ?
--
Posted: 2003-12-23 18:20:31
Edit : Quote


hey so do u guys have the settings for hotmail or yahoo throught the free wap gprs settings on tmobile in US for my p900. none of those previous settings work for me. i heard that with the tmobile free gprs wont work and u need an actual app to get it to work. i dont really have money for pay for those. my internet works and everything and aim works on port 80. i dont know if the other ports work tho.

[ This Message was edited by: sdsviet on 2003-12-26 11:46 ]
--
Posted: 2003-12-26 12:43:16
Edit : Quote


Setting Up GPRS Internet Access + WAP + MMS with Cingular Wireless on P800/900
==============================================================================

01) Go to Control Panel.
02) Click on the "Connections" tab.
03) Click on "Internet Accounts" and make sure you are under the "New" tab.
04) Click on "New."
05) Enter any name for your new account, for example "Cingular WAP."
06) Under "Connection Type", choose "GPRS"

07) Click on Advanced and under the "Server" tab, do the following:
a) Check the box that says "Username and password required:"
b) Enter the following information...
Username: WAP@CINGULARGPRS.COM (All Capital letters)
Password: CINGULAR1 (All Capital letters)
Address: wap.cingular (All small letters)

08) Click on the "Log In" tab and make sure that:
a) The "Get IP address automatically" box is CHECKED.
b) The "Get DNS address automatically" box is CHECKED.

09) Click on the "Proxy" tab and make sure that:
a) The "Use Proxy Server" box is UN-CHECKED

10) Click on the "Other" tab and make sure that:
a) The box "Enable PPP extenstions" is CHECKED.
b) Under the "Authentication" drop-down menu, choose "Secure."

11) Click on the QoS and make sure that:
a) The "Header compression" box is UN-CHECKED.
b) "Precedence" is set to "Subscribed."
c) "Delay" is set to "Subscribed."
d) "Reliability" is set to "Class 3."
e) "Peak rate" is set to "Subscribed."
f) "Mean rate" is set to "Subscribed."

12) Click "Done" twice to go back to the "Internet Accounts" window.

13) Click on the "Other" tab:

Set "Dialup timeout" to "Never"
Set "GPRS timeout" to "Never"
Set "Preferred mode" to "Automatic"

14) Then click "Done" once to go back to the "Control Panel" window.

15) Make sure you are under the "Connections" tab.

16) Click on "Messaging Accounts."
17) Click the "MMS" tab.
18) Under "Service Center Address" type "mmsc.cingular.com" (All lower case).
19) Set "WAP account" to "Cingular WAP" (which we created in the above steps).
20) Make Sure that "Automatic" is set to "On."
21) You can set "Download size" to "No restriction" if you want (optional).
22) Click on "Advanced."
23) Under the "Send" tab, make sure that:
a) "Validity period" is set to "Maximum."
b) "Priority" is set to "Normal."
c) "Conformance" is set to "Normal."
d) The "Hide number" box is UN-CHECKED.
e) The "Read report" box is UN-CHECKED.
f) The "Delivery report" box is UN-CHECKED.
e) The "Reply with history" box is UN-CHECKED.

24) Click on the "Receive" tab and make sure that:
a) The "Allow delivery notification" box is CHECKED.
b) The "Allow read notification" box is CHECKED.
c) The "Advertisements" box is UN-CHECKED.
d) The "Information" box is UN-CHECKED.
e) The "Anonymous senders" box is UN-CHECKED.

25) Click "Done" twice to go back to the "Control Panel" window.
26) Make sure you are under the "Connections" tab.
27) Click on "WAP Accounts" and make sure you are under the "Basic" tab.
28) Click "New."
29) Enter the following information:
a) Account Name "Main WAP Account"
b) Set "Internet account" to "Cingular WAP."
c) Make sure the "Use Proxy" box is CHECKED.
d) Enter the following:
Address: 66.209.11.61
Port: 9201
Username: WAP@CINGULARGPRS.COM (All upper case)
Password: CINGULAR1 (All lower case)

30) Click "Done" to go back to the "WAP accounts" window.
31) Click on the "Preferred" tab.
32) Make sure that the "Use WAP account" is UN-CHECKED (optional, I prefer it).
33) Click "Done" and Congratulations you really are DONE !!!

Now Turn off your phone and turn it back on again. Then try to send an MMS
message. To send an an MMS message, all you need is to enter the person's phone
number (including area code) in the "To: " box.

Good luck...

--
Posted: 2003-12-28 02:21:28
Edit : Quote


i have set my t610 which is on o2 in the uk to use freeserve email i can recieve but when u try to send it says cannot find sending server
--
Posted: 2003-12-29 12:35:57
Edit : Quote

---

New Topic   Reply

Forum Index